- -43%
1 db JDY-23 Bluetooth 5.0 modul BLE5.0 Bluetooth átlátszó átvitel Bluetooth digitális átvitel CC2541
1 db JDY-23 Bluetooth 5.0 modul BLE5.0 Bluetooth átlátszó átvitel Bluetooth digitális átvitel CC2541
164 Ft
43% megtakarítás
287 Ft
Nincs adó
Product Introduction
JDY-23 transparent transmission module is based on Bluetooth 5.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 4db, maximum transmission distance is 60 meters, adopts imported original chip design, supports users to modify equipment through AT command Instructions such as name and baud rate are convenient and quick to use.
The JDY-23 Bluetooth module can realize module and mobile phone data transmission. By default, BLE Bluetooth can be used for product application without configuration.
Make BLE faster and easier to use in products
Module Parameter Details
JDY-23 product parameters
model
JDY-23
Working frequency
2.4G
Transmit power
4db(maximum)
Communication Interface
UART
Operating Voltage
1.8V - 3.6V
Operating temperature
-40° - 80°
antenna
Built-in PCB antenna
Receiving sensitivity
-97dbm
Transmission distance
60 meter
Master-slave support
Slave
Module size
19.6 * 14.94 *1.8 mm(Length, width and height)
Bluetooth version
BLE 5.0(Compatible with BLE4.0, BLE4.2)
Awakening state current
800uA(Broadcast)
Light sleep state current
<50uA (Broadcast)
Deep sleep current
9uA (No broadcast)
Instruction parameter saving
Parameter configuration power-down data is saved
SMT soldering temperature
<260°
rf-TX/RX peak current
5mA
JDY-23 transparent transmission module is based on Bluetooth 5.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 4db, maximum transmission distance is 60 meters, adopts imported original chip design, supports users to modify equipment through AT command Instructions such as name and baud rate are convenient and quick to use.
The JDY-23 Bluetooth module can realize module and mobile phone data transmission. By default, BLE Bluetooth can be used for product application without configuration.
Make BLE faster and easier to use in products
Module Parameter Details
JDY-23 product parameters
model
JDY-23
Working frequency
2.4G
Transmit power
4db(maximum)
Communication Interface
UART
Operating Voltage
1.8V - 3.6V
Operating temperature
-40° - 80°
antenna
Built-in PCB antenna
Receiving sensitivity
-97dbm
Transmission distance
60 meter
Master-slave support
Slave
Module size
19.6 * 14.94 *1.8 mm(Length, width and height)
Bluetooth version
BLE 5.0(Compatible with BLE4.0, BLE4.2)
Awakening state current
800uA(Broadcast)
Light sleep state current
<50uA (Broadcast)
Deep sleep current
9uA (No broadcast)
Instruction parameter saving
Parameter configuration power-down data is saved
SMT soldering temperature
<260°
rf-TX/RX peak current
5mA
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek