• -43%

SATA/PATA/IDE meghajtó-USB 2.0 adapter átalakító kábel 2,5/3,5 hüvelykes merevlemez-meghajtóhoz, világszerte

SATA/PATA/IDE meghajtó-USB 2.0 adapter átalakító kábel 2,5/3,5 hüvelykes merevlemez-meghajtóhoz, világszerte

841 Ft 43% megtakarítás
1 476 Ft
Nincs adó
The USB interface connected to the 2.5 and 3.5 inch IDE and SATA hard disk interface; USB2.0 TO IDE/SATA high-speed connection. USB2.0 high speed transmission, stable performance, Support CR cd-rom, DVD, cd-rom, CD - RW, DVD RW.
Support system: Windows 2000, me, XP, Vista and Mac OS; Under Windows 2000 / ME/XP/Vista, don't need The drive; the solidification structure, stable performance
USB transfer IDE/SATA conversion line
conversion head integration (2.5 inch, 3.5 inch, type hard disk (below 320 g), cd-rom (The recorder)
support hot plug, plug and play. can be used in hard disk, cd-rom, Campbell, MO, ZIP transfer thereof. good compatibility, can realize data exchange across the hardware platform. transfer rate quickly, the transfer rate of up to 480 MB/s.
Using Information:
1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using.
(there is no power cord and other accessories)
2.the connection order
(1)first connect the power cord line to 220 v mains.
(2)connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large, a few may be burned power adapter).
(3) connect the USB cable to your PC, and power on the hard disk box , can exchange data after the computer identify USB device a few minutes later.
3. hard disk box removal
Remove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.
Notice : The power adapter belongs to High heating equipment, please pay attention to keep good heat dissipation.Please remove the ac adapter, If you do not use it. Do not connect it with the wiring board, so as not to accelerate the ageing of the electronic components and lower the service life of the product. Summer arriving, the weather is hot, don't use hard disk box or drive line time for a long time, it is easy to burn in such hot weather.
colour: as shown
Material: plastic
Package Contents:
1 x USB 2.0 to IDE SATA Adaptor Cable
1 x 4 Pin power cable
1 x SATA cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

SATA/PATA/IDE meghajtó-USB 2.0 adapter átalakító kábel 2,5/3,5 hüvelykes merevlemez-meghajtóhoz, világszerte használható adapter-átalakító kábel
SATA/PATA/IDE Drive To USB 2.0 Adapter Converter Cable For 2.5/3.5 Inch Hard Drive Hot Worldwide Adapter Converter Cable
The USB interface connected to the 2.5 and 3.5 inch IDE and SATA hard disk interface; USB2.0 TO IDE/SATA high-speed connection. USB2.0 high speed transmission, stable performance, Support CR cd-rom, DVD, cd-rom, CD - RW, DVD RW.
Support system: Windows 2000, me, XP, Vista and Mac OS; Under Windows 2000 / ME/XP/Vista, don't need The drive; the solidification structure, stable performance
USB transfer IDE/SATA conversion line
conversion head integration (2.5 inch, 3.5 inch, type hard disk (below 320 g), cd-rom (The recorder)
support hot plug, plug and play. can be used in hard disk, cd-rom, Campbell, MO, ZIP transfer thereof. good compatibility, can realize data exchange across the hardware platform. transfer rate quickly, the transfer rate of up to 480 MB/s.
Using Information:
1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using.
(there is no power cord and other accessories)
2.the connection order
(1)first connect the power cord line to 220 v mains.
(2)connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large, a few may be burned power adapter).
(3) connect the USB cable to your PC, and power on the hard disk box , can exchange data after the computer identify USB device a few minutes later.
3. hard disk box removal
Remove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.
Notice : The power adapter belongs to High heating equipment, please pay attention to keep good heat dissipation.Please remove the ac adapter, If you do not use it. Do not connect it with the wiring board, so as not to accelerate the ageing of the electronic components and lower the service life of the product. Summer arriving, the weather is hot, don't use hard disk box or drive line time for a long time, it is easy to burn in such hot weather.
colour: as shown
Material: plastic
Package Contents:
1 x USB 2.0 to IDE SATA Adaptor Cable
1 x 4 Pin power cable
1 x SATA cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
1005003328726455. - 7king
1005003328726455.

Hasonló kategóriák mint 16 :

Reviews

Write your review

SATA/PATA/IDE meghajtó-USB 2.0 adapter átalakító kábel 2,5/3,5 hüvelykes merevlemez-meghajtóhoz, világszerte

The USB interface connected to the 2.5 and 3.5 inch IDE and SATA hard disk interface; USB2.0 TO IDE/SATA high-speed connection. USB2.0 high speed transmission, stable performance, Support CR cd-rom, DVD, cd-rom, CD - RW, DVD RW.
Support system: Windows 2000, me, XP, Vista and Mac OS; Under Windows 2000 / ME/XP/Vista, don't need The drive; the solidification structure, stable performance
USB transfer IDE/SATA conversion line
conversion head integration (2.5 inch, 3.5 inch, type hard disk (below 320 g), cd-rom (The recorder)
support hot plug, plug and play. can be used in hard disk, cd-rom, Campbell, MO, ZIP transfer thereof. good compatibility, can realize data exchange across the hardware platform. transfer rate quickly, the transfer rate of up to 480 MB/s.
Using Information:
1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using.
(there is no power cord and other accessories)
2.the connection order
(1)first connect the power cord line to 220 v mains.
(2)connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large, a few may be burned power adapter).
(3) connect the USB cable to your PC, and power on the hard disk box , can exchange data after the computer identify USB device a few minutes later.
3. hard disk box removal
Remove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.
Notice : The power adapter belongs to High heating equipment, please pay attention to keep good heat dissipation.Please remove the ac adapter, If you do not use it. Do not connect it with the wiring board, so as not to accelerate the ageing of the electronic components and lower the service life of the product. Summer arriving, the weather is hot, don't use hard disk box or drive line time for a long time, it is easy to burn in such hot weather.
colour: as shown
Material: plastic
Package Contents:
1 x USB 2.0 to IDE SATA Adaptor Cable
1 x 4 Pin power cable
1 x SATA cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Write your review