• -40%

6 szál 22V24V-os elektromos kéziszerszám, napelemes világítás, 18650 speciális lítium akkumulátor védőlap BMS

6 szál 22V24V-os elektromos kéziszerszám, napelemes világítás, 18650 speciális lítium akkumulátor védőlap BMS

198 Ft 40% megtakarítás
330 Ft
Nincs adó
Note: The lithium battery protection board cannot be used for lithium iron phosphate batteries, hernia lights, hand drill battery packs, electric fish machine battery packs, electric bicycle battery packs, children's car batteries, power motors above 550, and 1W fisheye LEDs. Lamps, please pay attention to customers who purchase the above combination! .
The power range described is applicable to the following products:
Massager battery pack, LED lamp backup power supply, 12V electronic products, solar street lamp battery pack, monitoring backup power supply, and other products.
Note: For products with a current above 3A, the battery discharge rate must be above 3C.
The magnification calculation formula: for a battery with a 1C magnification, the capacity of 2000 is equal to 2AH*1=2A working current.
3C rate battery, 2000 capacity is equal to 2AH*3=6A working current.
In use, the battery will heat up, which means that the battery rate is not applicable. In this case, the battery cannot be used for a long time, and the battery will be damaged quickly.
Note 1: Wiring 0V(B-), 3.7V(B1), 7.4V(B2), 11.1V(B3), 14.8V(B4), 18.5V(B5), 22.2V(B ) strictly according to the diagram, Don't short circuit on purpose!
Note 2: After the line is connected, it needs to be charged before output.
Note 3: When connecting 6 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are not the same, please charge each group of batteries separately and then use them in series. During the discharge test, the battery with the fastest voltage drop is the poor battery.
Explain: Don't mix good batteries and bad batteries together! The closer the capacity/internal resistance of the 6 groups of batteries, the better! (4 good batteries 2 bad batteries = 6 bad batteries).
Description and explanation:
6 strings (for 6 18650 batteries or polymer lithium batteries in series combination)
21.6V (rated voltage of polymer battery)
22.2V (18650 or 3.7V lithium battery rated voltage)
25.2V (Voltage after fully charged lithium battery)
Discharge 22A (refers to the upper limit discharge current limit)
6serieslithiumionbatteryprotectionboardelectricalparameters

Basic item

Specification

Unit

Remarks
Current

Continuous discharge current

14

A

Instantaneous discharge current

22

A

Recharge

Charging voltage

Lithium battery charger 25.2V

V

recharging current

25(MAX)

A

Overcharge protection

Overcharge detection voltage

4.28±0.05

V

Single core
Overcharge protection delay

0.5

S

Overcharge release voltage

4.08±0.05

V

Single core
Power balance

Cell balance detection voltage

/

V

Cell balance release voltage

/

V

Cell balance current

/

mA

Over discharge protection

Over discharge detection voltage

2.55±0.08

V

Over discharge detection delay

0.1

S

Over discharge release voltage

2.9±0.1

V

Overcurrent protection

Overcurrent detection voltage

150

mV

Overcurrent detection delay

9

MS

Overcurrent protection current

75±5

A

Overcurrent protection release condition

Disconnect load


Short circuit protection

Short circuit protection conditions

Short circuit of external load


Short circuit detection delay

250

uS

Short circuit protection release condition

Disconnect load


Temperature protection

Temperature protection

/



On demand
Internal resistance

Main circuit conduction internal resistance

≤20



Self-consumption

Working current

≤30

uA

Sleep current(when the battery is over-discharged)

≤10

uA

Operating temperature

temperature range

-30~ 80



size

/

53.5*35.5*3.6

mm

weight

/

8

g
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

6 szál 22V24V-os elektromos kéziszerszám, napelemes világítás, 18650 speciális lítium akkumulátor védőlap BMS
6 strings of 22V24V power tools, solar lighting, 18650 special lithium battery protection board BMS
Note: The lithium battery protection board cannot be used for lithium iron phosphate batteries, hernia lights, hand drill battery packs, electric fish machine battery packs, electric bicycle battery packs, children's car batteries, power motors above 550, and 1W fisheye LEDs. Lamps, please pay attention to customers who purchase the above combination! .
The power range described is applicable to the following products:
Massager battery pack, LED lamp backup power supply, 12V electronic products, solar street lamp battery pack, monitoring backup power supply, and other products.
Note: For products with a current above 3A, the battery discharge rate must be above 3C.
The magnification calculation formula: for a battery with a 1C magnification, the capacity of 2000 is equal to 2AH*1=2A working current.
3C rate battery, 2000 capacity is equal to 2AH*3=6A working current.
In use, the battery will heat up, which means that the battery rate is not applicable. In this case, the battery cannot be used for a long time, and the battery will be damaged quickly.
Note 1: Wiring 0V(B-), 3.7V(B1), 7.4V(B2), 11.1V(B3), 14.8V(B4), 18.5V(B5), 22.2V(B ) strictly according to the diagram, Don't short circuit on purpose!
Note 2: After the line is connected, it needs to be charged before output.
Note 3: When connecting 6 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are not the same, please charge each group of batteries separately and then use them in series. During the discharge test, the battery with the fastest voltage drop is the poor battery.
Explain: Don't mix good batteries and bad batteries together! The closer the capacity/internal resistance of the 6 groups of batteries, the better! (4 good batteries 2 bad batteries = 6 bad batteries).
Description and explanation:
6 strings (for 6 18650 batteries or polymer lithium batteries in series combination)
21.6V (rated voltage of polymer battery)
22.2V (18650 or 3.7V lithium battery rated voltage)
25.2V (Voltage after fully charged lithium battery)
Discharge 22A (refers to the upper limit discharge current limit)
6serieslithiumionbatteryprotectionboardelectricalparameters

Basic item

Specification

Unit

Remarks
Current

Continuous discharge current

14

A

Instantaneous discharge current

22

A

Recharge

Charging voltage

Lithium battery charger 25.2V

V

recharging current

25(MAX)

A

Overcharge protection

Overcharge detection voltage

4.28±0.05

V

Single core
Overcharge protection delay

0.5

S

Overcharge release voltage

4.08±0.05

V

Single core
Power balance

Cell balance detection voltage

/

V

Cell balance release voltage

/

V

Cell balance current

/

mA

Over discharge protection

Over discharge detection voltage

2.55±0.08

V

Over discharge detection delay

0.1

S

Over discharge release voltage

2.9±0.1

V

Overcurrent protection

Overcurrent detection voltage

150

mV

Overcurrent detection delay

9

MS

Overcurrent protection current

75±5

A

Overcurrent protection release condition

Disconnect load


Short circuit protection

Short circuit protection conditions

Short circuit of external load


Short circuit detection delay

250

uS

Short circuit protection release condition

Disconnect load


Temperature protection

Temperature protection

/



On demand
Internal resistance

Main circuit conduction internal resistance

≤20



Self-consumption

Working current

≤30

uA

Sleep current(when the battery is over-discharged)

≤10

uA

Operating temperature

temperature range

-30~ 80



size

/

53.5*35.5*3.6

mm

weight

/

8

g
1005003559694156 - fullstar
1005003559694156

Hasonló kategóriák mint 16 :

Reviews

Write your review

6 szál 22V24V-os elektromos kéziszerszám, napelemes világítás, 18650 speciális lítium akkumulátor védőlap BMS

Note: The lithium battery protection board cannot be used for lithium iron phosphate batteries, hernia lights, hand drill battery packs, electric fish machine battery packs, electric bicycle battery packs, children's car batteries, power motors above 550, and 1W fisheye LEDs. Lamps, please pay attention to customers who purchase the above combination! .
The power range described is applicable to the following products:
Massager battery pack, LED lamp backup power supply, 12V electronic products, solar street lamp battery pack, monitoring backup power supply, and other products.
Note: For products with a current above 3A, the battery discharge rate must be above 3C.
The magnification calculation formula: for a battery with a 1C magnification, the capacity of 2000 is equal to 2AH*1=2A working current.
3C rate battery, 2000 capacity is equal to 2AH*3=6A working current.
In use, the battery will heat up, which means that the battery rate is not applicable. In this case, the battery cannot be used for a long time, and the battery will be damaged quickly.
Note 1: Wiring 0V(B-), 3.7V(B1), 7.4V(B2), 11.1V(B3), 14.8V(B4), 18.5V(B5), 22.2V(B ) strictly according to the diagram, Don't short circuit on purpose!
Note 2: After the line is connected, it needs to be charged before output.
Note 3: When connecting 6 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are not the same, please charge each group of batteries separately and then use them in series. During the discharge test, the battery with the fastest voltage drop is the poor battery.
Explain: Don't mix good batteries and bad batteries together! The closer the capacity/internal resistance of the 6 groups of batteries, the better! (4 good batteries 2 bad batteries = 6 bad batteries).
Description and explanation:
6 strings (for 6 18650 batteries or polymer lithium batteries in series combination)
21.6V (rated voltage of polymer battery)
22.2V (18650 or 3.7V lithium battery rated voltage)
25.2V (Voltage after fully charged lithium battery)
Discharge 22A (refers to the upper limit discharge current limit)
6serieslithiumionbatteryprotectionboardelectricalparameters

Basic item

Specification

Unit

Remarks
Current

Continuous discharge current

14

A

Instantaneous discharge current

22

A

Recharge

Charging voltage

Lithium battery charger 25.2V

V

recharging current

25(MAX)

A

Overcharge protection

Overcharge detection voltage

4.28±0.05

V

Single core
Overcharge protection delay

0.5

S

Overcharge release voltage

4.08±0.05

V

Single core
Power balance

Cell balance detection voltage

/

V

Cell balance release voltage

/

V

Cell balance current

/

mA

Over discharge protection

Over discharge detection voltage

2.55±0.08

V

Over discharge detection delay

0.1

S

Over discharge release voltage

2.9±0.1

V

Overcurrent protection

Overcurrent detection voltage

150

mV

Overcurrent detection delay

9

MS

Overcurrent protection current

75±5

A

Overcurrent protection release condition

Disconnect load


Short circuit protection

Short circuit protection conditions

Short circuit of external load


Short circuit detection delay

250

uS

Short circuit protection release condition

Disconnect load


Temperature protection

Temperature protection

/



On demand
Internal resistance

Main circuit conduction internal resistance

≤20



Self-consumption

Working current

≤30

uA

Sleep current(when the battery is over-discharged)

≤10

uA

Operating temperature

temperature range

-30~ 80



size

/

53.5*35.5*3.6

mm

weight

/

8

g

Write your review