• -43%

Nincs szín - Alumínium ötvözet 200 kg párhuzamos gerendás terhelésmérő érzékelő elektronikus ezüst

Nincs szín - Alumínium ötvözet 200 kg párhuzamos gerendás terhelésmérő érzékelő elektronikus ezüst

1 148 Ft 43% megtakarítás
2 014 Ft
Nincs adó
Features:
*200kg Load weight sensor,made of high quality and durable.
*Item Condition:100% Brand New
*Material:Aluminum Alloy
*Color: Silver(As Pictures Show)
*Dimensions:18*3.8*2.4cm/5.91’’x1.50’’x0.94’’ (Approx.)
Specifications:
*Comprehensive error: 0.02% F.S
*Sensitivity: 1.0±0.1mv / v
*Nonlinearity: 0.02% F.S
*Hysteresis: 0.02% F.S
*Importance of: 0.02% F.S
*Creep: 0.02% F.S/10min
*Null point Output: 2% F.S
*Input Impedance: 405±10Ω
*Output impedance: 350±3Ω
*Insulation resistance: >=5000M (100VDC)
*Excitation voltage: 5VDC ~ 12VDC
*Temperature compensation range: 10 ~ 40℃
*Operating temperature range: -20 ~ 60℃
*Temperature effect on zero 0.03% F.S/10℃
*Sensitivity temperature effect 0.02% F.S/10℃
*Safe overload 120%
*Ultimate Overload 150%
*Protection class IP65
Use Special Note:
*The sensor is a precision parts, severe vibration, fall, collision, overload, overvoltage, etc. , are very likely to cause permanent damage to the sensor or affect the accuracy and linearity, if you do not necessarily understand the parts, please buy carefully. After all, the resistance and capacitance transistors and other components compared to other electronic components to be more fragile .
*Resistance strain gauge pressure sensor mainly by the elastic body, the resistance strain gauge cable and other components , the internal circuit using Huygens bridge, when the elastic body is deformed under load.
*Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation, its resistance will change ( increase or decrease ), so that the bridge out of balance, a corresponding differential signal for subsequent measurement circuit and handling.
Package Contents
1* Load weight sensor
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow 1-2cm differences due to manual measurement.
3, This listing is for items listed above only, other accessories (if any) are not included.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Aluminum Alloy 200kg Parallel Beam Load Cell Weighing Sensor Electronic Silver
Features:
*200kg Load weight sensor,made of high quality and durable.
*Item Condition:100% Brand New
*Material:Aluminum Alloy
*Color: Silver(As Pictures Show)
*Dimensions:18*3.8*2.4cm/5.91’’x1.50’’x0.94’’ (Approx.)
Specifications:
*Comprehensive error: 0.02% F.S
*Sensitivity: 1.0±0.1mv / v
*Nonlinearity: 0.02% F.S
*Hysteresis: 0.02% F.S
*Importance of: 0.02% F.S
*Creep: 0.02% F.S/10min
*Null point Output: 2% F.S
*Input Impedance: 405±10Ω
*Output impedance: 350±3Ω
*Insulation resistance: >=5000M (100VDC)
*Excitation voltage: 5VDC ~ 12VDC
*Temperature compensation range: 10 ~ 40℃
*Operating temperature range: -20 ~ 60℃
*Temperature effect on zero 0.03% F.S/10℃
*Sensitivity temperature effect 0.02% F.S/10℃
*Safe overload 120%
*Ultimate Overload 150%
*Protection class IP65
Use Special Note:
*The sensor is a precision parts, severe vibration, fall, collision, overload, overvoltage, etc. , are very likely to cause permanent damage to the sensor or affect the accuracy and linearity, if you do not necessarily understand the parts, please buy carefully. After all, the resistance and capacitance transistors and other components compared to other electronic components to be more fragile .
*Resistance strain gauge pressure sensor mainly by the elastic body, the resistance strain gauge cable and other components , the internal circuit using Huygens bridge, when the elastic body is deformed under load.
*Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation, its resistance will change ( increase or decrease ), so that the bridge out of balance, a corresponding differential signal for subsequent measurement circuit and handling.
Package Contents
1* Load weight sensor
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow 1-2cm differences due to manual measurement.
3, This listing is for items listed above only, other accessories (if any) are not included.
402051104448 - shoppingind (24)
402051104448

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - Alumínium ötvözet 200 kg párhuzamos gerendás terhelésmérő érzékelő elektronikus ezüst

Features:
*200kg Load weight sensor,made of high quality and durable.
*Item Condition:100% Brand New
*Material:Aluminum Alloy
*Color: Silver(As Pictures Show)
*Dimensions:18*3.8*2.4cm/5.91’’x1.50’’x0.94’’ (Approx.)
Specifications:
*Comprehensive error: 0.02% F.S
*Sensitivity: 1.0±0.1mv / v
*Nonlinearity: 0.02% F.S
*Hysteresis: 0.02% F.S
*Importance of: 0.02% F.S
*Creep: 0.02% F.S/10min
*Null point Output: 2% F.S
*Input Impedance: 405±10Ω
*Output impedance: 350±3Ω
*Insulation resistance: >=5000M (100VDC)
*Excitation voltage: 5VDC ~ 12VDC
*Temperature compensation range: 10 ~ 40℃
*Operating temperature range: -20 ~ 60℃
*Temperature effect on zero 0.03% F.S/10℃
*Sensitivity temperature effect 0.02% F.S/10℃
*Safe overload 120%
*Ultimate Overload 150%
*Protection class IP65
Use Special Note:
*The sensor is a precision parts, severe vibration, fall, collision, overload, overvoltage, etc. , are very likely to cause permanent damage to the sensor or affect the accuracy and linearity, if you do not necessarily understand the parts, please buy carefully. After all, the resistance and capacitance transistors and other components compared to other electronic components to be more fragile .
*Resistance strain gauge pressure sensor mainly by the elastic body, the resistance strain gauge cable and other components , the internal circuit using Huygens bridge, when the elastic body is deformed under load.
*Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation, its resistance will change ( increase or decrease ), so that the bridge out of balance, a corresponding differential signal for subsequent measurement circuit and handling.
Package Contents
1* Load weight sensor
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow 1-2cm differences due to manual measurement.
3, This listing is for items listed above only, other accessories (if any) are not included.

Write your review