• -40%

Szín: GY-56L VL53L0X plus - 1 DB GY-56 VL53L0X VL53L1X Repülési idő (ToF) Infravörös lézer hatótávolság-érzékelő

Szín: GY-56L VL53L0X plus - 1 DB GY-56 VL53L0X VL53L1X Repülési idő (ToF) Infravörös lézer hatótávolság-érzékelő

1 194 Ft 40% megtakarítás
1 990 Ft
Nincs adó
GY-56 infrared laser ranging module serial port or IIC communication, with distance setting switch output high and low level.
Optical cover sheet description: The optical cover sheet supporting VL53L0X VL53L1X can be used to measure more accurately, and at the same time it can protect the sensor and prolong the service life of the sensor. Customers can choose and match by themselves.
Overview
GY-56 is a low-cost digital infrared ranging sensor module. The working voltage is 3-5v, the power consumption is small, the volume is small, and the installation is convenient. Its working principle is that the infrared LED emits light, after illuminating the object under test, the return light is received by the MCU, and the MCU calculates the time difference to obtain the distance. Output the distance value directly.
This module has two ways to read data, namely serial port UART (TTL level) IIC (2-wire) mode. The baud rate of the serial port is 9600bps and 115200bps, configurable, continuous, and query output. Save the settings after power-off. Provide Arduino, 51, stm32 single-chip communication program, do not provide the schematic diagram and internal single-chip source code.
GY-56 can set the upper and lower limit distance alarm value, switch output, and directly output high level when the object is blocked in the set interval. In IIC mode, if necessary, you can set the internal IIC address to be different, so that multiple sensors are directly connected to the same bus.
Features
(1) High-cost performance
(2) Built-in MCU to calculate distance
(3), IIC, serial communication format
(4) Equipped with corresponding upper computer software
Application
(1) Intelligent robot
(2) Teaching laboratory equipment
(3) Product inspection of the production line
(4) Infrared ranging
Technical Parameters
Name

Parameter
Measuring range

0-2 meters (dark light, long-distance mode)
Response frequency

22ms (fast measurement mode)
Working voltage

3~5V
Working current

15~35mA
Working temperature

-20℃ ~  85℃
Storage temperature

-40℃~  125℃
Storage temperature

25mm*15.6mm
Sensor chip

VL53L0X
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
1 DB GY-56 VL53L0X VL53L1X Repülési idő (ToF) Infravörös lézer hatótávolság-érzékelő modul kommunikációs I2C IIC GY 56
1PCS GY-56 VL53L0X VL53L1X Time-of-Flight (ToF) Infrared Laser Ranging Sensor Module Communication I2C IIC GY 56
GY-56 infrared laser ranging module serial port or IIC communication, with distance setting switch output high and low level.
Optical cover sheet description: The optical cover sheet supporting VL53L0X VL53L1X can be used to measure more accurately, and at the same time it can protect the sensor and prolong the service life of the sensor. Customers can choose and match by themselves.
Overview
GY-56 is a low-cost digital infrared ranging sensor module. The working voltage is 3-5v, the power consumption is small, the volume is small, and the installation is convenient. Its working principle is that the infrared LED emits light, after illuminating the object under test, the return light is received by the MCU, and the MCU calculates the time difference to obtain the distance. Output the distance value directly.
This module has two ways to read data, namely serial port UART (TTL level) IIC (2-wire) mode. The baud rate of the serial port is 9600bps and 115200bps, configurable, continuous, and query output. Save the settings after power-off. Provide Arduino, 51, stm32 single-chip communication program, do not provide the schematic diagram and internal single-chip source code.
GY-56 can set the upper and lower limit distance alarm value, switch output, and directly output high level when the object is blocked in the set interval. In IIC mode, if necessary, you can set the internal IIC address to be different, so that multiple sensors are directly connected to the same bus.
Features
(1) High-cost performance
(2) Built-in MCU to calculate distance
(3), IIC, serial communication format
(4) Equipped with corresponding upper computer software
Application
(1) Intelligent robot
(2) Teaching laboratory equipment
(3) Product inspection of the production line
(4) Infrared ranging
Technical Parameters
Name

Parameter
Measuring range

0-2 meters (dark light, long-distance mode)
Response frequency

22ms (fast measurement mode)
Working voltage

3~5V
Working current

15~35mA
Working temperature

-20℃ ~  85℃
Storage temperature

-40℃~  125℃
Storage temperature

25mm*15.6mm
Sensor chip

VL53L0X
1005003490123642/2 - fullstar
1005003490123642/2

Hasonló kategóriák mint 16 :

Reviews

Write your review

Szín: GY-56L VL53L0X plus - 1 DB GY-56 VL53L0X VL53L1X Repülési idő (ToF) Infravörös lézer hatótávolság-érzékelő

GY-56 infrared laser ranging module serial port or IIC communication, with distance setting switch output high and low level.
Optical cover sheet description: The optical cover sheet supporting VL53L0X VL53L1X can be used to measure more accurately, and at the same time it can protect the sensor and prolong the service life of the sensor. Customers can choose and match by themselves.
Overview
GY-56 is a low-cost digital infrared ranging sensor module. The working voltage is 3-5v, the power consumption is small, the volume is small, and the installation is convenient. Its working principle is that the infrared LED emits light, after illuminating the object under test, the return light is received by the MCU, and the MCU calculates the time difference to obtain the distance. Output the distance value directly.
This module has two ways to read data, namely serial port UART (TTL level) IIC (2-wire) mode. The baud rate of the serial port is 9600bps and 115200bps, configurable, continuous, and query output. Save the settings after power-off. Provide Arduino, 51, stm32 single-chip communication program, do not provide the schematic diagram and internal single-chip source code.
GY-56 can set the upper and lower limit distance alarm value, switch output, and directly output high level when the object is blocked in the set interval. In IIC mode, if necessary, you can set the internal IIC address to be different, so that multiple sensors are directly connected to the same bus.
Features
(1) High-cost performance
(2) Built-in MCU to calculate distance
(3), IIC, serial communication format
(4) Equipped with corresponding upper computer software
Application
(1) Intelligent robot
(2) Teaching laboratory equipment
(3) Product inspection of the production line
(4) Infrared ranging
Technical Parameters
Name

Parameter
Measuring range

0-2 meters (dark light, long-distance mode)
Response frequency

22ms (fast measurement mode)
Working voltage

3~5V
Working current

15~35mA
Working temperature

-20℃ ~  85℃
Storage temperature

-40℃~  125℃
Storage temperature

25mm*15.6mm
Sensor chip

VL53L0X

Write your review