Szín: kék - Feszültségérzékelő modul, áram-feszültség modul feszültség adó jelátalakító modul, túlfeszültség

A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
Feszültségérzékelő modul, áram-feszültség modul feszültség adó jelátalakító modul, túlfeszültség védelem
Voltage Detection Module,Current To Voltage Module Voltage Transmitter Signal Converter Module,Overvoltage Protection
Name: Voltage detection module
Power-on shows that the measured voltage enters the standby state; First set two basic parameters, the lower limit voltage V1 and the upper limit voltage V2
1. Press once and press the setting key to display "F-1" flashing; 2. Press the set button for the second time to display the default V1 value "XX.X" flashing, press the "plus" button or the "minus" button to adjust the lower limit parameter V1
3. Press the SET button for the third time to display the default V2 value "XX.X" flashing. Press the "plus" button or the "minus" button to adjust the upper limit parameter V2 (At this time, if the V1 parameter is greater than V2, the "ERR" error prompt will be displayed, and the parameter needs to be changed. Be sure to keep V1 less than V2 as normal)
4. Press the SET key for the fourth time and save the parameters permanently; 5. In standby mode, press the "minus" button for 3 seconds to turn off the display, and press for 3 seconds to turn on the display. Designed to reduce power consumption
Function Description
1. Charging monitoring: When the measured voltage is lower than voltage 1 the relay is closed, and the voltage is higher than V2 the relay is disconnected.
2. F-2: Discharge monitoring: When the measured voltage is higher than the voltage V2, the relay is closed, and the voltage is lower than 1V, the relay is disconnected.
3. F-3: Pull-in outside the interval: When the measured voltage is between V1 and V2, the relay is disconnected and other state relays are pulled-in.
4. F-4: In-zone pull-in: when the measured voltage is between V1 and V2, the relay pulls in and the relay is disconnected in other states
5. F-5: Fixed-point monitoring: When the measured voltage is higher than V1, the relay is closed, and when the measured voltage is lower than V1, the relay is disconnected.
6. F-6: Fixed-point self-locking monitoring: When the measured voltage is higher than V1, the relay will always be closed until the power is manually turned off.
7. F-7: Fixed-point pulse monitoring: When the measured voltage is equal to V1 each time (floating up and down 0.V, the relay outputs a
size:5.6x4.3x1.7cm
Material:metal
colour:blue
Package Contents:
1 * Conversion module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
1005003206983812. - 7king