Nincs szín - Két színű, 7,5 hüvelykes E-ink kijelző e-papír HAT Raspberry Pi 2B / 3B // W-hez

Two Color 7.5inch E-ink Display e-Paper HAT For Raspberry Pi 2B/3B// W
Features:
This 7.5inch E-Ink Display HAT is specially designed for Raspberry Pi. Suitable for Raspberry Pi 2B/3B/3B // W.
Features the resolution of 640 * 384 and its embedded controller, easy to use via SPI interface.
SPI interface for connecting with other controller boards, for Raspberry//Nucleo, etc.
With its wide viewing angle(>170°) and clear display even under direct sunlight.
Ultra-low power consumption (standby power: <0.017mW) - Almost only need to consume power when refreshing.(Refresh power: 38mV(typ.)
E-Ink screen module is widely used for shelf labels, industrial meters and other display applications.
Comes with development resources(Wiki : www.waveshare.com/wiki/7.5inch_e-Paper_HAT) and manuals(examples for Raspberry//STM32).
Specification:Type: 7.5inch E-Ink Display HAT
Suitable brand: For Raspberry Pi
Interface: SPI
Working voltage: 3.3V
Dot Pitch: 0.255 * 0.255
Resolution: 640 * 384
Grey level: 2
Refresh power: 38mV(typ.)
Standby power: <0.017mW
Viewing angle: >170°
Full refresh time: 6s
Interface:VCC: 3.3V
GND: GND
NC: NC
DIN: SPI MOSI pin
CLK: SPI SCK pin
CS: SPI chip selection, low active
DC: Data/Command selection (high for data, low for command)
RST: External reset, low active
BUSY: Busy status output, low active
Material: PCB Tempered Glass
Color: Black and White
Weight: Approx. 182g
Display size: Approx. 163.2 * 97.92mm / 6.4 * 3.9in
Outline size: Approx. 170.2 * 111.2mm / 6.7 * 4.4in
Package list:1 * 7.5inch E-Paper Hat
1 * E-Paper Driver Board
1 * PH2.0 20cm 8Pin Cable
1 * RPi Screws Kit(2Pcs)
Note:Please allow slight error due to manual measurement. Thanks for your kind understanding.