RFID modul RC522 mini Kits S50 13,56 Mhz 6cm címkékkel SPI Write & Read for arduino uno 2560
199 Ft41% megtakarítás
337 Ft
Nincs adó
[Introduction to RC522 chip] MF RC522 is a highly integrated card reader/writer chip used in 13.56MHz contactless communication. It is a low-voltage, low-cost, and small non-contact card reader/writer chip for the "three-meter" application. It is a smart meter And a better choice for the development of portable handheld devices. MF RC522 utilizes advanced modulation and demodulation concepts and fully integrates all types of passive non-contact communication methods and protocols under 13.56MHz. Support 14443A compatible transponder signal. The digital part handles ISO14443A frames and error detection. In addition, it also supports the fast CRYPTO1 encryption algorithm to verify the MIFARE series of products. MFRC522 supports the higher-speed non-contact communication of the MIFARE series, with a two-way data transmission rate of up to 424kbit/s. As a new member of the 13.56MHz high-integration card reader/writer series chip family, MF RC522 has many similarities with MF RC500 and MF RC530 but also has many features and differences. The communication between it and the host adopts SPI mode, which is conducive to reducing the connection, reducing the size of the PCB board and reducing the cost. [Introduction to RFID Module] The MF522-MINI module adopts the RC522 chip to design the card reading circuit. The module works at 13.56MHz frequency, conforms to the ISO14443A standard, and can support Mifare1 S50, Mifare1 S70, Mifare Light, Mifare UltraLight, and Mifare Pro. It is suitable for users of advanced applications such as equipment development and card reader development, and users who need to design/produce radio frequency card terminals. This module can be directly loaded into various card reader molds. The module uses a voltage of 3.3V, and can directly connect to any user's CPU motherboard through a few simple lines of the SPI interface, which can ensure the stable and reliable work of the module and the long distance of the card; the module is easy to use, highly reliable, and small in size. And other features can help customers to conveniently and quickly apply contactless cards to the system. [Introduction to electrical parameters] Working current: 13—26mA/DC 3.3V Idle current: 10-13mA/DC 3.3V Sleep current: <80uA Peak current: <30mA Working frequency: 13.56MHz Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire Product physical characteristics: size: 37.5mm×33mm Environmental working temperature: -20—80 degrees Celsius Environmental storage temperature: -40-85 degrees Celsius Environmental relative humidity: relative humidity 5% -95% 【Shipping list】 1. One RC522 MINI module; 2. A standard S50 blank card; 3. One S50 special-shaped card (the shape of the keychain as shown in the picture); 4. One straight row and one curved row pin;
RFID modul RC522 mini Kits S50 13,56 Mhz 6cm címkékkel SPI Write & Read for arduino uno 2560 RFID module RC522 mini Kits S50 13.56 Mhz 6cm With Tags SPI Write & Read for arduino uno 2560 [Introduction to RC522 chip] MF RC522 is a highly integrated card reader/writer chip used in 13.56MHz contactless communication. It is a low-voltage, low-cost, and small non-contact card reader/writer chip for the "three-meter" application. It is a smart meter And a better choice for the development of portable handheld devices. MF RC522 utilizes advanced modulation and demodulation concepts and fully integrates all types of passive non-contact communication methods and protocols under 13.56MHz. Support 14443A compatible transponder signal. The digital part handles ISO14443A frames and error detection. In addition, it also supports the fast CRYPTO1 encryption algorithm to verify the MIFARE series of products. MFRC522 supports the higher-speed non-contact communication of the MIFARE series, with a two-way data transmission rate of up to 424kbit/s. As a new member of the 13.56MHz high-integration card reader/writer series chip family, MF RC522 has many similarities with MF RC500 and MF RC530 but also has many features and differences. The communication between it and the host adopts SPI mode, which is conducive to reducing the connection, reducing the size of the PCB board and reducing the cost. [Introduction to RFID Module] The MF522-MINI module adopts the RC522 chip to design the card reading circuit. The module works at 13.56MHz frequency, conforms to the ISO14443A standard, and can support Mifare1 S50, Mifare1 S70, Mifare Light, Mifare UltraLight, and Mifare Pro. It is suitable for users of advanced applications such as equipment development and card reader development, and users who need to design/produce radio frequency card terminals. This module can be directly loaded into various card reader molds. The module uses a voltage of 3.3V, and can directly connect to any user's CPU motherboard through a few simple lines of the SPI interface, which can ensure the stable and reliable work of the module and the long distance of the card; the module is easy to use, highly reliable, and small in size. And other features can help customers to conveniently and quickly apply contactless cards to the system. [Introduction to electrical parameters] Working current: 13—26mA/DC 3.3V Idle current: 10-13mA/DC 3.3V Sleep current: <80uA Peak current: <30mA Working frequency: 13.56MHz Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire Product physical characteristics: size: 37.5mm×33mm Environmental working temperature: -20—80 degrees Celsius Environmental storage temperature: -40-85 degrees Celsius Environmental relative humidity: relative humidity 5% -95% 【Shipping list】 1. One RC522 MINI module; 2. A standard S50 blank card; 3. One S50 special-shaped card (the shape of the keychain as shown in the picture); 4. One straight row and one curved row pin; 1005003517113509 - fullstar
[Introduction to RC522 chip] MF RC522 is a highly integrated card reader/writer chip used in 13.56MHz contactless communication. It is a low-voltage, low-cost, and small non-contact card reader/writer chip for the "three-meter" application. It is a smart meter And a better choice for the development of portable handheld devices. MF RC522 utilizes advanced modulation and demodulation concepts and fully integrates all types of passive non-contact communication methods and protocols under 13.56MHz. Support 14443A compatible transponder signal. The digital part handles ISO14443A frames and error detection. In addition, it also supports the fast CRYPTO1 encryption algorithm to verify the MIFARE series of products. MFRC522 supports the higher-speed non-contact communication of the MIFARE series, with a two-way data transmission rate of up to 424kbit/s. As a new member of the 13.56MHz high-integration card reader/writer series chip family, MF RC522 has many similarities with MF RC500 and MF RC530 but also has many features and differences. The communication between it and the host adopts SPI mode, which is conducive to reducing the connection, reducing the size of the PCB board and reducing the cost. [Introduction to RFID Module] The MF522-MINI module adopts the RC522 chip to design the card reading circuit. The module works at 13.56MHz frequency, conforms to the ISO14443A standard, and can support Mifare1 S50, Mifare1 S70, Mifare Light, Mifare UltraLight, and Mifare Pro. It is suitable for users of advanced applications such as equipment development and card reader development, and users who need to design/produce radio frequency card terminals. This module can be directly loaded into various card reader molds. The module uses a voltage of 3.3V, and can directly connect to any user's CPU motherboard through a few simple lines of the SPI interface, which can ensure the stable and reliable work of the module and the long distance of the card; the module is easy to use, highly reliable, and small in size. And other features can help customers to conveniently and quickly apply contactless cards to the system. [Introduction to electrical parameters] Working current: 13—26mA/DC 3.3V Idle current: 10-13mA/DC 3.3V Sleep current: <80uA Peak current: <30mA Working frequency: 13.56MHz Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire Product physical characteristics: size: 37.5mm×33mm Environmental working temperature: -20—80 degrees Celsius Environmental storage temperature: -40-85 degrees Celsius Environmental relative humidity: relative humidity 5% -95% 【Shipping list】 1. One RC522 MINI module; 2. A standard S50 blank card; 3. One S50 special-shaped card (the shape of the keychain as shown in the picture); 4. One straight row and one curved row pin;
