• -43%

Nincs szín - Modul érintés nélküli hőmérséklet-érzékelő MLX90614 3-5v Standard IIC protokoll

Nincs szín - Modul érintés nélküli hőmérséklet-érzékelő MLX90614 3-5v Standard IIC protokoll

583 Ft 43% megtakarítás
1 022 Ft
Nincs adó
Module Non-contact Temperature Sensor MLX90614 3-5v Standard IIC protocol
Product description:
100% brand new and high quality
Made of high-quality materials, durable
Small size and low cost
Install on the breakout board with two types of pins
10k pull-up resistor for I2C interface with optional jumper
Easy to integrate
The factory-calibrated temperature range is very wide:-40 ... 125°C for sensor temperature and
-70... 380°C for object temperature.
High precision (medical) calibration in a wide temperature range (both Ta and To of 0.5 and 50°C can reach high accuracy of 0.5°C)
Measurement resolution 0.02°C
Single zone and dual zone version
SMBus compatible digital interface
Customizable PWM output for continuous reading
Simple for 8...16V applications
Sleep mode reduces power consumption
Different packaging options for application and measurement versatility
Automotive grade
Use chip: MLX90614
Power supply: 3-5v (internal low-dropout regulator)
Communication: standard IIC communication protocol
MELEXIS MLX90614ESF-BAA-000-TU-ND non-contact infrared thermometer can be used with or with any microcontroller that can communicate with it through the I2C interface.
The sensor comes with a breakout board which contains all the components required for operation and two types of pins.
They are not soldered. Please indicate if you wish to solder one of them.
The I2C interface has two jumpers, depending on your application, it may or may not need to be soldered, but it is not needed in most cases.
Applications:
High-precision non-contact temperature measurement
Thermal comfort sensor for mobile air conditioning control system
Residential, commercial and industrial building air conditioning temperature sensing element windshield defogging
Car blind angle detection
Industrial temperature control of moving parts
Temperature control in printers and copiers
Household appliances with temperature control
health care
Livestock monitoring
Motion detection
Multi-zone temperature control-up to 127 sensors can be read through a common 2-wire
Thermal relay/alarm
Temperature measurement
Package list:
1 * GY-906 MLX90614ESF sensor module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Module Non-contact Temperature Sensor MLX90614 3-5v Standard IIC protocol
Product description:
100% brand new and high quality
Made of high-quality materials, durable
Small size and low cost
Install on the breakout board with two types of pins
10k pull-up resistor for I2C interface with optional jumper
Easy to integrate
The factory-calibrated temperature range is very wide:-40 ... 125°C for sensor temperature and
-70... 380°C for object temperature.
High precision (medical) calibration in a wide temperature range (both Ta and To of 0.5 and 50°C can reach high accuracy of 0.5°C)
Measurement resolution 0.02°C
Single zone and dual zone version
SMBus compatible digital interface
Customizable PWM output for continuous reading
Simple for 8...16V applications
Sleep mode reduces power consumption
Different packaging options for application and measurement versatility
Automotive grade
Use chip: MLX90614
Power supply: 3-5v (internal low-dropout regulator)
Communication: standard IIC communication protocol
MELEXIS MLX90614ESF-BAA-000-TU-ND non-contact infrared thermometer can be used with or with any microcontroller that can communicate with it through the I2C interface.
The sensor comes with a breakout board which contains all the components required for operation and two types of pins.
They are not soldered. Please indicate if you wish to solder one of them.
The I2C interface has two jumpers, depending on your application, it may or may not need to be soldered, but it is not needed in most cases.
Applications:
High-precision non-contact temperature measurement
Thermal comfort sensor for mobile air conditioning control system
Residential, commercial and industrial building air conditioning temperature sensing element windshield defogging
Car blind angle detection
Industrial temperature control of moving parts
Temperature control in printers and copiers
Household appliances with temperature control
health care
Livestock monitoring
Motion detection
Multi-zone temperature control-up to 127 sensors can be read through a common 2-wire
Thermal relay/alarm
Temperature measurement
Package list:
1 * GY-906 MLX90614ESF sensor module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
143834790293 - shoppingind (24)
143834790293

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - Modul érintés nélküli hőmérséklet-érzékelő MLX90614 3-5v Standard IIC protokoll

Module Non-contact Temperature Sensor MLX90614 3-5v Standard IIC protocol
Product description:
100% brand new and high quality
Made of high-quality materials, durable
Small size and low cost
Install on the breakout board with two types of pins
10k pull-up resistor for I2C interface with optional jumper
Easy to integrate
The factory-calibrated temperature range is very wide:-40 ... 125°C for sensor temperature and
-70... 380°C for object temperature.
High precision (medical) calibration in a wide temperature range (both Ta and To of 0.5 and 50°C can reach high accuracy of 0.5°C)
Measurement resolution 0.02°C
Single zone and dual zone version
SMBus compatible digital interface
Customizable PWM output for continuous reading
Simple for 8...16V applications
Sleep mode reduces power consumption
Different packaging options for application and measurement versatility
Automotive grade
Use chip: MLX90614
Power supply: 3-5v (internal low-dropout regulator)
Communication: standard IIC communication protocol
MELEXIS MLX90614ESF-BAA-000-TU-ND non-contact infrared thermometer can be used with or with any microcontroller that can communicate with it through the I2C interface.
The sensor comes with a breakout board which contains all the components required for operation and two types of pins.
They are not soldered. Please indicate if you wish to solder one of them.
The I2C interface has two jumpers, depending on your application, it may or may not need to be soldered, but it is not needed in most cases.
Applications:
High-precision non-contact temperature measurement
Thermal comfort sensor for mobile air conditioning control system
Residential, commercial and industrial building air conditioning temperature sensing element windshield defogging
Car blind angle detection
Industrial temperature control of moving parts
Temperature control in printers and copiers
Household appliances with temperature control
health care
Livestock monitoring
Motion detection
Multi-zone temperature control-up to 127 sensors can be read through a common 2-wire
Thermal relay/alarm
Temperature measurement
Package list:
1 * GY-906 MLX90614ESF sensor module
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Write your review