• -43%

Szín: arany - Waveshare 2,13 hüvelykes E-Ink kijelző KAPCS, 250x122 felbontás 3,3 V/5 V fekete-fehér, kétszínű E-papír

Szín: arany - Waveshare 2,13 hüvelykes E-Ink kijelző KAPCS, 250x122 felbontás 3,3 V/5 V fekete-fehér, kétszínű E-papír

1 932 Ft 43% megtakarítás
3 390 Ft
Nincs adó
Ultra low power consumption, basically power is only required for refreshing
Preserved solder pads for SPI interface, compatible with other controller boards like for Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples compatible for Raspberry Pi/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
Operating voltage: 3.3V/5V
Interface: SPI
Dot pitch: 0.194 x 0.194
Resolution: 250 x 122
Display color: black, white
Grey level: 2
Partial refresh time: 0.3s
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: Less than 0.017mW
Viewing angle: Greater than 170 degree
Colour:Photo Color
Material:Plastic Metal
Size:
Outline dimension: 65mm x 30.2mm
Display size: 23.71mm x 48.55mm
Package Contents:
1 x 2.13inch e-Paper HAT
1 x RPi screws pack (2pcs)
1 x PH2.0 20cm 8Pin
Note: 100% from Waveshare
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
Waveshare 2,13 hüvelykes E-Ink kijelző KAPCS, 250x122 felbontás 3,3 V/5 V fekete-fehér, kétszínű E-papír képernyőmodul Raspberry Pi-hez
Waveshare 2.13Inch E-Ink Display HAT, 250X122 Resolution 3.3V/5V Black White Two-Color E-Paper Screen Module For Raspberry Pi
Ultra low power consumption, basically power is only required for refreshing
Preserved solder pads for SPI interface, compatible with other controller boards like for Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples compatible for Raspberry Pi/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
Operating voltage: 3.3V/5V
Interface: SPI
Dot pitch: 0.194 x 0.194
Resolution: 250 x 122
Display color: black, white
Grey level: 2
Partial refresh time: 0.3s
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: Less than 0.017mW
Viewing angle: Greater than 170 degree
Colour:Photo Color
Material:Plastic Metal
Size:
Outline dimension: 65mm x 30.2mm
Display size: 23.71mm x 48.55mm
Package Contents:
1 x 2.13inch e-Paper HAT
1 x RPi screws pack (2pcs)
1 x PH2.0 20cm 8Pin
Note: 100% from Waveshare
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
1005003210067374. - 7king
1005003210067374.

Hasonló kategóriák mint 16 :

Reviews

Write your review

Szín: arany - Waveshare 2,13 hüvelykes E-Ink kijelző KAPCS, 250x122 felbontás 3,3 V/5 V fekete-fehér, kétszínű E-papír

Ultra low power consumption, basically power is only required for refreshing
Preserved solder pads for SPI interface, compatible with other controller boards like for Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples compatible for Raspberry Pi/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
Operating voltage: 3.3V/5V
Interface: SPI
Dot pitch: 0.194 x 0.194
Resolution: 250 x 122
Display color: black, white
Grey level: 2
Partial refresh time: 0.3s
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: Less than 0.017mW
Viewing angle: Greater than 170 degree
Colour:Photo Color
Material:Plastic Metal
Size:
Outline dimension: 65mm x 30.2mm
Display size: 23.71mm x 48.55mm
Package Contents:
1 x 2.13inch e-Paper HAT
1 x RPi screws pack (2pcs)
1 x PH2.0 20cm 8Pin
Note: 100% from Waveshare
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Write your review