- -40%
Kéttengelyes XY gomb joystick PS2 játék joystick joystick érzékelő modul JoyStick elektronikus építőelem Arduinohoz
Kéttengelyes XY gomb joystick PS2 játék joystick joystick érzékelő modul JoyStick elektronikus építőelem Arduinohoz
124 Ft
40% megtakarítás
207 Ft
Nincs adó
Arduino dual axis button rocker PS2 game rocker joystick JoyStick electronic building blocks
Product introduction:
The dual-axis key rocker sensor module is made of PS2 rocker potentiometer, with (X, Y) 2-axis analog output and (Z) 1 button digital output. Cooperate with Arduino sensor expansion board to make interactive works such as remote control. In addition, in order to make this product more convenient for customers to cooperate with standard interfaces such as arduino expansion boards, the X, Y, and Z axis circuits are all led out separately in the design, and users can use the 3-pin ARDUINO dedicated line to plug into the expansion board. To use.
Product performance:
1. Input voltage range: DC 3.3V to 5V
2. Output signal: The module is equipped with two analog output and one digital output interface, the output value corresponds to the (X, Y) dual axis offset, the type is analog; the button indicates whether the user presses on the Z axis, Its type is digital switch quantity.
3. It can be programmed through the Arduino controller, and the sensor expansion board can be plugged in to complete creative remote control interactive works.
4. The cross rocker is a two-way 10K resistor. With the direction of the rocker, the resistance of the tap changes. This module uses 5V power supply. In the original state, the X and Y readout voltages are about 2.5V. When pressed in the direction of the arrow, the readout voltage value increases, up to 5V; when the arrow is pressed in the opposite direction, the readout voltage value decreases. , The minimum is 0V.
Product parameters:
Product name: Joystick module (two-axis key rocker)
Product size: 34.0mm * 26.0mm* 32.0mm (length x width x height)
Color: Black Product weight: 11.0g (including packaging)
Packaging: Single module electrostatic bag packaging
Material: FR4 electronic components
Product introduction:
The dual-axis key rocker sensor module is made of PS2 rocker potentiometer, with (X, Y) 2-axis analog output and (Z) 1 button digital output. Cooperate with Arduino sensor expansion board to make interactive works such as remote control. In addition, in order to make this product more convenient for customers to cooperate with standard interfaces such as arduino expansion boards, the X, Y, and Z axis circuits are all led out separately in the design, and users can use the 3-pin ARDUINO dedicated line to plug into the expansion board. To use.
Product performance:
1. Input voltage range: DC 3.3V to 5V
2. Output signal: The module is equipped with two analog output and one digital output interface, the output value corresponds to the (X, Y) dual axis offset, the type is analog; the button indicates whether the user presses on the Z axis, Its type is digital switch quantity.
3. It can be programmed through the Arduino controller, and the sensor expansion board can be plugged in to complete creative remote control interactive works.
4. The cross rocker is a two-way 10K resistor. With the direction of the rocker, the resistance of the tap changes. This module uses 5V power supply. In the original state, the X and Y readout voltages are about 2.5V. When pressed in the direction of the arrow, the readout voltage value increases, up to 5V; when the arrow is pressed in the opposite direction, the readout voltage value decreases. , The minimum is 0V.
Product parameters:
Product name: Joystick module (two-axis key rocker)
Product size: 34.0mm * 26.0mm* 32.0mm (length x width x height)
Color: Black Product weight: 11.0g (including packaging)
Packaging: Single module electrostatic bag packaging
Material: FR4 electronic components
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
