• -40%

Nincs szín - XY-PWM jelgenerátor modul állítható impulzus frekvencia ciklus kijelző Y8W0

Nincs szín - XY-PWM jelgenerátor modul állítható impulzus frekvencia ciklus kijelző Y8W0

403 Ft 40% megtakarítás
672 Ft
Nincs adó
Description:
Instructions:1.High-quality ABS material and precision circuit board, wear-resistant, not easy to damage and deformation, with LCD LCD display frequency and duty cycle, very clear, PWM output can set frequency and duty cycle separately; wide frequency range, high precision; serial port Communication
2.Used as a square wave signal generator to generate square wave signals for experimental development; to generate square wave signals for controlling motor drivers; to generate adjustable pulses for use by MCUs; to generate adjustable pulses, to control related circuits (PWM dimming) Speed and other applications)
3.The module has 4 independent buttons for setting the frequency and duty cycle. It supports short press (increase or decrease one unit) and long press (fast increase or decrease). It is very simple. The parameters are automatically saved after setting. Lost.
1.Description:XY-PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels.It is used as a signal source or excitation source for testing.Widely used in production practice and technology.
2.Features:1.With outer casing;
2.LCD high definition display;
3.Support UART;
4.Support frequency adjustment;
5.Support duty cycle adjustment;
6.High precision detection;
7.Support power-down memory function;
8.1-Channel PWM output.
3.Parameters:1.Product name: PWM Signal Generator;
2.Model: XY-PWM;
3.Work voltage: DC 3.3V-30V;
4.Frequency range:1Hz150KHz;
5.Frequency accuracy:2% ;
6.Duty cycle range:0.00% -100% ;
7.Output Current:About 5-30mA;
8.Output amplitude:Same to input voltage;
9.Size:79*43*27mm;
10.Operating temperature:-20℃70℃;
4.Frequency set range:Enter the settings interface when short press any button FREQ or FREQ- in the normal running status to select frequency range.Automatically switch frequency range.
Pay attention to the position where the decimal point moves when the button is pressed.
Display XXX.No decimal point,The minimum frequency is 1Hz.The frequency range is 1Hz 999Hz.
Display X.XX.The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz 9.99KHz.
Display XX.X.The decimal point is the third last,The minimum frequency is 0.1KHz.The frequency range is 10.0KHz 99.9KHz.
Display X.X.X.The decimal point is fully lit,The minimum frequency is 1KHz.The frequency range is 1KHz 150KHz.
For example:Display 100 means PWM output frequency is 100Hz;
Display 1.01 means PWM output frequency is 1.01KHz;
Display 54.1 means PWM output frequency is 54.1KHz;
Display 1.2.4 means PWM output frequency is 124KHz;
5.Duty cycle set range:Enter the settings interface when short press any button DUTY or DUTY- in the normal running status to select duty cycle.Automatically switch frequency range.
Duty cycle range is 0.00% -100% .
6.Use steps:1.Connect to power supply;
2.Short or long press button FREQ or FREQ- to set frequency;
3.Short or long press button DUTY or DUTY- to set duty cycle;
4.Connect to load.
7.UART communication and parameter settings
The system supports UART data upload and parameter setting functions (TTL level);
UART: 9600, 8, 1
1.Set PWM frequency:F101:Set frequency is 101Hz.101 can by replace by 001999;
F1.05:Set frequency is 1.05KHz.1.05 can by replace by 1.009.99;
F10.5:Set frequency is 10.5KHz.10.5 can by replace by 10.099.9;
F1.0.5:Set frequency is 105KHz.1.0.5 can by replace by 1.0.01.5.0;
2.Set PWM duty cycle:DXXX:Set duty cycle is XXX. XXX can be 000-100.
E.g:D051 means PWN duty cycle is be set as 51% .
3.Read set parameter:Send read and then get parameter.
4.Return value:Return DOWN:Set success.
Return FALL:Set fail.
8.Application:1.Square wave signal generator, generating square wave signal for experimental development;
2.Used to generate a square wave signal that controls the motor driver;
3.Generate adjustable pulses for use by the MCU;
4.Dimmer;
5.Speed governor;
Package Included:1 X XY-PWM PWM Signal Generator
Preview:
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
XY-PWM Signal Generator Module Adjustable Pulse Frequency Cycle Display Y8W0
Description:
Instructions:1.High-quality ABS material and precision circuit board, wear-resistant, not easy to damage and deformation, with LCD LCD display frequency and duty cycle, very clear, PWM output can set frequency and duty cycle separately; wide frequency range, high precision; serial port Communication
2.Used as a square wave signal generator to generate square wave signals for experimental development; to generate square wave signals for controlling motor drivers; to generate adjustable pulses for use by MCUs; to generate adjustable pulses, to control related circuits (PWM dimming) Speed and other applications)
3.The module has 4 independent buttons for setting the frequency and duty cycle. It supports short press (increase or decrease one unit) and long press (fast increase or decrease). It is very simple. The parameters are automatically saved after setting. Lost.
1.Description:XY-PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels.It is used as a signal source or excitation source for testing.Widely used in production practice and technology.
2.Features:1.With outer casing;
2.LCD high definition display;
3.Support UART;
4.Support frequency adjustment;
5.Support duty cycle adjustment;
6.High precision detection;
7.Support power-down memory function;
8.1-Channel PWM output.
3.Parameters:1.Product name: PWM Signal Generator;
2.Model: XY-PWM;
3.Work voltage: DC 3.3V-30V;
4.Frequency range:1Hz150KHz;
5.Frequency accuracy:2% ;
6.Duty cycle range:0.00% -100% ;
7.Output Current:About 5-30mA;
8.Output amplitude:Same to input voltage;
9.Size:79*43*27mm;
10.Operating temperature:-20℃70℃;
4.Frequency set range:Enter the settings interface when short press any button FREQ or FREQ- in the normal running status to select frequency range.Automatically switch frequency range.
Pay attention to the position where the decimal point moves when the button is pressed.
Display XXX.No decimal point,The minimum frequency is 1Hz.The frequency range is 1Hz 999Hz.
Display X.XX.The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz 9.99KHz.
Display XX.X.The decimal point is the third last,The minimum frequency is 0.1KHz.The frequency range is 10.0KHz 99.9KHz.
Display X.X.X.The decimal point is fully lit,The minimum frequency is 1KHz.The frequency range is 1KHz 150KHz.
For example:Display 100 means PWM output frequency is 100Hz;
Display 1.01 means PWM output frequency is 1.01KHz;
Display 54.1 means PWM output frequency is 54.1KHz;
Display 1.2.4 means PWM output frequency is 124KHz;
5.Duty cycle set range:Enter the settings interface when short press any button DUTY or DUTY- in the normal running status to select duty cycle.Automatically switch frequency range.
Duty cycle range is 0.00% -100% .
6.Use steps:1.Connect to power supply;
2.Short or long press button FREQ or FREQ- to set frequency;
3.Short or long press button DUTY or DUTY- to set duty cycle;
4.Connect to load.
7.UART communication and parameter settings
The system supports UART data upload and parameter setting functions (TTL level);
UART: 9600, 8, 1
1.Set PWM frequency:F101:Set frequency is 101Hz.101 can by replace by 001999;
F1.05:Set frequency is 1.05KHz.1.05 can by replace by 1.009.99;
F10.5:Set frequency is 10.5KHz.10.5 can by replace by 10.099.9;
F1.0.5:Set frequency is 105KHz.1.0.5 can by replace by 1.0.01.5.0;
2.Set PWM duty cycle:DXXX:Set duty cycle is XXX. XXX can be 000-100.
E.g:D051 means PWN duty cycle is be set as 51% .
3.Read set parameter:Send read and then get parameter.
4.Return value:Return DOWN:Set success.
Return FALL:Set fail.
8.Application:1.Square wave signal generator, generating square wave signal for experimental development;
2.Used to generate a square wave signal that controls the motor driver;
3.Generate adjustable pulses for use by the MCU;
4.Dimmer;
5.Speed governor;
Package Included:1 X XY-PWM PWM Signal Generator
Preview:
402637800549 - urukz (37)
402637800549

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - XY-PWM jelgenerátor modul állítható impulzus frekvencia ciklus kijelző Y8W0

Description:
Instructions:1.High-quality ABS material and precision circuit board, wear-resistant, not easy to damage and deformation, with LCD LCD display frequency and duty cycle, very clear, PWM output can set frequency and duty cycle separately; wide frequency range, high precision; serial port Communication
2.Used as a square wave signal generator to generate square wave signals for experimental development; to generate square wave signals for controlling motor drivers; to generate adjustable pulses for use by MCUs; to generate adjustable pulses, to control related circuits (PWM dimming) Speed and other applications)
3.The module has 4 independent buttons for setting the frequency and duty cycle. It supports short press (increase or decrease one unit) and long press (fast increase or decrease). It is very simple. The parameters are automatically saved after setting. Lost.
1.Description:XY-PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels.It is used as a signal source or excitation source for testing.Widely used in production practice and technology.
2.Features:1.With outer casing;
2.LCD high definition display;
3.Support UART;
4.Support frequency adjustment;
5.Support duty cycle adjustment;
6.High precision detection;
7.Support power-down memory function;
8.1-Channel PWM output.
3.Parameters:1.Product name: PWM Signal Generator;
2.Model: XY-PWM;
3.Work voltage: DC 3.3V-30V;
4.Frequency range:1Hz150KHz;
5.Frequency accuracy:2% ;
6.Duty cycle range:0.00% -100% ;
7.Output Current:About 5-30mA;
8.Output amplitude:Same to input voltage;
9.Size:79*43*27mm;
10.Operating temperature:-20℃70℃;
4.Frequency set range:Enter the settings interface when short press any button FREQ or FREQ- in the normal running status to select frequency range.Automatically switch frequency range.
Pay attention to the position where the decimal point moves when the button is pressed.
Display XXX.No decimal point,The minimum frequency is 1Hz.The frequency range is 1Hz 999Hz.
Display X.XX.The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz 9.99KHz.
Display XX.X.The decimal point is the third last,The minimum frequency is 0.1KHz.The frequency range is 10.0KHz 99.9KHz.
Display X.X.X.The decimal point is fully lit,The minimum frequency is 1KHz.The frequency range is 1KHz 150KHz.
For example:Display 100 means PWM output frequency is 100Hz;
Display 1.01 means PWM output frequency is 1.01KHz;
Display 54.1 means PWM output frequency is 54.1KHz;
Display 1.2.4 means PWM output frequency is 124KHz;
5.Duty cycle set range:Enter the settings interface when short press any button DUTY or DUTY- in the normal running status to select duty cycle.Automatically switch frequency range.
Duty cycle range is 0.00% -100% .
6.Use steps:1.Connect to power supply;
2.Short or long press button FREQ or FREQ- to set frequency;
3.Short or long press button DUTY or DUTY- to set duty cycle;
4.Connect to load.
7.UART communication and parameter settings
The system supports UART data upload and parameter setting functions (TTL level);
UART: 9600, 8, 1
1.Set PWM frequency:F101:Set frequency is 101Hz.101 can by replace by 001999;
F1.05:Set frequency is 1.05KHz.1.05 can by replace by 1.009.99;
F10.5:Set frequency is 10.5KHz.10.5 can by replace by 10.099.9;
F1.0.5:Set frequency is 105KHz.1.0.5 can by replace by 1.0.01.5.0;
2.Set PWM duty cycle:DXXX:Set duty cycle is XXX. XXX can be 000-100.
E.g:D051 means PWN duty cycle is be set as 51% .
3.Read set parameter:Send read and then get parameter.
4.Return value:Return DOWN:Set success.
Return FALL:Set fail.
8.Application:1.Square wave signal generator, generating square wave signal for experimental development;
2.Used to generate a square wave signal that controls the motor driver;
3.Generate adjustable pulses for use by the MCU;
4.Dimmer;
5.Speed governor;
Package Included:1 X XY-PWM PWM Signal Generator
Preview:

Write your review