433 MHz-es 4 csatornás EV1527 PT2262 dekódoló modul, vezeték nélküli RF vevőcsatlakozó DUE UNO MEGA2560
433MHz 4 Channel EV1527 PT2262 Decode Module Wireless RF Receiver Plug-in DUE UNO MEGA2560
 
 
 
 
Packing list : 1 pcs 433M 1527/2262 Superheterodyne  Receiver decoder module;
Demo :
 
Can directly insert Arduiuo UNO/MEGA2560(also can use other MCU:ARM FPGA/CPLD PIC AVR Etc.)  
 
Model No.

CE006
Operating voltage

3.3V-5.5V
 Working priceple

 Super Heterodyne receiver with decoder , learning type . decoding PT2262, PT2260, PT2240, EV1527 and other learning codeto chip or compatible chips, can learn and store 30 pcs different coded remote control.Intelligently distinguish shock resistance between fixed code and learning code , such as PT2262 and EV1527.
Static current

≤6 mA (DC 5V)
Operating frequency

433MHz
modulation Mode

ASK/OOK
Receiving sensitivity

 -110 dBm (50 Ω)
Speed

< 2.4 K bps
Operating temp.

-30 °C ~ 85 °C
Max rate 2.4 KHZ
Antenns length

18 cm (433.92 MHz)
Dimension

28*12.5*5mm
Output mode

TTL level , Momentary, Latch, Toggle ,user can set it  by welding, Momentary is defult.
IO Drive
Sink Current (Low level drive) 15mA,source current(High level drive) 12mA
 
Work mode (programmable )
singnal Inter-locking (Latch)
singnal Self-locking (Toggle  )
singnal Non-locking (Momentary   is defult )
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
  
User guide :
1: Learing ID : Press learning button(Key button) 2 seconds, LED is flashes once and beginning to learn ;after learning success , LED will flash for a while .
2: Delete ID : Keep pressing learning button for 8 seconds , LED will be on and enter deleting . LED off means finishing deleting;
3: Antenna with a soft wire or other hard metals (such as whip antenna), try to straighten. Do not go near metal objects;
4: Power supply voltage requires stable and low ripple factor, multi-level filtering (such as adding beads, inductors, capacitors, etc.);
 
 
32335011958/2 - shop1525466