- -43%
3S 20A Li-ion Li-ion Akkumulátor 18650 Töltő PCB BMS Védőtábla 12.6V Cell 59x20x3.4mm Modul
3S 20A Li-ion Li-ion Akkumulátor 18650 Töltő PCB BMS Védőtábla 12.6V Cell 59x20x3.4mm Modul
163 Ft
43% megtakarítás
286 Ft
Nincs adó
Description
Charging Voltage: 12.6V~13.6V
Continuous Discharge Current (upper limit): 20A(If the cooling environment is not good, please reduce the use of load current.)
Continuous Charge Current (upper limit): 10A
Size: About 59x20x3.4mm/1.97x0.79x0.13"
Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery)
Attentions
1. Please allow tiny size deviations due to human measurement.
2. This item is an enhanced version BMS PCB without any equalized charging.
3. The successful start of the drill requires three 10C-20C power battery, or six 5C-10C power battery(ordinary 18650 can not start the drill!!).
4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V. For 0V and 12.6V cables, use copper wire of 2 square millimeters or more. Do not use nickel plates!
5. When connecting 3 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are different, please charge each battery group individually and reconnect it in series.
6. Do not mix good batteries with bad ones.
7. The closer the internal resistance of the three battery capacities is the better.
Charging Voltage: 12.6V~13.6V
Continuous Discharge Current (upper limit): 20A(If the cooling environment is not good, please reduce the use of load current.)
Continuous Charge Current (upper limit): 10A
Size: About 59x20x3.4mm/1.97x0.79x0.13"
Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery)
Attentions
1. Please allow tiny size deviations due to human measurement.
2. This item is an enhanced version BMS PCB without any equalized charging.
3. The successful start of the drill requires three 10C-20C power battery, or six 5C-10C power battery(ordinary 18650 can not start the drill!!).
4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V. For 0V and 12.6V cables, use copper wire of 2 square millimeters or more. Do not use nickel plates!
5. When connecting 3 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are different, please charge each battery group individually and reconnect it in series.
6. Do not mix good batteries with bad ones.
7. The closer the internal resistance of the three battery capacities is the better.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek