2.4Ghz 20dBm vezeték nélküli RF soros UART modul 5V 3V AT parancs cserélje ki a CC1101 SI4432
2.4Ghz 20dBm wireless RF serial UART module 5V 3V AT command replace CC1101 SI4432
Product Name: 20dBm RS232 (TTL Level) Wireless Transceiver Module TTL232 Serial ports 2.4G RF Board 5V 3V replace CC1101 CC2500 SI4432 SI4463
 
 
 
Packing list:
1 pcs 2.4G 20dBm RS232(TTL Lever) Wireless Transceiver Module
 
Overview:
   
TB387 is based on 2.4GHz frequency band wireless transparent data-transmission module.
This Module supports most basic AT commands: baud rate, ID number, frequency settings and inquiries; factory settings; version information.
When the module is in AT module, users can use serial-port to issue AT commands to set the module's parameters.
When the module is in transparent data transfer mode, the user transmit data, frame number data module, add packaged rowcount, and then automatically transmit , at reliable range, the module will automatically re-transmit data to ensure successful transmission.
  
Performance Parameter:
   
Working voltage: 3.3V-5.5V;
RS232 Interface ( 3.3V/5V TTL level)
Frequency range: 2402~2482MHz
Transmit power: 20dBm(100mw);
Receiver sensitivity: -87dBm;
Operating temperature: -40~ 85 ° c;
Transparent transmission mode baud rate:
2400,4800,9600(Default),14400,19200,38400,57600,115200,12800,25600
AT mode configured baud rate fix is: 9600;
Open ground Transmission distance : 400M 
 
Pinout :
1, VDD:3.3V or 5V power supply ;
2, GND: Power Ground;
3, TXD: serial port output, MCU or USB to serial port RXD;
4, RXD: serial port input,  MCU  or USB to serial port TXD;
5, CMD: Enter PIN AT mode, active low level;
 
AT Commands Data Sheet : Please contact seller on message ;
 
 

 
Typical applications:
    
2402-2482MHz ISM/SRD band systems
for Arduiuo UNO MEGA2560 DUE MCU
Consumer electronics
Access control, Attendance, Logistics
Smart Furniture
Robert
Wireless sensor
Smart Home
   
 
 
Application example:
Wireless communication between UNO and PC(Also application with other 3.3V/5V level MCU ,for example:   Raspberry pi  FPGA CPLD STM32 C8051 PIC AVR MSP430)
 
for this Applications you also need:  
1: USB to ttl cable; Click here
2:  UNO/MEGA2560/DUE
 
 
 
ARDUIUO IDE Serial data Transceiver:
 
 
Copy the following code:
//----------------------------------------------------------------------//
 
// Pin 13 has an LED connected on most ARDUIUO boards.
int led = 13;
 
String comdata = "";
 
void setup()
{
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
Serial.begin(9600);
Serial.println("Hello, I am Arduiuo!");
}
 
//Serial data transceiver
void loop()
{
while (Serial.available() > 0)
{
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
comdata = char(Serial.read());
delay(2);
}
 
if (comdata.length() > 0)
{
Serial.println(comdata);
comdata = "";
}
 
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
}
 //----------------------------------------------------------------------// 
32272452103/2 - shop1525466