- -40%
3,3 V 2,0 hüvelykes 8 bites párhuzamos TFT LCD modul 176x220 LCD Shield Breakout Board SMD tűkkel, Arduino kompatibilis
3,3 V 2,0 hüvelykes 8 bites párhuzamos TFT LCD modul 176x220 LCD Shield Breakout Board SMD tűkkel, Arduino kompatibilis
687 Ft
40% megtakarítás
1 145 Ft
Nincs adó
Description
This is a 2.0 inch TFT LCD expansion board with 8-bit parallel interface. This display has a controller built into it with RAM buffering, so that almost no work is done by the micro controller. It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy.
It leads out PAD pins so that you can solder pin headers to plug it onto the breadboard or use dupont cable to connect it for Arduino.
It also lead out SMD pins (half-hole process) so that you can solder it onto the experiment PCB board or your own designed board. That is great to design wonderful projects.
With RTC module, you can design your clock.
With NFC reader module, you can create access control systems with the photos show.
- Can use it directly to display characters, graphics and BMP format images with the help of Micro SD card adapter module.
- Compatibility: Because the logic level is 3.3V, it is compatible for Arduino.
And you can connect to it OPEN-SMART Board Black version with 5V/3.3V power switch. You need to add a level conversion circuit for Board 5V. You can also connect it to other 3.3V MCU directly.
- Resolution: 176 x 220, 16-bit (262,000) color
- Display size: 2.0 inch;
- Operating voltage: 3.3V;
- Logic level: 3.3V;
- Operating current: the maximum is 50mA
- Bus interface: 8080-parallel interface (8 bit)
- IO Port Package: Both SMD and PAD are available, and the pin pitch is 2.54mm.
- LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day.
- Great for DIY
Photos
Part List (Schematics and program can be sent,Please contact us)
1 x Board
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
This is a 2.0 inch TFT LCD expansion board with 8-bit parallel interface. This display has a controller built into it with RAM buffering, so that almost no work is done by the micro controller. It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy.
It leads out PAD pins so that you can solder pin headers to plug it onto the breadboard or use dupont cable to connect it for Arduino.
It also lead out SMD pins (half-hole process) so that you can solder it onto the experiment PCB board or your own designed board. That is great to design wonderful projects.
With RTC module, you can design your clock.
With NFC reader module, you can create access control systems with the photos show.
- Can use it directly to display characters, graphics and BMP format images with the help of Micro SD card adapter module.
- Compatibility: Because the logic level is 3.3V, it is compatible for Arduino.
And you can connect to it OPEN-SMART Board Black version with 5V/3.3V power switch. You need to add a level conversion circuit for Board 5V. You can also connect it to other 3.3V MCU directly.
- Resolution: 176 x 220, 16-bit (262,000) color
- Display size: 2.0 inch;
- Operating voltage: 3.3V;
- Logic level: 3.3V;
- Operating current: the maximum is 50mA
- Bus interface: 8080-parallel interface (8 bit)
- IO Port Package: Both SMD and PAD are available, and the pin pitch is 2.54mm.
- LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day.
- Great for DIY
Photos
Part List (Schematics and program can be sent,Please contact us)
1 x Board
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
