- -46%
0,02H-10Mhz állítható négyzethullámú impulzusjelgenerátor modul csere MCU LM358 CD4017 NE555 PWM AD9850 AD9851 DDS
0,02H-10Mhz állítható négyzethullámú impulzusjelgenerátor modul csere MCU LM358 CD4017 NE555 PWM AD9850 AD9851 DDS
280 Ft
46% megtakarítás
518 Ft
Nincs adó
Product Name: 0.02H-10Mhz Adjustable Square Wave Pulse Signal generator Module replace MCU LM358 CD4017 NE555 PWM AD9850 AD9851 DDS controller
We have 1Hz~10kHz Frequency continuously adjustable Version
Package inlcuded:
1 x 0.02Hz~10Mhz Adjustable signal generator
Description:
VCC : DC 5V(3.8~5.V) Positive power supply
GND : Negative power
Button B : Fine tune frequency
Signal output : 0.02Hz~10Mhz(Accuracy:0.6% ) Square wave output(5V TTL Level,maximum output current 20MA).
Button A : Coarse tune frequency
Mode selection : Connection,0.02Hz~1Khz Low-frequency square-wave output.
Disconnection,160hz~10Mhz High-frequency square-wave output.
PCB size : 17*12mm
High-frequency step is to divide an integer multiple of 10Mhz,You can adjust the frequencies are:10Mhz,10Mhz/2(5Mhz),10Mhz/3(3.3Mhz)...10Mhz/65500(152hz).
Low-frequency step is to divide an integer multiple of 1Khz,You can adjust the frequencies are:1Khz,1Khz/2(500hz),1Khz/3(333hz)...1Khz/65500(0.015Hz).
USE:
Short press (less than 2S) be slow to adjust,Short press once, Frequency slow adjustment(Frequency decreases).
Long press (more than 2S) for fast adjustment,When the frequency is adjusted to a minimum.
Short press once again, become the highest frequency
Back Pin Diagram:
Wiring Diagram:
10Mhz Waveform:
1Mhz Waveform:
100Khz Waveform:
1Khz Waveform:
0.9hz Waveform:
We have 1Hz~10kHz Frequency continuously adjustable Version
Package inlcuded:
1 x 0.02Hz~10Mhz Adjustable signal generator
Description:
VCC : DC 5V(3.8~5.V) Positive power supply
GND : Negative power
Button B : Fine tune frequency
Signal output : 0.02Hz~10Mhz(Accuracy:0.6% ) Square wave output(5V TTL Level,maximum output current 20MA).
Button A : Coarse tune frequency
Mode selection : Connection,0.02Hz~1Khz Low-frequency square-wave output.
Disconnection,160hz~10Mhz High-frequency square-wave output.
PCB size : 17*12mm
High-frequency step is to divide an integer multiple of 10Mhz,You can adjust the frequencies are:10Mhz,10Mhz/2(5Mhz),10Mhz/3(3.3Mhz)...10Mhz/65500(152hz).
Low-frequency step is to divide an integer multiple of 1Khz,You can adjust the frequencies are:1Khz,1Khz/2(500hz),1Khz/3(333hz)...1Khz/65500(0.015Hz).
USE:
Short press (less than 2S) be slow to adjust,Short press once, Frequency slow adjustment(Frequency decreases).
Long press (more than 2S) for fast adjustment,When the frequency is adjusted to a minimum.
Short press once again, become the highest frequency
Back Pin Diagram:
Wiring Diagram:
10Mhz Waveform:
1Mhz Waveform:
100Khz Waveform:
1Khz Waveform:
0.9hz Waveform:
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
