- -43%
10000 W tirisztoros teljesítmény szabályozó AC 220 V SCR fényerőszabályzók nagy teljesítményű elektronikus digitális
10000 W tirisztoros teljesítmény szabályozó AC 220 V SCR fényerőszabályzók nagy teljesítményű elektronikus digitális
1 061 Ft
43% megtakarítás
1 862 Ft
Nincs adó
10000W Thyristor Power Regulator AC 220V SCR Dimmers High Power Electronic Digital Regulator Dimming Speed Voltage Regulator
Specification:
Work Voltage: AC 220V
Maximum power: 10000W, 5000W internal resistive load for long time at room temperature
Voltage Regulation: 0-220v, starting from about 10, under resistive load conditions.
Fuction:
The new bidirectional high-power thyristor is used, because the current can reach 100 amps, which solves the over-current problem caused by the resistance of the electric furnace wire being too small under cooling; it can easily adjust the output voltage of the mains, Adjust between -220v for electrical appliances. Such as: electric furnace, water heater, dimming of lamps, small motor speed, electric iron temperature. So as to achieve the effects of dimming, temperature and pressure. Available for large appliances with an electric power of less than 10,000 watts. Because the power is already large, ordinary household appliances or small factories are sufficient. (The power of the inductive or capacitive load should be reduced. This voltage regulator is equipped with a bidirectional high-power thyristor, which can be used without adding any components, which is very convenient and practical.)
Thicken the radiator. External potentiometer, no longer use the potentiometer to fix, effectively avoid the radiator is too heavy to cause potential damage and scrap.EASY USE IT~
Note:
This product is AC input and AC output. It can only be stepped down and connected to the load to regulate the voltage. It is useless to connect the multimeter without load. It is not a transformer.
Specification:
Work Voltage: AC 220V
Maximum power: 10000W, 5000W internal resistive load for long time at room temperature
Voltage Regulation: 0-220v, starting from about 10, under resistive load conditions.
Fuction:
The new bidirectional high-power thyristor is used, because the current can reach 100 amps, which solves the over-current problem caused by the resistance of the electric furnace wire being too small under cooling; it can easily adjust the output voltage of the mains, Adjust between -220v for electrical appliances. Such as: electric furnace, water heater, dimming of lamps, small motor speed, electric iron temperature. So as to achieve the effects of dimming, temperature and pressure. Available for large appliances with an electric power of less than 10,000 watts. Because the power is already large, ordinary household appliances or small factories are sufficient. (The power of the inductive or capacitive load should be reduced. This voltage regulator is equipped with a bidirectional high-power thyristor, which can be used without adding any components, which is very convenient and practical.)
Thicken the radiator. External potentiometer, no longer use the potentiometer to fix, effectively avoid the radiator is too heavy to cause potential damage and scrap.EASY USE IT~
Note:
This product is AC input and AC output. It can only be stepped down and connected to the load to regulate the voltage. It is useless to connect the multimeter without load. It is not a transformer.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek