- -25%
Szín: Réz oszloppal - DC-DC 150W boost modul autós laptop mobil tápegység 10-32V-tól 12-35V-ig állítható
Szín: Réz oszloppal - DC-DC 150W boost modul autós laptop mobil tápegység 10-32V-tól 12-35V-ig állítható
371 Ft
25% megtakarítás
494 Ft
Nincs adó
Module parameters
Module nature: non-isolated boost module
Input mode: IN input positive, IN- input negative
Output mode: OUT output positive, OUT- output negative
Wiring mode: welding-free, terminal
Input voltage: 10-32V
Output voltage: (1) Continuously adjustable (12~35V)
(2) Fixed output (any choice between 12~35V)
Output current: 6A (MAX)
Input current: 10A (MAX) (please increase heat dissipation if it exceeds 10A)
Output power: natural cooling 100W (MAX), plus fan 150W (MAX)
Easily drive 65W 90W laptop including dual core
Use a 12V battery with an ordinary 19V 3.42A notebook computer The temperature of the module is about 45 degrees
Conversion efficiency: 94% (measured at 16V input and 19V 2.5A output) (for reference only)
Working temperature: industrial grade (-40°C to 85°C) (the ambient temperature exceeds 40°C, please reduce the power to use, or add a fan)
Full load temperature rise: 45℃
No-load current: 25mA typical
Short-circuit protection: No, please install an over-current protector at the input
Input reverse connection protection: None, please connect a diode in series with the input
Module weight: 68g
Module size: length 65.4mm* height 24.5mm* (width 56.5mm including heat sink)
Scope of application
1).DIY an output adjustable car power supply, you only need to connect your 12V power supply at the input, you can adjust the output voltage (14-35V) freely and continuously, but the output voltage cannot be lower than the input voltage.
2). Universal car laptop power supply. The input is connected to your 12V power supply, and the output is adjusted to the voltage of your notebook to work.
3). To supply power to your electronic equipment, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current, it can work normally.
4). The system front-end power supply, when you are working on a project when the input is 10-18V, and your system board needs a power supply of about 24V and its power is very large, the power of ordinary DC-DC modules is too large. Small, can work directly on the machine without debugging, easily achieve high-efficiency and high-power boost.
Module nature: non-isolated boost module
Input mode: IN input positive, IN- input negative
Output mode: OUT output positive, OUT- output negative
Wiring mode: welding-free, terminal
Input voltage: 10-32V
Output voltage: (1) Continuously adjustable (12~35V)
(2) Fixed output (any choice between 12~35V)
Output current: 6A (MAX)
Input current: 10A (MAX) (please increase heat dissipation if it exceeds 10A)
Output power: natural cooling 100W (MAX), plus fan 150W (MAX)
Easily drive 65W 90W laptop including dual core
Use a 12V battery with an ordinary 19V 3.42A notebook computer The temperature of the module is about 45 degrees
Conversion efficiency: 94% (measured at 16V input and 19V 2.5A output) (for reference only)
Working temperature: industrial grade (-40°C to 85°C) (the ambient temperature exceeds 40°C, please reduce the power to use, or add a fan)
Full load temperature rise: 45℃
No-load current: 25mA typical
Short-circuit protection: No, please install an over-current protector at the input
Input reverse connection protection: None, please connect a diode in series with the input
Module weight: 68g
Module size: length 65.4mm* height 24.5mm* (width 56.5mm including heat sink)
Scope of application
1).DIY an output adjustable car power supply, you only need to connect your 12V power supply at the input, you can adjust the output voltage (14-35V) freely and continuously, but the output voltage cannot be lower than the input voltage.
2). Universal car laptop power supply. The input is connected to your 12V power supply, and the output is adjusted to the voltage of your notebook to work.
3). To supply power to your electronic equipment, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current, it can work normally.
4). The system front-end power supply, when you are working on a project when the input is 10-18V, and your system board needs a power supply of about 24V and its power is very large, the power of ordinary DC-DC modules is too large. Small, can work directly on the machine without debugging, easily achieve high-efficiency and high-power boost.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
