A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
 
Product Name: 8CH 0-5V 0-10V 4-20MA Voltage Current Signal Generator Detector RS485 to ADC DAC Converter Modbus RTU IO Module for PLC
 
 
Package inlcuded:
  1 x N4DBA06 12V 8-channel Analog Digital ADC DAC IO module
 
Description:
 
1Working voltage: DC 12 (DC 12-25V recommended power supply with small ripple) 
 
2 Working current: 14-34MA (Related to the output current) 
 
3 MODBUS RTU instruction support 03 06 function code 
 
4 3 analog input channels, 1 switch input channel: Vi1 is 0-5V voltage input, Vi2 is 0-10V voltage input, Ii is 0-20MA current input; DiP DiN is switch input port (NPN/PNP Photoelectric isolation input) 
 
5 3 analog output channels, 1 switch output channel: Vo1 is 0.05-5V voltage output (<20MA), Vo2 is 0.1-10V voltage output (<20MA), Io is 0.5-20MA current output; DoP DoN is Switch output port (maximum drive current 500MA, can directly drive relays and solenoid valves) 
 
6 Voltage resolution is 0.01V, measurement accuracy is 1% ; Current resolution is 0.01MA, measurement accuracy is 1% ; if the error is greater than 1% , it can be calibrated 
 
7 MODBUS commands can be made serial HyperTerminal (serial assistant)  OR PLC Enter; 
 
8 Under the MODBUS command mode, it can support up to 247 devices in parallel
 
9 Size: 60 * 72 * 18mm (Only PCB Board); 63 * 87 * 42mm (with Din Rail Box) 
10 Weight: 33g (Only PCB Board); 85g (with Din Rail Box)
 
 
Instruction manual Please ask us after the purchase
 
DIN rail Box parameters:
Product model: UM72 
Color: green
Width: suitable for PCB board width UM72(72mm)
Insulation grade: flame-retardant VO grade
Backplane length: suitable for 60 mm PCB boards
Net weight: 52g
Installation: DIN35 and C45 rail
 
 
Note:
1 Channel 1 (Vo1) output voltage range is 0.05V-5V, channel 2 (Vo2) output voltage range is 0.1V-10V, channel 3 (Io) output current range is 0.5-20MA    
2 At the moment of power-on, the current and voltage output ports have 10-20MS high pulses      
3 DiP DiN is a passive switch input port (see the figure below for wiring)    
4 DoP DoN is a passive switch output port (see the figure below for wiring)
 
Application
  
4-20MA/0-20MA Input and output devices
0-5V/0-10V Input and output devices
Current and voltage signal transmission measuring
Automated industry PLC
Smart Home,Home Automation ;
Identification system;
RS485 Remote monitoring;
Multimeter voltmeter
Interface introduction
 
 
 
 
1005002171417610/2 - shop1525466