Frissített /NANO V3.0 ATmega328 Extended Kompatibilis az arduino ATTINY88 Micro Development Board 16Mhz-hez /Digispark ATTINY85
Upgraded /NANO V3.0 ATmega328 Extended Compatible for arduino ATTINY88 Micro Development Board 16Mhz /Digispark ATTINY85
Product Description
The MH-ET LIVE Tiny88(16.0Mhz) based microcontroller development board similar to the arduino line, only cheaper, smaller, and a bit less powerful. With the ability to use the familiar arduino IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much.The MH-ET LIVE Tiny88(16.0Mhz) is shipped fully assembled except for the headersincluded and easy to solder them by yourself.
Specs:
Support for the arduino IDE 1.0 (OSX/Win/Linux)
1. Power via USB or External Source - 5v or 7-35v (12v or less recommended,
automatic selection)
2. On-board 500ma 5V Regulator
3. Built-in USB
4. 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
5. 8k Flash Memory (about 6k after bootloader)
6. I2C and SPI
7. 26-PWM (26 pins with Software PWM,only two(D9,D10) with hardware PWM )
8. ADC on 8 pins
9. Power LED and Test/Status LED
10. Size(mm):44.5x18.3x3
PinOut:
Installation Instructions:
First download the appropriate arduino package at the Arduino.cc website: http://www.arduino.cc/en/Main/Software
If using Arduino 1.6.6 or higher and windows - you will need to download and install the drivers manually. Download, unzip and run “Install Drivers” (on 32bit systems) or “DPInst64” (on 64bit systems). The driver files are located here: http://github.com/MHEtLive/MHEtLiveArduino/releases/download/1.0.0/
2.0a4.rar
Install or Unzip the arduino application.
Run the arduino application.
In the arduino application go to the “File” menu and select “Preferences”,In the box labeled “Additional Boards Manager URLs” enter:
http://raw.githubusercontent.com/MHEtLive/arduino-boards-index/master/p
ackage_mhetlive_index.json and click OK;
Go to the "Tools" menu, and then in the "Board" sub-menu-select "Board Manager from the Type drop-down list", and then down select "Submission":
Select the "MH-ET LIVE Boards" package and click the "Install" button.
You will see the download progress on the bottom bar of the "Boards Manager" window, and "Installed" will be displayed next to the item in the list after completion.
WINDOWS users: After the installation is complete, a driver installation wizard window will pop up, please click "Next" in this window to install the MH-ET LIVE driver
Boards (if you have already installed them, this installer will update them and install any missing ones).
After the installation is complete, close the "Boards Manager" window and select MH-ET LIVE Boards "MH-ET LIVE Tiny88(16.0Mhz)" from the Tools→Boards menu.
Choose the example that comes with Arduino IDE: select the development board as MH-ET LIVE Tiny88 in the toolbar, open the program in File>> Example>>Basic>>Blink, and change the port 13 in the program to 0. Follow the above method to transplant, compile and download to MH-ET LIVE Tiny88 (16.0Mhz), you can see the onboard LED light flashes according to the prompt
(Note: When downloading the program, do not connect the module first. After the compilation is completed, wait for the prompt to insert the module, then insert it, and wait for the automatic download to complete).
1005003298694349. - pingto