A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
8 16 csatorna ENC28J60 28J60 W5100 RJ45 Hálózat Web Relé vezérlőkapcsoló Internet Menedzsment P2P WIFI Router vezérlő relé modul
8 16 Channel ENC28J60 28J60 W5100 RJ45 Network Web Relay Control Switch Internet Management P2P WIFI Router Control Relay Module
Product Description
The 16-channel network module is a network-based relay control module based on a 32-bit system. The module can use the Internet or an internal router to control the relay module, thereby completely remotely controlling the electrical switch and achieving the purpose of centralized power management. It can be set directly through IE browser and controls.

application:
Home decoration, hotels, shopping malls, factories, cafes, karaoke timer management, daily office, store monitoring, physical network, industrial control equipment, test equipment power control, unattended, underground pipelines, mining equipment, ships, air station rooms ,, Intelligent management and centralized management.

notes:
When connecting the high-voltage power supply module, please pay attention to the wiring to prevent equipment damage caused by short circuit!

Technical specifications:
External power supply voltage: 5.5V DC 2A max
2. Accessible: 16
3. Electronic switch life: 100,000 times
Working temperature: -30~85℃.
5. Size: 47 * 48 * 20mm

illustrate:
1. Set IP in Internet properties
2. The default IP 192.168.1.4 port: 30000
Open the browser and enter http://192.168.1.4/30000. Input control interface
3. Relay control HTTP commands:
Relay 1-8Bit command:
http: // IP / Port / 00: Relay-01 OFF
http: // IP / port / 01: relay-01 ON
http: // IP / port / 02: Relay-O2 OFF
http: // IP / Port / 03: Relay-02 ON
http: // IP / Port / 04: Relay-03 OFF
http: // IP / Port / 05: Relay-03 ON
http: // IP / Port / 06: Relay-04 OFF
http: // IP / Port / 07: Relay-04 ON
http: // IP / Port / 08: Relay-05 OFF
http: // IP / Port / 09: Relay-05 ON
http: // IP / port / 10: Relay-06 OFF
http: // IP / port / 11: Relay-06 ON
http: // IP / port / 12: Relay-07 OFF
http: // IP / port / 13: Relay-07 ON
http: // IP / port / 14: Relay-08 OFF
http: // IP / Port / 15: Relay-08 ON

Relay 9-16Bit command:
http: //IP/port/16: Relay 09 is off
http: //IP/port/17: Relay-09 ON
http: //IP/port/18: Relay -10 is off
http: //IP/port/19: Relay-10 ON
http: //IP/port/20: Relay 11 is off
http: //IP/Port/21: Relay-11 ON
http: //IP/port/22: Relay 12 is off
http: //IP/port/23: Relay-12 ON
http: //IP/port/24: Relay 13 is off
http: //IP/Port/25: Relay 13 ON
http: //IP/port/26: Relay 14 is off
http: //IP/port/27: Relay 14 ON
http: //IP/port/28: Relay-15 is off
http: //IP/port/29: Relay -15 ON
http: //IP/port/30: Relay 16 is off
http: //IP/Port/31: Relay 16 ON

View relay status command
http://IP/Port/99:16 ACSII feeds back the current I/O status. MSB is used for the first bit and LSB is used for the 16th bit.
E.g: Returning 1111000011110000 means that relays 1-4 are ON, relays 5-8 are OFF, relays 9-12 are ON, and relays 13-16 are OFF.

Modify IP
http: // IP / Port / 41: When modifying the IP, Relay-01 cannot be 0, Relay-01? 04 cannot be greater than 255. Port cannot be 0.

reset
When you short press the button, the LED will flash once.
Long press the button, don't let go, until the LED lights up. Then release the button and the LED will go out. It said it was a factory reset. IP 192.168.1.4 and port 30000
1005003228672880/2 - pngto