- -40%
SMD 3-9V – 9V 0,6A Step-up Boost Converter tápegység modul Power Step-up szabályozó modul kiváló barkácsprojektekhez
547 Ft
40% megtakarítás
912 Ft
Nincs adó
Description
This is a mini DC-DC step-up power module and it output fixed 9V. Using a low temperature drift 0.1% accuracy of the precision resistor, even if the board temperature rise a lot, resistance of the resistor changes less, so it does not affect the output voltage.
The greater the input voltage, the greater the ability to output current.
Can be directly soldered on the surface of experiment PCB board, easy to solder for everyone.
It is especially for smart car, phone charger, portable charger and other items.
Features:
- Module type: Non-isolated step-up module (boost);
- Pins package: Both SMD and 2.54mm pin headers are available;
- Input voltage: 3V-9VDC
- Output voltage: 9VDC ± 2%
- No-load current: less than 500uA
- Output current: 1A(MAX) @input voltage is 5V
- Continuous Current: 0.5A(MAX) @input voltage is 5V
- Conversion efficiency: 90% (MAX)
- Switching frequency: 1.2MHz Typical
- On-board high-capacity X7R capacitors that can enhance the stability.
- Great for DIY projects
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
This is a mini DC-DC step-up power module and it output fixed 9V. Using a low temperature drift 0.1% accuracy of the precision resistor, even if the board temperature rise a lot, resistance of the resistor changes less, so it does not affect the output voltage.
The greater the input voltage, the greater the ability to output current.
Can be directly soldered on the surface of experiment PCB board, easy to solder for everyone.
It is especially for smart car, phone charger, portable charger and other items.
Features:
- Module type: Non-isolated step-up module (boost);
- Pins package: Both SMD and 2.54mm pin headers are available;
- Input voltage: 3V-9VDC
- Output voltage: 9VDC ± 2%
- No-load current: less than 500uA
- Output current: 1A(MAX) @input voltage is 5V
- Continuous Current: 0.5A(MAX) @input voltage is 5V
- Conversion efficiency: 90% (MAX)
- Switching frequency: 1.2MHz Typical
- On-board high-capacity X7R capacitors that can enhance the stability.
- Great for DIY projects
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
SMD 3-9V – 9V 0,6A Step-up Boost Converter tápegység modul Power Step-up szabályozó modul kiváló barkácsprojektekhez
SMD 3-9V to 9V 0.6A Step-up Boost Converter Power Supply Module Power Step-up Regulator Module Great for DIY projects
Description
This is a mini DC-DC step-up power module and it output fixed 9V. Using a low temperature drift 0.1% accuracy of the precision resistor, even if the board temperature rise a lot, resistance of the resistor changes less, so it does not affect the output voltage.
The greater the input voltage, the greater the ability to output current.
Can be directly soldered on the surface of experiment PCB board, easy to solder for everyone.
It is especially for smart car, phone charger, portable charger and other items.
Features:
- Module type: Non-isolated step-up module (boost);
- Pins package: Both SMD and 2.54mm pin headers are available;
- Input voltage: 3V-9VDC
- Output voltage: 9VDC ± 2%
- No-load current: less than 500uA
- Output current: 1A(MAX) @input voltage is 5V
- Continuous Current: 0.5A(MAX) @input voltage is 5V
- Conversion efficiency: 90% (MAX)
- Switching frequency: 1.2MHz Typical
- On-board high-capacity X7R capacitors that can enhance the stability.
- Great for DIY projects
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
32831147083 - opensmart
SMD 3-9V to 9V 0.6A Step-up Boost Converter Power Supply Module Power Step-up Regulator Module Great for DIY projects
Description
This is a mini DC-DC step-up power module and it output fixed 9V. Using a low temperature drift 0.1% accuracy of the precision resistor, even if the board temperature rise a lot, resistance of the resistor changes less, so it does not affect the output voltage.
The greater the input voltage, the greater the ability to output current.
Can be directly soldered on the surface of experiment PCB board, easy to solder for everyone.
It is especially for smart car, phone charger, portable charger and other items.
Features:
- Module type: Non-isolated step-up module (boost);
- Pins package: Both SMD and 2.54mm pin headers are available;
- Input voltage: 3V-9VDC
- Output voltage: 9VDC ± 2%
- No-load current: less than 500uA
- Output current: 1A(MAX) @input voltage is 5V
- Continuous Current: 0.5A(MAX) @input voltage is 5V
- Conversion efficiency: 90% (MAX)
- Switching frequency: 1.2MHz Typical
- On-board high-capacity X7R capacitors that can enhance the stability.
- Great for DIY projects
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
32831147083 - opensmart
32831147083
Hasonló kategóriák mint 16 :
-
-
8 tűs 4x4 4 * 4 mátrix 16 gombos billentyűzet billentyűzet Breadboard modul MCU arduino barkácskészlethezÁr 134 Ft -40% Szabályos ár 224 Ft
-
ESP8266 WIFI fejlesztői alaplap bővítőkártya, amely kompatibilis a NodeMcu Lua V3 hátlappalÁr 202 Ft -40% Szabályos ár 337 Ft
-
YHDC PE4825-I teljesítmény 15VA bemenet 220V kimenet 6V tokozott transzformátor PCB hegesztési leválasztásÁr 1 561 Ft -40% Szabályos ár 2 602 Ft
-
Szín: vas MG996 360 - SG90S MG90s MG996R MG995 S3003 9g/14g/55g szervo hajtómű JR autós RC modell helikopterhezÁr 397 Ft -40% Szabályos ár 662 Ft
-
PTC10 Audio használathoz Tápfeszültség 10VA 2*115V 2*7V toroid transzformátor, tokozott transzformátor PCB HegesztőÁr 1 956 Ft -40% Szabályos ár 3 260 Ft
-
GY-346 ADXL346 érzékelőmodul alternatív ADXL345 modul I2C SPI IIC interfészÁr 190 Ft -40% Szabályos ár 316 Ft
-
K10 TWS Bluetooth fülhallgató minden okostelefonhoz Sport fejhallgató sztereó fülhallgató vezeték nélküli BluetoothÁr 1 496 Ft -40% Szabályos ár 2 493 Ft
-
2 DB 12VDC 1CH DPDT relé kapcsoló modul Arduino UNO MEGA2560 DUE raspberry pi PIC 8051 AVR-hezÁr 443 Ft -40% Szabályos ár 738 Ft
-
NE555 állítható frekvenciájú impulzusgenerátor modul Arduino Smart Car számáraÁr 133 Ft -40% Szabályos ár 221 Ft
-
YHDC OE5424 Vízálló transzformátor Teljesítmény 20VA bemeneti feszültség 220V Kimeneti feszültség 7,5VÁr 2 872 Ft -40% Szabályos ár 4 787 Ft
-
PT2262 adó vezérlő késleltetés relé vevő készletek RF vezeték nélküli lámpa LED motorÁr 2 242 Ft -40% Szabályos ár 3 737 Ft
-
DC 12V elektromos mágnesszelep zárnyelv felfelé tartó szerelvény az ajtószekrény fiókjáhozÁr 456 Ft -40% Szabályos ár 760 Ft
-
1db HL-340 Új USB - RS232 COM port Soros PDA 9 tűs DB9 adapter támogatás Windows7-64Ár 126 Ft -40% Szabályos ár 210 Ft
-
Szín: kék - 5 db akkumulátor tároló állványtartó tok Makita 18V-os rögzítőeszközökhözÁr 965 Ft -40% Szabályos ár 1 609 Ft
-
PE6637K-M 60VA 220V/12V tokozott transzformátor NYÁK-ra szerelhető transzformátorÁr 2 972 Ft -40% Szabályos ár 4 954 Ft
Description
This is a mini DC-DC step-up power module and it output fixed 9V. Using a low temperature drift 0.1% accuracy of the precision resistor, even if the board temperature rise a lot, resistance of the resistor changes less, so it does not affect the output voltage.
The greater the input voltage, the greater the ability to output current.
Can be directly soldered on the surface of experiment PCB board, easy to solder for everyone.
It is especially for smart car, phone charger, portable charger and other items.
Features:
- Module type: Non-isolated step-up module (boost);
- Pins package: Both SMD and 2.54mm pin headers are available;
- Input voltage: 3V-9VDC
- Output voltage: 9VDC ± 2%
- No-load current: less than 500uA
- Output current: 1A(MAX) @input voltage is 5V
- Continuous Current: 0.5A(MAX) @input voltage is 5V
- Conversion efficiency: 90% (MAX)
- Switching frequency: 1.2MHz Typical
- On-board high-capacity X7R capacitors that can enhance the stability.
- Great for DIY projects
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
This is a mini DC-DC step-up power module and it output fixed 9V. Using a low temperature drift 0.1% accuracy of the precision resistor, even if the board temperature rise a lot, resistance of the resistor changes less, so it does not affect the output voltage.
The greater the input voltage, the greater the ability to output current.
Can be directly soldered on the surface of experiment PCB board, easy to solder for everyone.
It is especially for smart car, phone charger, portable charger and other items.
Features:
- Module type: Non-isolated step-up module (boost);
- Pins package: Both SMD and 2.54mm pin headers are available;
- Input voltage: 3V-9VDC
- Output voltage: 9VDC ± 2%
- No-load current: less than 500uA
- Output current: 1A(MAX) @input voltage is 5V
- Continuous Current: 0.5A(MAX) @input voltage is 5V
- Conversion efficiency: 90% (MAX)
- Switching frequency: 1.2MHz Typical
- On-board high-capacity X7R capacitors that can enhance the stability.
- Great for DIY projects
Photos
Part List (Schematics and program can be sent via e-mail,Please contact us)
1 x Module
Please Note That (Note: After you buy the product, the documents can be send, Please contact us)
