• -43%

HX711 kétcsatornás, 24 bites A / D konverziós mérésérzékelő modul fémlemezzel

HX711 kétcsatornás, 24 bites A / D konverziós mérésérzékelő modul fémlemezzel

100 Ft 43% megtakarítás
175 Ft
Nincs adó
 
Features:
 
Voltage :4.8-5 .5 v
 
Current: 1.6mA
 
Dimensions: 1.7cm * 2.9cm * 0.4cm
 
Disconnect J1 output rate 80hz, Connect J1 output rate 10hz
 
 
With metal shielding , Strong anti-interference ability.
 
Two selectable differential inputs.
 
On-chip low-noise programmable amplifier , selectable gain of 32, 64 and 128.
 
On-chip voltage regulator circuit can provide power directly to the external sensor and the chip A / D converter.
 
On-chip clock oscillator requires no external components , if necessary, can also use an external crystal or clock.
 
Automatic power on reset circuit.
 
simple digital control and serial communication : All are controlled by the input pin , the chip registers without programming.
 
selectable output data rate of 10Hz or 80Hz.
 
simultaneous rejection of 50Hz and 60Hz power interference.
 
Note: Module's DO-port, CK-port connect with single-chip, just a two-wire serial of data line and a clock line, not 232 serial protocol of computer, nor is I2C, SPI protocol 
 
 
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

HX711 kétcsatornás, 24 bites A / D konverziós mérésérzékelő modul fémlemezzel
HX711 Dual-channel 24-bit A/D Conversion Weighing Sensor Module with Metal Shied
 
Features:
 
Voltage :4.8-5 .5 v
 
Current: 1.6mA
 
Dimensions: 1.7cm * 2.9cm * 0.4cm
 
Disconnect J1 output rate 80hz, Connect J1 output rate 10hz
 
 
With metal shielding , Strong anti-interference ability.
 
Two selectable differential inputs.
 
On-chip low-noise programmable amplifier , selectable gain of 32, 64 and 128.
 
On-chip voltage regulator circuit can provide power directly to the external sensor and the chip A / D converter.
 
On-chip clock oscillator requires no external components , if necessary, can also use an external crystal or clock.
 
Automatic power on reset circuit.
 
simple digital control and serial communication : All are controlled by the input pin , the chip registers without programming.
 
selectable output data rate of 10Hz or 80Hz.
 
simultaneous rejection of 50Hz and 60Hz power interference.
 
Note: Module's DO-port, CK-port connect with single-chip, just a two-wire serial of data line and a clock line, not 232 serial protocol of computer, nor is I2C, SPI protocol 
 
 
1005001869815661 - dingheke
1005001869815661

Hasonló kategóriák mint 16 :

Reviews

Write your review

HX711 kétcsatornás, 24 bites A / D konverziós mérésérzékelő modul fémlemezzel

 
Features:
 
Voltage :4.8-5 .5 v
 
Current: 1.6mA
 
Dimensions: 1.7cm * 2.9cm * 0.4cm
 
Disconnect J1 output rate 80hz, Connect J1 output rate 10hz
 
 
With metal shielding , Strong anti-interference ability.
 
Two selectable differential inputs.
 
On-chip low-noise programmable amplifier , selectable gain of 32, 64 and 128.
 
On-chip voltage regulator circuit can provide power directly to the external sensor and the chip A / D converter.
 
On-chip clock oscillator requires no external components , if necessary, can also use an external crystal or clock.
 
Automatic power on reset circuit.
 
simple digital control and serial communication : All are controlled by the input pin , the chip registers without programming.
 
selectable output data rate of 10Hz or 80Hz.
 
simultaneous rejection of 50Hz and 60Hz power interference.
 
Note: Module's DO-port, CK-port connect with single-chip, just a two-wire serial of data line and a clock line, not 232 serial protocol of computer, nor is I2C, SPI protocol 
 
 

Write your review