- -43%
Szín: 47 az 1-ben szürke készlet - Új, 2022-es vákuumlézeres szinttartó lítium elemmel a Cross Lines Laser Level 360
Szín: 47 az 1-ben szürke készlet - Új, 2022-es vákuumlézeres szinttartó lítium elemmel a Cross Lines Laser Level 360
2 244 Ft
43% megtakarítás
3 936 Ft
Nincs adó
Specification:
Name: Lithium Wireless Vacuum Wall Laser Level Bracket
Working temperature: -10 to 40 Celsius
Working time: 3-4 hours
Battery: 2400mAh
Working Environment: Indoor/Outdoor
Adsorption Monitoring, Fall Prevention
The red light flashes, and the sound of "DI DI DI DI" is emitted, indicating that the battery is insufficient
When using the support, please pay attention to check the power to avoid falling and damaging the machine due to power failure.
Operation steps:
① First, install the battery on the card slot of the machine
② Turn on the machine switch and the red button lights up, indicating that the power is on
③ Press the machine firmly on the position to be fixed (a flat surface shall be selected for the fixed position), open the yellow button in the middle of the machine (do not close the yellow button when using), and release the hand after the machine is fixed.
④ After the machine is used, press the "E" key to remove the adsorption, and then the support can be removed
Name: Lithium Wireless Vacuum Wall Laser Level Bracket
Working temperature: -10 to 40 Celsius
Working time: 3-4 hours
Battery: 2400mAh
Working Environment: Indoor/Outdoor
Adsorption Monitoring, Fall Prevention
The red light flashes, and the sound of "DI DI DI DI" is emitted, indicating that the battery is insufficient
When using the support, please pay attention to check the power to avoid falling and damaging the machine due to power failure.
Operation steps:
① First, install the battery on the card slot of the machine
② Turn on the machine switch and the red button lights up, indicating that the power is on
③ Press the machine firmly on the position to be fixed (a flat surface shall be selected for the fixed position), open the yellow button in the middle of the machine (do not close the yellow button when using), and release the hand after the machine is fixed.
④ After the machine is used, press the "E" key to remove the adsorption, and then the support can be removed
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
