- -43%
Nincs szín - AC 220V 3/4 \\ " NC elektromos mágnesszelep cinkötvözet testű elektromos mágneses szelep
Nincs szín - AC 220V 3/4 \\ " NC elektromos mágnesszelep cinkötvözet testű elektromos mágneses szelep
1 663 Ft
43% megtakarítás
2 917 Ft
Nincs adó
Description:
If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 220V AC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
Features:
This is a normally close type electric solenoid valve, power on to open it and power off to close it.
The high quality zinc alloy valve body would hold a press up to 0.8Mpa and liquid temperature from -5â„ to 100â„.
Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water.
Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes.
There is an sign on valve showing flow direction, please follow the sign to connect pipes.
Specifications:
Valve Body: Zinc alloy
Input Voltage: AC220V
Power: 16W
Type: NC(Normally Close)
Pressure: 0-0.8Mpa
Thread Size: 3/4" BSPP (DN20)
Flow Orifice: 20mm
Liquid Temperature: -5â„~100â„
Suitable for: Non-corrosive oil, water, gas, etc
Package Includes:
1 x Solenoid Valve
If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 220V AC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
Features:
This is a normally close type electric solenoid valve, power on to open it and power off to close it.
The high quality zinc alloy valve body would hold a press up to 0.8Mpa and liquid temperature from -5â„ to 100â„.
Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications.
This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water.
Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes.
There is an sign on valve showing flow direction, please follow the sign to connect pipes.
Specifications:
Valve Body: Zinc alloy
Input Voltage: AC220V
Power: 16W
Type: NC(Normally Close)
Pressure: 0-0.8Mpa
Thread Size: 3/4" BSPP (DN20)
Flow Orifice: 20mm
Liquid Temperature: -5â„~100â„
Suitable for: Non-corrosive oil, water, gas, etc
Package Includes:
1 x Solenoid Valve
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
