- -43%
Micro USB relé modul 5 V 4 csatornás relé modul relé vezérlőpanel kijelzővel 4 utas relé kimenet USB interfésszel
Micro USB relé modul 5 V 4 csatornás relé modul relé vezérlőpanel kijelzővel 4 utas relé kimenet USB interfésszel
472 Ft
43% megtakarítás
828 Ft
Nincs adó
Product Description
1.The module have MICRO USB and serial port , so they can communicate with PC and other device conveniently.
2.The normal working voltage for modules is 5V.And module of ICSE014A have a power interface of 5V. Parameters are as follows:
ICSE012A ICSE013A ICSE014A Unit Remark
CC 4 2 8 channel countof module
I 400 250 700 mA working current
U 5 5 5 V input voltage
√ √ √ whether have serial port
9600 9600 9600 bit/s baud rate ofserialport
F 1000 1000 1000 Hz Module control frequency
× × √ Whether have power
Interface:
Modules all have Micro USB and serial port . Read following for details:
1.Micro USB: Standard micro USB mother mouth.
2.TX : Transmit
3.RX : Receive
4.5V : Volt current condenser
5.GND : Ground
6.Power Interface : Only ICSE014A have . Interface is used when Micro USB cannot give enough power.
Usage method:
USB usage method
Module connect with PC through USB . The connection method is as follows:
1.Then open ”Relay Board Manager” to operate the module . Read ” RelayBoardManager_Reference” for details of the software.
Serial port usage method
Module can communicate with other device directly through serial port .
Module can receive single byte from upper monitor ( baud rate 9600):
Upper Monitor 0x50 0x51
ICSE012A 0xAB
ICSE013A 0xAD
ICSE014A 0xAC
Module will turn to normal work state after receive “0x51” . Then every data byte will control the relay directly . Each bit controls a realy ( ‘0' mark start , ‘1' mark stop ) . Read following for details:
Bit ICSE012A ICSE013A ICSE014A Remark
0 √ √ √ Control the relay K1
1 √ √ √ Control the relay K2
2 √ × √ Control the relay K3
3 √ × √ Control the relay K4
4 × × √ Control the relay K5
5 × × √ Control the relay K6
6 × × √ Control the relay K7
7 × × √ Control the relay K8
Package Included:
1 x 4CH MICRO USB 5V 4-Channel Relay Module USB Control Relay Module Serial Port 4 Way
1.The module have MICRO USB and serial port , so they can communicate with PC and other device conveniently.
2.The normal working voltage for modules is 5V.And module of ICSE014A have a power interface of 5V. Parameters are as follows:
ICSE012A ICSE013A ICSE014A Unit Remark
CC 4 2 8 channel countof module
I 400 250 700 mA working current
U 5 5 5 V input voltage
√ √ √ whether have serial port
9600 9600 9600 bit/s baud rate ofserialport
F 1000 1000 1000 Hz Module control frequency
× × √ Whether have power
Interface:
Modules all have Micro USB and serial port . Read following for details:
1.Micro USB: Standard micro USB mother mouth.
2.TX : Transmit
3.RX : Receive
4.5V : Volt current condenser
5.GND : Ground
6.Power Interface : Only ICSE014A have . Interface is used when Micro USB cannot give enough power.
Usage method:
USB usage method
Module connect with PC through USB . The connection method is as follows:
1.Then open ”Relay Board Manager” to operate the module . Read ” RelayBoardManager_Reference” for details of the software.
Serial port usage method
Module can communicate with other device directly through serial port .
Module can receive single byte from upper monitor ( baud rate 9600):
Upper Monitor 0x50 0x51
ICSE012A 0xAB
ICSE013A 0xAD
ICSE014A 0xAC
Module will turn to normal work state after receive “0x51” . Then every data byte will control the relay directly . Each bit controls a realy ( ‘0' mark start , ‘1' mark stop ) . Read following for details:
Bit ICSE012A ICSE013A ICSE014A Remark
0 √ √ √ Control the relay K1
1 √ √ √ Control the relay K2
2 √ × √ Control the relay K3
3 √ × √ Control the relay K4
4 × × √ Control the relay K5
5 × × √ Control the relay K6
6 × × √ Control the relay K7
7 × × √ Control the relay K8
Package Included:
1 x 4CH MICRO USB 5V 4-Channel Relay Module USB Control Relay Module Serial Port 4 Way
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
