XY-WT01 hőmérsékletszabályozó digitális LED kijelző fűtés/hűtés szabályozó termosztát kapcsoló
XY-WT01 Temperature Controller Digital LED Display Heating/Cooling Regulator Thermostat Switch
Product Features:
1. Heating mode 'H':
When the detected temperature is less than or equal to the set temperature - the hysteresis temperature, the relay is turned on, and the heating equipment starts to work;
When the detected temperature ≥ the set temperature, the relay is disconnected and the heating equipment stops working;
2. Cooling mode 'C':
When the detected temperature ≥ set temperature hysteresis temperature, the relay is turned on, and the refrigeration equipment starts to work;
When the detected temperature is less than or equal to the set temperature, the relay is disconnected and the refrigeration equipment stops working;
3. High temperature alarm function ALA:
When the actual temperature is greater than or equal to the alarm temperature, the system will turn on the sound and light alarm, disconnect the relay, and stop the sound and light with any key;
4. Delay start OPH:
When a normal heating or cooling work is completed, the system starts timing T, and only when T≥OPH can the system perform the next round of heating or cooling work;
5. Temperature correction function OFE (-10.0~10.0℃):
When the system works for a long time, there may be deviations, which can be corrected by this function, the actual temperature = measured temperature calibration value;
6. Parameter remote read/set:
Parameters such as start temperature, stop temperature, and temperature correction can be set through UART;
7. Real-time temperature report:
If the temperature reporting function is enabled, the product will transmit the detected temperature to the terminal through UART at 1s intervals, which is convenient for data collection;
8. Relay enable (default on):
If the relay enable is turned off, the relay remains disconnected;
9. Factory reset:
Press the STOP and SET keys at the same time for more than 3S to restore the factory settings;
Working mode/setting temperature/return temperature setting:
1. In the running interface, short press the SET button to enter the quick setting interface;
2. After entering the quick setting interface, short press the SET button to switch the parameters to be set (working mode/set temperature/return temperature);
3. Through the UP DOWN key, modify the parameter value, support short press/long press;
4. Press and hold SET for more than 3S or continue for 6S without any key operation, exit the quick setting interface, and save the parameters;
1005004219933307. - miyu