GY-LSM6DS3 modul 6 Degrees of Freedom Breakout IIC/SPI átvitel
GY-LSM6DS3 module 6 Degrees of Freedom Breakout IIC/SPI transmission
Description: The
LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO
buffer and embedded processing interrupt functions, specifically
targeted at the cellphone market. Due to the capabilities and low cost
of the LSM6DS3 we’ve created this small breakout board just for you!
Each LSM6DS3 Breakout has been designed to be super-flexible and can be
configured specifically for many applications. With the LSM6DS3 Breakout
you will be able to detect shocks, tilt, motion, taps, count steps, and
even read the temperature!
The
LSM6DS3 is capable of reading accelerometer data up to 6.7kS/s and
gyroscope data up to 1.7kS/s for more accurate movement sensing. As
stated before this breakout also has the ability to buffer up to 8kB of
data between reads, host other sensors, and drive interrupt pins all
thanks to the LSM6DS3’s built-in FIFO.
Each pin has been broken out on the LSM6DS3, with one side of the board featuring power and I2C
functionality while the other side sporting pins that control SPI
functionality and interrupt outputs. Please keep in mind that the
LSM6DS3 is a 3.3V device so supplying voltages greater than ~3.6V can
permanently damage the IC. A logic level shifter is required for any
development platform operating at 5V.
Features:
Power consumption: 0.9 mA in combo normal mode and 1.25 mA in combo high-performance mode up to 1.6 kHz.
“Always on” experience with low power consumption for both accelerometer and gyroscope
Smart FIFO up to 8 kbyte based on features set
±2/±4/±8/±16 g full scale
±125/±245/±500/±1000/±2000 dps full scale
Analog supply voltage: 1.71 V to 5 V
SPI/I2C serial interface with main processor data synchronization feature
Embedded temperature sensor
Size: 13mm*18mm
1005003518850995 - fullstar