• -43%

Szín: 1 Chanel-Short - KY-019 Optocsatoló relémodullal DC 5V kimenet 1/2/4/6/8 utas teljesítményrelé modul 250VAC/125VAC

Szín: 1 Chanel-Short - KY-019 Optocsatoló relémodullal DC 5V kimenet 1/2/4/6/8 utas teljesítményrelé modul 250VAC/125VAC

100 Ft 43% megtakarítás
175 Ft
Nincs adó
Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.
Mennyiség
Add to Compare
Add to Wishlist

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
KY-019 Optocsatoló relémodullal DC 5V kimenet 1/2/4/6/8 utas teljesítményrelé modul 250VAC/125VAC 10A tábla árnyékolás Arduinohoz
KY-019 With Optocoupler Relay Module DC 5V Output 1/2/4/6/8 Way Power Relays Module 250VAC/125VAC 10A Board Shield For Arduino
Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.
1005002931574205/2 - eiechip
1005002931574205/2

Hasonló kategóriák mint 16 :

Reviews

Write your review

Write your review

Szín: 1 Chanel-Short - KY-019 Optocsatoló relémodullal DC 5V kimenet 1/2/4/6/8 utas teljesítményrelé modul 250VAC/125VAC

Output drive capability: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved; the input is directly connected to the single-chip IO port or digital circuit, Input high level relay to pull in, input low level relay to release; working voltage 5V, suction
The combined current is about 70mA per channel, with a relay status indicator; full SMD components, reasonable drive circuit design, using 8050 transistors to drive the relay action; fixed screw holes are provided for easy installation.
Simple test instructions: The module input and output are electrically insulated. After the correct voltage is supplied, you only need to connect a high level (such as a short circuit with VCC) to the input pin to make the relay pull in, not connected or connected to a low level (Such as short-circuit with GND) The relay does not operate.

Write your review