- -41%
Szín: ESP-01S - ESP-01 Frissített verzió ESP-01S ESP8266 soros WIFI-modell Eredetiség Garantált Internetes Wifi
188 Ft
41% megtakarítás
318 Ft
Nincs adó
PRODUCT DETAILS
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
ESP-01 Frissített verzió ESP-01S ESP8266 soros WIFI-modell Eredetiség Garantált Internetes Wifi-modellkártya Arduino-hoz
ESP-01 Upgraded version ESP-01S ESP8266 serial WIFI model Authenticity Guaranteed Internet of thing Wifi Model Board For Arduino
PRODUCT DETAILS
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
1005003406957470/2 - fullstar
ESP-01 Frissített verzió ESP-01S ESP8266 soros WIFI-modell Eredetiség Garantált Internetes Wifi-modellkártya Arduino-hoz
ESP-01 Upgraded version ESP-01S ESP8266 serial WIFI model Authenticity Guaranteed Internet of thing Wifi Model Board For Arduino
PRODUCT DETAILS
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
1005003406957470/2 - fullstar
1005003406957470/2
Hasonló kategóriák mint 16 :
-
-
Tablet PC hűtőborda nagy teljesítményű hűtőventilátor félvezető hűtés 10 hüvelykes iPad táblaszámítógépÁr 4 787 Ft -41% Szabályos ár 8 113 Ft
-
Fekete szín - 6 csomag PS4 vezérlőhöz, falra szerelhető fejhallgató-állvány Fejhallgató tartó kampós állványÁr 1 571 Ft -41% Szabályos ár 2 662 Ft
-
3D nyomtató A4988 DRV8825 léptetőmotor-illesztőprogram vezérlőpult kártya bővítő kártyaÁr 146 Ft -41% Szabályos ár 247 Ft
-
5 DB 5W DC 5V–DC 12V Engedélyezze az IO-vezérlő kapcsolót, fokozatos átalakító tápegységÁr 1 377 Ft -41% Szabályos ár 2 334 Ft
-
MAX31865 PT100 – PT1000 RTD-digitális átalakító kártya hőmérséklet hőelem érzékelő erősítő modul 3.3V/5VÁr 1 325 Ft -41% Szabályos ár 2 246 Ft
-
Fekete szín - 5M USB Type C kábel Quest 1 2 Link kompatibilis VR adatátviteli gyorstöltés USB 3.2 Type-C USB C adapterhezÁr 1 336 Ft -41% Szabályos ár 2 264 Ft
-
RA-02 modul - SX1278 LoRa Module 433M 10KM Ra-02 vezeték nélküli modul Ai-Thinker szórt spektrumú átviteli elektronikusÁr 358 Ft -41% Szabályos ár 607 Ft
-
Szín: USBHUB alaplap - USBHUB USB2.0 hub USB bővítőmodul 1 pontos 4/1 drag 4/HUB modul GL850G modulÁr 346 Ft -41% Szabályos ár 587 Ft
-
100 DB 5050 LED fehér LED nagy fényerejű Diodo Azul Luz 6500K SMD fénykibocsátó diódák SMD 5050 fehér fénydióda 18lmÁr 171 Ft -41% Szabályos ár 289 Ft
-
SIM800L - Új SIM800L GPRS GSM modul PCB antenna SIM-kártyával, négysávos MCU-hoz Arduino-hozÁr 343 Ft -41% Szabályos ár 581 Ft
-
3 gombos nagy teljesítményű EV1527 Fix kódú távirányító 433.92MHzÁr 712 Ft -41% Szabályos ár 1 206 Ft
-
Fekete szín - USB C-3,5 mm-es fejhallgató adapter 90 fokos C típusú hordozható fejhallgató-erősítő DAC iPad Pro HuaweiÁr 334 Ft -41% Szabályos ár 566 Ft
-
60 DB/LOT 8 tűs DIP IC aljzatok Adapter Forrasztás típusa 8 tűs. Vásároljon jó termékeket, válasszon minketÁr 258 Ft -41% Szabályos ár 438 Ft
-
20db Reflection IR akadálykerülés modul érzékelő infravörös érzékelő az Aduino intelligens autórobothozÁr 666 Ft -41% Szabályos ár 1 128 Ft
-
Szín: Khaki - Audio UHF vezeték nélküli Lavalier mikrofon 30 választható csatornával DSLR fényképezőgépes interjúÁr 3 746 Ft -41% Szabályos ár 6 349 Ft
PRODUCT DETAILS
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
