- -41%
Szín: 10 DB - 10db WiFi Bluetooth modul ESP32 soros port és WiFi kettős antenna ESP32-S modul
Szín: 10 DB - 10db WiFi Bluetooth modul ESP32 soros port és WiFi kettős antenna ESP32-S modul
2 438 Ft
41% megtakarítás
4 133 Ft
Nincs adó
Description
●ESP32-S is an ultra-small multi-function radio frequency group. The dual-core
ESP32 is used as the main control, and the module is equipped with PCB
on-board antenna and IPEX base antenna, which can be used according to the
needs of the scene.
●It uses ESP32 to integrate WiFi, traditional Bluetooth and Bluetooth Low Energy
(BLE Beacon),with two high-performance 32-bit LX6CPUs, a 7-stage pipeline
architecture, and a main frequency range of 80MHz to 240MH. On-chip sensors:
Hall sensors, temperature sensors, capacitive touch sensors.
●It is fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards. It
can be used as a master mode to build an independent network controller, or it
can be used as a slave to run on other host MCUs, adding networking functions
to existing devices.
●The module integrates a PCB on-board antenna and a U.FL socket selected by
a 0Ω resistor, and the on-board PCB antenna is used by default.
Parameter
Module modelv
ESP32-S
Encapsulation
SMD-38
Size
18.0*25.8*2.8（±0.2）mm
SPI Flash
Default 32Mbit
Bluetooth
Bluetooth 4.2 BR/EDR and BLE
WiFi
802.11b/g/n/e/i
Support interface
UART/SPI/SDIO/I2C/PWM/I2S/IR/ADC/DAC
IO port
22
On-chip sensor
Hall sensor\temperature sensor\capacitive touch sensor
Serial port rate
Default 115200bps
Spectrum range
2412~2484MHz
Antenna
Onboard PCB antenna and IPEX antenna base
Transmitting power
802.11b: 17±2 dBm(@11Mbps)
802.11g: 14±2 dBm(@54Mbps)
802.11n: 13±2 dBm(@HT20,MCS7)
Receiving sensitivity
CCK,1Mbps:-90dBm
CCK,11Mbps:-85dBm
6Mbps(1/2 BPSK):-88dBm
54 Mbps(3/4 64-QAM):-70dBm
MCS7(65Mbps,72.2Mbps):-67dBm
Power consumption
300mA@3.3V
Safety
WEP/WPA2/WPA2-Enterprise/WPS
Power supply range
3.0V~3.6V,
Operating temperature
-20℃~ 85℃
Storage environment
-40℃~ 90℃，<90％RH
Weight
1.5g
●ESP32-S is an ultra-small multi-function radio frequency group. The dual-core
ESP32 is used as the main control, and the module is equipped with PCB
on-board antenna and IPEX base antenna, which can be used according to the
needs of the scene.
●It uses ESP32 to integrate WiFi, traditional Bluetooth and Bluetooth Low Energy
(BLE Beacon),with two high-performance 32-bit LX6CPUs, a 7-stage pipeline
architecture, and a main frequency range of 80MHz to 240MH. On-chip sensors:
Hall sensors, temperature sensors, capacitive touch sensors.
●It is fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards. It
can be used as a master mode to build an independent network controller, or it
can be used as a slave to run on other host MCUs, adding networking functions
to existing devices.
●The module integrates a PCB on-board antenna and a U.FL socket selected by
a 0Ω resistor, and the on-board PCB antenna is used by default.
Parameter
Module modelv
ESP32-S
Encapsulation
SMD-38
Size
18.0*25.8*2.8（±0.2）mm
SPI Flash
Default 32Mbit
Bluetooth
Bluetooth 4.2 BR/EDR and BLE
WiFi
802.11b/g/n/e/i
Support interface
UART/SPI/SDIO/I2C/PWM/I2S/IR/ADC/DAC
IO port
22
On-chip sensor
Hall sensor\temperature sensor\capacitive touch sensor
Serial port rate
Default 115200bps
Spectrum range
2412~2484MHz
Antenna
Onboard PCB antenna and IPEX antenna base
Transmitting power
802.11b: 17±2 dBm(@11Mbps)
802.11g: 14±2 dBm(@54Mbps)
802.11n: 13±2 dBm(@HT20,MCS7)
Receiving sensitivity
CCK,1Mbps:-90dBm
CCK,11Mbps:-85dBm
6Mbps(1/2 BPSK):-88dBm
54 Mbps(3/4 64-QAM):-70dBm
MCS7(65Mbps,72.2Mbps):-67dBm
Power consumption
300mA@3.3V
Safety
WEP/WPA2/WPA2-Enterprise/WPS
Power supply range
3.0V~3.6V,
Operating temperature
-20℃~ 85℃
Storage environment
-40℃~ 90℃，<90％RH
Weight
1.5g
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
