- -43%
Szín: USB TO ESP8266-hoz - ESP-01 Frissített verzió ESP-01S ESP8266 soros WIFI-modell Eredetiség Garantált Internetes Wifi
Szín: USB TO ESP8266-hoz - ESP-01 Frissített verzió ESP-01S ESP8266 soros WIFI-modell Eredetiség Garantált Internetes Wifi
151 Ft
43% megtakarítás
265 Ft
Nincs adó
PRODUCT DETAILS
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
Application scenarios
Industrial manufacturing
Short distance replacement of signal cable in industrial site reduces wiring, facilitates management and improves production efficiency.
Smart home
Physical layer technology solution of home Internet of things, diffraction performance, teaching children, villa level coverage.
Smart farm
Accurate monitoring of the details of each operation area, convenient for statistical management, the first time to identify potential risks.
Hotel solutions
Support a large number of access points, facilitate the unified management of the background, reduce the inspection manpower, and improve the supervision efficiency.
Features
Based on the development of esp8266 chip, the module integrates the transmission function, supports the serial instruction set, and users can access the network through the serial port. It is widely used in smart wear, smart home security, remote control, automotive electronics, intelligent lighting, industrial Internet of things and other fields.
Product parameters
Model
ESP-01/ESP-01S
Describe
Packaging form
DIP-8
Direct insertion
Module Size
24.9*14.6*11mm
±0.2mm
SPI FLASH
8Mbit
Default
Support interface
/
UART/GPIO
Available IO port
2
Series Rate
4608000bps
Support300~4608000bps,
default115200bps
Spectrum range
2.4GHz
2412~2484MHz
Antenna form
On board
PCB antenna,gain 2dBI
Transmitting power
/
802.11b:16±2dBm;
802.11g:16±2dBm;
802. 11n:16±2dBm
Security
/
WEP/WPA-PSK/WPA2-PSK
Scope of power supply
3.3V
3.0~3.6V,current>500MA
Working temperature
Industrial grade
-20℃~ 85℃
At support
Built in intelligent processing
Itcan be read by at command
USB to ESP8266
PRODUCT DETAIS
DESCRIPTION
This moduel is an USB adpater / programmer for ESP8266 moduels of type ESP-01. It is conveniently fitted with a 2x4P. 2.54mm female header to plug the ESP01 (according to illustration picture 2) and configure or run it right away. A large 1000μF cap will help getting a steady 5.0V VCC from the USB bus and and jumper (on the right of the 2X4F header) (we dont't offer any jumper!!!!)
Will help configuring the GPI00 line according needs. The module is based on the USB-UART bridget CH340 from WCH which is compatible with all platforms.
NOTE
For an usage with A-rduino ESP8266 platform and for Arduino IDE. it is necessary to switch manually the GPIO0 state for working mode, in order to get a fully automatic upload it is most likely possible, for a very limited effort, to assign an unused control line from CH340 t driver the GPIO0 line (probably at the cost of a necessary logic inversion), refer to the CH340 datasheet and most important to the NodeMCU V0.9 which use the CH340 and alreadv implements this solution, the schematic is open source and easily avallable.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
