• -43%

Nincs szín - Modulok Hőmérséklet-szabályozó mérése Mikrokomputer-kapcsoló megbízható

Nincs szín - Modulok Hőmérséklet-szabályozó mérése Mikrokomputer-kapcsoló megbízható

370 Ft 43% megtakarítás
649 Ft
Nincs adó
Modules Temperature Controller Measurement Microcomputer Switch Reliable
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 12V digital LED microcomputer thermostat controller switch temperature sensor
* High temperature protection.
* Temperature Measurement Range: -50degree Celsius ~ 110degree Celsius
* Resolution: -9.9-99.9
* 0.1degree Celsius for other temperature ranges 1degree Celsius
* Accuracy: ± 0.1degree Celsius
* Control Accuracy: 0.1degree Celsius
* Backlash Accuracy: 0.1degree Celsius
* Refresh Rate: 0.5S
* High Temperature Protection: 0-110degree Celsius
* Input Voltage: DC 12V
* Measurement Input: NTC (10K0.5% ) Waterproof Sensor
* Input: 1 10A Relay
* Environmental Requirements: -10degree Celsius--60degree Celsius humidity 20% -85%
* Size(L*W*D): 48mm * 29mm * : 32mm(Approx.)
* Opening Size: 46 * 26.5mm(Approx.)
* Power Consumption: Quiescent Current ≤35MA Pull Current: ≤65MA
Installation:
* Connect the power supply and the load power supply to the controller, this time it will be displayed in red above the measured temperature, and the required set temperature will be displayed below the blue (also displayed in red). ) Set the required temperature, etc. It will automatically return to confirmation within 3 seconds after setting. At this time, the controller will automatically shut down by the relay, and the temperature controller will output a 10A relay to adapt to various high-power loads and ensure correct wiring.
* LED, LED status description.
* LED: Off means the relay is off, and always means the relay is off.
* Digital tube: The measurement range of the HH LL sensor is turned on, because the thermostat will be forced to close the relay display --- high temperature protection.
Package Contents:
1 * Temperature Controller
1 * Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Modules Temperature Controller Measurement Microcomputer Switch Reliable
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 12V digital LED microcomputer thermostat controller switch temperature sensor
* High temperature protection.
* Temperature Measurement Range: -50degree Celsius ~ 110degree Celsius
* Resolution: -9.9-99.9
* 0.1degree Celsius for other temperature ranges 1degree Celsius
* Accuracy: ± 0.1degree Celsius
* Control Accuracy: 0.1degree Celsius
* Backlash Accuracy: 0.1degree Celsius
* Refresh Rate: 0.5S
* High Temperature Protection: 0-110degree Celsius
* Input Voltage: DC 12V
* Measurement Input: NTC (10K0.5% ) Waterproof Sensor
* Input: 1 10A Relay
* Environmental Requirements: -10degree Celsius--60degree Celsius humidity 20% -85%
* Size(L*W*D): 48mm * 29mm * : 32mm(Approx.)
* Opening Size: 46 * 26.5mm(Approx.)
* Power Consumption: Quiescent Current ≤35MA Pull Current: ≤65MA
Installation:
* Connect the power supply and the load power supply to the controller, this time it will be displayed in red above the measured temperature, and the required set temperature will be displayed below the blue (also displayed in red). ) Set the required temperature, etc. It will automatically return to confirmation within 3 seconds after setting. At this time, the controller will automatically shut down by the relay, and the temperature controller will output a 10A relay to adapt to various high-power loads and ensure correct wiring.
* LED, LED status description.
* LED: Off means the relay is off, and always means the relay is off.
* Digital tube: The measurement range of the HH LL sensor is turned on, because the thermostat will be forced to close the relay display --- high temperature protection.
Package Contents:
1 * Temperature Controller
1 * Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
402520394249 - shoppingind (24)
402520394249

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - Modulok Hőmérséklet-szabályozó mérése Mikrokomputer-kapcsoló megbízható

Modules Temperature Controller Measurement Microcomputer Switch Reliable
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 12V digital LED microcomputer thermostat controller switch temperature sensor
* High temperature protection.
* Temperature Measurement Range: -50degree Celsius ~ 110degree Celsius
* Resolution: -9.9-99.9
* 0.1degree Celsius for other temperature ranges 1degree Celsius
* Accuracy: ± 0.1degree Celsius
* Control Accuracy: 0.1degree Celsius
* Backlash Accuracy: 0.1degree Celsius
* Refresh Rate: 0.5S
* High Temperature Protection: 0-110degree Celsius
* Input Voltage: DC 12V
* Measurement Input: NTC (10K0.5% ) Waterproof Sensor
* Input: 1 10A Relay
* Environmental Requirements: -10degree Celsius--60degree Celsius humidity 20% -85%
* Size(L*W*D): 48mm * 29mm * : 32mm(Approx.)
* Opening Size: 46 * 26.5mm(Approx.)
* Power Consumption: Quiescent Current ≤35MA Pull Current: ≤65MA
Installation:
* Connect the power supply and the load power supply to the controller, this time it will be displayed in red above the measured temperature, and the required set temperature will be displayed below the blue (also displayed in red). ) Set the required temperature, etc. It will automatically return to confirmation within 3 seconds after setting. At this time, the controller will automatically shut down by the relay, and the temperature controller will output a 10A relay to adapt to various high-power loads and ensure correct wiring.
* LED, LED status description.
* LED: Off means the relay is off, and always means the relay is off.
* Digital tube: The measurement range of the HH LL sensor is turned on, because the thermostat will be forced to close the relay display --- high temperature protection.
Package Contents:
1 * Temperature Controller
1 * Probe
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Write your review