• -40%

TDA7297 erősítőkártya 15W 15W 2.0 csatornás DC 6-18V Audio Power AMP hangerőszabályzó hangkártyával hangszórókhoz

TDA7297 erősítőkártya 15W 15W 2.0 csatornás DC 6-18V Audio Power AMP hangerőszabályzó hangkártyával hangszórókhoz

292 Ft 40% megtakarítás
486 Ft
Nincs adó
Specification:
1. Onboard TDA7297 audio power amplifier chip, dual-channel 15W 15W, suitable for 4-8 ohm 10-50W speakers
2. The main pins of the chip have been led out to facilitate the control of external devices. There are two 5.08 (mm) spacing 2P binding posts on the board to connect the left and right channels respectively.
3. The onboard dial potentiometer can adjust the volume output
4. Support DC base, terminal block, pin header power input mode 3. The default is DC base, working voltage: 6-18V
5. Circuit board size: 45(mm)x33(mm)
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

TDA7297 erősítőkártya 15W 15W 2.0 csatornás DC 6-18V Audio Power AMP hangerőszabályzó hangkártyával hangszórókhoz
TDA7297 Amplifier Board 15W 15W 2.0 Channel DC 6-18V Audio Power AMP with Volume Control Sound Board for Speakers
Specification:
1. Onboard TDA7297 audio power amplifier chip, dual-channel 15W 15W, suitable for 4-8 ohm 10-50W speakers
2. The main pins of the chip have been led out to facilitate the control of external devices. There are two 5.08 (mm) spacing 2P binding posts on the board to connect the left and right channels respectively.
3. The onboard dial potentiometer can adjust the volume output
4. Support DC base, terminal block, pin header power input mode 3. The default is DC base, working voltage: 6-18V
5. Circuit board size: 45(mm)x33(mm)
1005002803778522. - pingto
1005002803778522.

Hasonló kategóriák mint 16 :

Reviews

Write your review

TDA7297 erősítőkártya 15W 15W 2.0 csatornás DC 6-18V Audio Power AMP hangerőszabályzó hangkártyával hangszórókhoz

Specification:
1. Onboard TDA7297 audio power amplifier chip, dual-channel 15W 15W, suitable for 4-8 ohm 10-50W speakers
2. The main pins of the chip have been led out to facilitate the control of external devices. There are two 5.08 (mm) spacing 2P binding posts on the board to connect the left and right channels respectively.
3. The onboard dial potentiometer can adjust the volume output
4. Support DC base, terminal block, pin header power input mode 3. The default is DC base, working voltage: 6-18V
5. Circuit board size: 45(mm)x33(mm)

Write your review