• -41%

OPEN-SMART továbbfejlesztett verzió 5V / 3.3V (CH340G) ATMEGA168P fejlesztőkártya USB-kábellel Arduino-kompatibilis

909 Ft 41% megtakarítás
1 541 Ft
Nincs adó
Description
This is high quality MCU board which is improved compatible development board based on ATMEGA168P for Arduino. Black board and the colorful female pin headers make your project more impressive and unique. It is very popular for project production.
There's a switch to choose the system supply voltage, 3.3V or 5V, which is very useful if you want to set the system to 3.3V to save power.
For example, you want to connect directly 3.3V LCD / ESP8266 wifi-compatible module / BME280 barometric sensor module without level conversion module for Arduino.
You can set the board to be 3.3V level.
Features:
- IDE Board Type: for Duemilanove or Diecimila
- IDE processor: ATmega168.
- The program, expansion shields, IDE is compatible for R3 Board.
- Use multi-color female header so that the interface is easy to identify and particularly noticeable.
- Use Through Hole Mount type B USB connector,ruggedness and long service life.
- Onboard 500mA resettable fuse to protect power supply from the USB port and the DC jack at the same time.
- Leads out more GND, 5V pins, and I2C interface, so it is more convenient to connect it to peripheral modules without additional IO expansion shield.
- You can burn the program with the type A male to type B male cable.
- Onboard 5V and 3.3V voltage regulator circuit。
- Onboard DC jack socket and it can be powered by an external battery so it allows you to show your projects in the outdoor without the PC.
- This board is ideal for learners want to learn for it and make creative projects.
- On-board test indicator LED, and you can program to control it.
- USB interface driver chip: CH340G, compatible with win7, win8, linux, MAC OS.
- Microcontroller: Atmel ATmega168P
- Working voltage: 5V or 3.3V.
- IO logic voltage: 5V or 3.3V
- Working current: 500mA (Max)
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Flash Memory: 16KB of which 2 KB used by bootloader
- SRAM: 2KB
- EEPROM: 1KB
- Clock Speed: 16 MHz
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Board
1 x USB cable(30cm)
               
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
Mennyiség
Add to Compare
Add to Wishlist

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

OPEN-SMART továbbfejlesztett verzió 5V / 3.3V (CH340G) ATMEGA168P fejlesztőkártya USB-kábellel Arduino-kompatibilis
OPEN-SMART Improved Version 5V / 3.3V (CH340G) ATMEGA168P Development Board with USB Cable Compatible for Arduino
Description
This is high quality MCU board which is improved compatible development board based on ATMEGA168P for Arduino. Black board and the colorful female pin headers make your project more impressive and unique. It is very popular for project production.
There's a switch to choose the system supply voltage, 3.3V or 5V, which is very useful if you want to set the system to 3.3V to save power.
For example, you want to connect directly 3.3V LCD / ESP8266 wifi-compatible module / BME280 barometric sensor module without level conversion module for Arduino.
You can set the board to be 3.3V level.
Features:
- IDE Board Type: for Duemilanove or Diecimila
- IDE processor: ATmega168.
- The program, expansion shields, IDE is compatible for R3 Board.
- Use multi-color female header so that the interface is easy to identify and particularly noticeable.
- Use Through Hole Mount type B USB connector,ruggedness and long service life.
- Onboard 500mA resettable fuse to protect power supply from the USB port and the DC jack at the same time.
- Leads out more GND, 5V pins, and I2C interface, so it is more convenient to connect it to peripheral modules without additional IO expansion shield.
- You can burn the program with the type A male to type B male cable.
- Onboard 5V and 3.3V voltage regulator circuit。
- Onboard DC jack socket and it can be powered by an external battery so it allows you to show your projects in the outdoor without the PC.
- This board is ideal for learners want to learn for it and make creative projects.
- On-board test indicator LED, and you can program to control it.
- USB interface driver chip: CH340G, compatible with win7, win8, linux, MAC OS.
- Microcontroller: Atmel ATmega168P
- Working voltage: 5V or 3.3V.
- IO logic voltage: 5V or 3.3V
- Working current: 500mA (Max)
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Flash Memory: 16KB of which 2 KB used by bootloader
- SRAM: 2KB
- EEPROM: 1KB
- Clock Speed: 16 MHz
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Board
1 x USB cable(30cm)
               
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
32756378416 - opensmart
32756378416
Write your review

Write your review

OPEN-SMART továbbfejlesztett verzió 5V / 3.3V (CH340G) ATMEGA168P fejlesztőkártya USB-kábellel Arduino-kompatibilis

Description
This is high quality MCU board which is improved compatible development board based on ATMEGA168P for Arduino. Black board and the colorful female pin headers make your project more impressive and unique. It is very popular for project production.
There's a switch to choose the system supply voltage, 3.3V or 5V, which is very useful if you want to set the system to 3.3V to save power.
For example, you want to connect directly 3.3V LCD / ESP8266 wifi-compatible module / BME280 barometric sensor module without level conversion module for Arduino.
You can set the board to be 3.3V level.
Features:
- IDE Board Type: for Duemilanove or Diecimila
- IDE processor: ATmega168.
- The program, expansion shields, IDE is compatible for R3 Board.
- Use multi-color female header so that the interface is easy to identify and particularly noticeable.
- Use Through Hole Mount type B USB connector,ruggedness and long service life.
- Onboard 500mA resettable fuse to protect power supply from the USB port and the DC jack at the same time.
- Leads out more GND, 5V pins, and I2C interface, so it is more convenient to connect it to peripheral modules without additional IO expansion shield.
- You can burn the program with the type A male to type B male cable.
- Onboard 5V and 3.3V voltage regulator circuit。
- Onboard DC jack socket and it can be powered by an external battery so it allows you to show your projects in the outdoor without the PC.
- This board is ideal for learners want to learn for it and make creative projects.
- On-board test indicator LED, and you can program to control it.
- USB interface driver chip: CH340G, compatible with win7, win8, linux, MAC OS.
- Microcontroller: Atmel ATmega168P
- Working voltage: 5V or 3.3V.
- IO logic voltage: 5V or 3.3V
- Working current: 500mA (Max)
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Flash Memory: 16KB of which 2 KB used by bootloader
- SRAM: 2KB
- EEPROM: 1KB
- Clock Speed: 16 MHz
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Board
1 x USB cable(30cm)
               
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)

Write your review

Hasonló kategóriák mint 16 :