A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Stays Open Photoelectric Proximity Sensor Proximity Switch for Factory Family
Features:
Photoelectric Switch uses the blocking or reflection of the detected object to the beam, to detect the existence of the object.
Photoelectric Switch converts the input current into a light signal on the transmitter, and the receiver detects the target object according to the strength or of the received light.
Objects are not limited to metal, and all objects that reflect light (or block light) can be detected.
The switch stays open, and closes when it detects the object in detection range.
High , quick response, strong anti-interference capability.
Specification:
Model: E3F-DS30C4
Detection Range: 10-30cm, ±10%
Detection Range Adjustment: sensitivity regulator
Detection Target: transparent/opaque object
Response Time: 1ms
On-delay: 1.5ms
Light Source: infrared light 660nm
Supply Voltage: DC12-24V(6-36V) impulse (P-P) <10%
Withstand Voltage: AC1000V 50/60Hz 1min, between charging part and housing
Voltage Influence: ±10% detection distance (within ±15% of rated supply voltage range)
Current Consumption: N.P type: <20mA, A type: <1.7mA
Control Output: N.P type: <300mA, A type: <400mA, J type: <2A Contact Life: 100,000 times
Circuit Protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection; A type: surge absorption
Operation Environment: -30~65°C (no freezing, no condensation), 35-95% RH
Temperature Influence: temperature range -30~65°C, at 23°C: ±15% detection distance; temperature range: -25~60 ° C, at 23 ° C: ± 10% detection distance
Insulation Impedance: >50MΩ (DC500 megohmmeter), between charging part and housing
Housing Material: ABS
Detection (lens): PMMA
Weight: 65g (approx.)
Package List:
1 x Photoelectric Switch
274527132831 - globes (17)