- -43%
OPEN-SMART MPU6050 6 DOF 3 tengelyes giroszkóp 3 tengelyes digitális gravitációs érzékelő I2C háromtengelyes
OPEN-SMART MPU6050 6 DOF 3 tengelyes giroszkóp 3 tengelyes digitális gravitációs érzékelő I2C háromtengelyes
642 Ft
43% megtakarítás
1 127 Ft
Nincs adó
Description
There is a triple-axis MEMS gyroscope and a triple-axis MEMS accelerometer built in the MPU6050.
You can solder it onto experiment PCB or your own design PCB easily with the help of the SMD pins.
Features:
- Compatibility: Because the logic level is 3.3V 5V compatible, it is compatible for Arduino. or other 5V or 3.3V MCU.
- Module type: 3-Axis Accelerometer 3-Axis Gyro
- Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec
- Interface: I2C
- I2C address: 0x68(default) can change to be 0x69 by solder the resistor onboard.
- Operating voltage: 3.2 – 5.5V
- Logic level: 5V or 3.3V (onboard 3.3V level converter circuit)
- Ultra Low Power: about 6mA in measurement mode, 0.2mA in standby@ 3.3V
- IO Port Package: Both SMD and PAD are available, and the pin pitch is 2.54mm.
- Application: HDD shock protection, Vibration sensor, Game controller input, Robotics, Smart vehicles
Photos
Part List (Schematics and program can be sent,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
There is a triple-axis MEMS gyroscope and a triple-axis MEMS accelerometer built in the MPU6050.
You can solder it onto experiment PCB or your own design PCB easily with the help of the SMD pins.
Features:
- Compatibility: Because the logic level is 3.3V 5V compatible, it is compatible for Arduino. or other 5V or 3.3V MCU.
- Module type: 3-Axis Accelerometer 3-Axis Gyro
- Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec
- Interface: I2C
- I2C address: 0x68(default) can change to be 0x69 by solder the resistor onboard.
- Operating voltage: 3.2 – 5.5V
- Logic level: 5V or 3.3V (onboard 3.3V level converter circuit)
- Ultra Low Power: about 6mA in measurement mode, 0.2mA in standby@ 3.3V
- IO Port Package: Both SMD and PAD are available, and the pin pitch is 2.54mm.
- Application: HDD shock protection, Vibration sensor, Game controller input, Robotics, Smart vehicles
Photos
Part List (Schematics and program can be sent,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
