- -43%
Szín: 4PINS-5V - AMS1117 3.3V / 5V DC-DC Step-Down tápegység modul AMS1117-5.0V Power Buck modul AMS1117-3.3V LDO 800MA
Szín: 4PINS-5V - AMS1117 3.3V / 5V DC-DC Step-Down tápegység modul AMS1117-5.0V Power Buck modul AMS1117-3.3V LDO 800MA
105 Ft
43% megtakarítás
185 Ft
Nincs adó
Product description
AMS117-3.3 4PINS Module
AMS1117-3.3 chip
1 Input : DC 4.5V--7V ( input voltage must be higher than the output voltage to 1V or more. )
2 Output : 3.3V, 800mA ( load current must not exceed 800ma)
3 pairs of panel design, layout nice ;
4 specially designed two pin mounting holes , can be directly fixed on hole board for extended experiments ;
5 input and output using 2P single row pin for easy connection ;
6 PCB board size : 2.5cm * 1.1cm
7 with power indicator light ( red )
8 tablet weight about : 1.6g
AMS117-5.0 4PINS Module
AMS1117-5.0 chip
1 Input : DC 6V - 12V ( input voltage must be higher than the output voltage to 1V or more. )
2 Output : 5.0V ( -0.05v error ), 800mA ( load current must not exceed 800ma)
Three pairs of panel design, layout nice ;
4 specially designed two pin mounting holes , can be directly fixed on hole board for extended experiments ;
5 input and output using 2P single row pin for easy connection ;
6 PCB board size : 2.5cm * 1.1cm
7 with power indicator light ( red )
AMS117-3.3 3PINS Module
Size:8.6mm x 12.33mm
Input voltage: For DC 4.2 V-10 V
Output: 3.3 V, 800 mA
AMS117-3.3 3PINS Module
Size:8.6mm x 12.33mm
Input voltage: For DC 6.5 V-12 V
Output: 5 V, 800 mA
Kindly note:
1.Boost modules or buck module indicate the operating voltage, Please donot exceed operating voltage , or it will be damaged easily !
2.Boost module output voltage can only be greater than or equal to input voltage, cannot be less than the input voltage!
3.Buck module input voltage must be higher than output voltage of 1.5V or 2V, otherwise it can not output enough power!
4.Automatic Adjustable Boost or Buck module has start voltage and limit working voltage, Please do not exceed them , or it will be damaged easily !
5.Cannot reverse polarity , or it will be short circuit, or will be burnt easily !
AMS117-3.3 4PINS Module
AMS1117-3.3 chip
1 Input : DC 4.5V--7V ( input voltage must be higher than the output voltage to 1V or more. )
2 Output : 3.3V, 800mA ( load current must not exceed 800ma)
3 pairs of panel design, layout nice ;
4 specially designed two pin mounting holes , can be directly fixed on hole board for extended experiments ;
5 input and output using 2P single row pin for easy connection ;
6 PCB board size : 2.5cm * 1.1cm
7 with power indicator light ( red )
8 tablet weight about : 1.6g
AMS117-5.0 4PINS Module
AMS1117-5.0 chip
1 Input : DC 6V - 12V ( input voltage must be higher than the output voltage to 1V or more. )
2 Output : 5.0V ( -0.05v error ), 800mA ( load current must not exceed 800ma)
Three pairs of panel design, layout nice ;
4 specially designed two pin mounting holes , can be directly fixed on hole board for extended experiments ;
5 input and output using 2P single row pin for easy connection ;
6 PCB board size : 2.5cm * 1.1cm
7 with power indicator light ( red )
AMS117-3.3 3PINS Module
Size:8.6mm x 12.33mm
Input voltage: For DC 4.2 V-10 V
Output: 3.3 V, 800 mA
AMS117-3.3 3PINS Module
Size:8.6mm x 12.33mm
Input voltage: For DC 6.5 V-12 V
Output: 5 V, 800 mA
Kindly note:
1.Boost modules or buck module indicate the operating voltage, Please donot exceed operating voltage , or it will be damaged easily !
2.Boost module output voltage can only be greater than or equal to input voltage, cannot be less than the input voltage!
3.Buck module input voltage must be higher than output voltage of 1.5V or 2V, otherwise it can not output enough power!
4.Automatic Adjustable Boost or Buck module has start voltage and limit working voltage, Please do not exceed them , or it will be damaged easily !
5.Cannot reverse polarity , or it will be short circuit, or will be burnt easily !
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
