- -40%
3,2 hüvelykes TFT LCD kijelző pajzs készlet érintőképernyő, beépített LM75 érzékelő modul toll TF kártya
3,2 hüvelykes TFT LCD kijelző pajzs készlet érintőképernyő, beépített LM75 érzékelő modul toll TF kártya
2 375 Ft
40% megtakarítás
3 959 Ft
Nincs adó
Description
NOTE:The screen may have a bright pixel that will light all day on but it does not affect the application.
If you buy it, that means you know this exactly and accept it, please know.
No additional modules, this kit can achieve rich projects such as character display, image reading and display, touch sketchpad, temperature measurement and display.
The program, expansion shields, IDE is compatible for MEGA2560 R3.
The kit includes a 3.2 inch TFT touch screen expansion board using standard Shield interface and it has good compatibility. Itintegrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.
With GPRS module, you can design for DIY phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
- Can use it directly to display characters, graphics and BMP format images. And touch controlling is available;
- Compatibility: As the SD card is connected to SPI pins of ICSP interface, it is compatible for Arduino.
- Library: TFTLibrary and Adafruit_GFX;
- Touch screen type: resistive touchscreen.
- Touch Pen: length is 9cm;
- Resolution: 240X320;
- Display size: 3.2 inch;
- Operating voltage: 5V;
- Logic level: 5V / 3.3V;
- On-board 3.3V / 300mA regulator circuit;
- Operating current: the maximum is 150mA
- Use the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 / D1 / D2 / D3 is available, please refer to the product schematics for the details.
- Onboard Micro SD slot, support Micro SD / TF Card;
- Onboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C
- Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor.
Photos
Part List(Schematics and program can be sent via e-mail,Please contact us)
1 x Shield
1 x Board
1 x USB cable (50cm)
1 x Micro SD card (256MB)
1 x Touch pen
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
NOTE:The screen may have a bright pixel that will light all day on but it does not affect the application.
If you buy it, that means you know this exactly and accept it, please know.
No additional modules, this kit can achieve rich projects such as character display, image reading and display, touch sketchpad, temperature measurement and display.
The program, expansion shields, IDE is compatible for MEGA2560 R3.
The kit includes a 3.2 inch TFT touch screen expansion board using standard Shield interface and it has good compatibility. Itintegrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.
With GPRS module, you can design for DIY phone.
With NFC reader module, you can create access control systems with the photos show.
With voltage and current sensor, you can make oscilloscope.
- Can use it directly to display characters, graphics and BMP format images. And touch controlling is available;
- Compatibility: As the SD card is connected to SPI pins of ICSP interface, it is compatible for Arduino.
- Library: TFTLibrary and Adafruit_GFX;
- Touch screen type: resistive touchscreen.
- Touch Pen: length is 9cm;
- Resolution: 240X320;
- Display size: 3.2 inch;
- Operating voltage: 5V;
- Logic level: 5V / 3.3V;
- On-board 3.3V / 300mA regulator circuit;
- Operating current: the maximum is 150mA
- Use the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 / D1 / D2 / D3 is available, please refer to the product schematics for the details.
- Onboard Micro SD slot, support Micro SD / TF Card;
- Onboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C
- Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor.
Photos
Part List(Schematics and program can be sent via e-mail,Please contact us)
1 x Shield
1 x Board
1 x USB cable (50cm)
1 x Micro SD card (256MB)
1 x Touch pen
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
