- -41%
Nincs szín - DT-3266F digitális bilincs multiméter kézi RMS mini ellenállású szerszám alkatrészek
Nincs szín - DT-3266F digitális bilincs multiméter kézi RMS mini ellenállású szerszám alkatrészek
778 Ft
41% megtakarítás
1 319 Ft
Nincs adó
DT-3266F Digital Clamp Multimeter Handheld RMS Mini Resistance Tool Parts
Specifications:Color: yellow
Type: multi-purpose clamp table
Material: ABS
Measuring voltage range: 600 (V)
Measuring current range: 200 (A)
Measuring the resistance range: 200 k Ω - 2 m (Ω)
Battery: 2* AAA batteries (excluding batteries)
Maximum display: 1999, automatic polarity elimination
Measurement method: double integral A/D switch
Sampling speed: 2 times per second
Overload indicator: display "1"
Working environment: 0degree Celsius~40degree Celsius, relative humidity <80%
Storage environment: -10degree Celsius~50degree Celsius, relative humidity <85%
Static: approx. 4 mA
Clamping clamp size: open jaw 25mm;Inner diameter 35 mm
Technical conditions: factory accuracy within 1 year, temperature range of 23degree Celsius±5degree Celsius, relative humidity <75% .
ADP function: put the function switch in the ADP position, connect the sensor or DC voltage signal.Voltage range is 0-199.9mV, LCD displays 0-1999.
Data saving: press the "HOLD" button during measurement, the data will be held and the "H" signal will appear.The data is not refreshed until the button is pressed again.The "H" will then disappear and exit the data holding state.
Battery replacement: if the battery " -" signal appears on the display screen, it indicates that the battery needs to be replaced.Remove the screws, open the trunk, and replace the used battery (AAA battery) with a new one.
Instrument inspection:A. When the measured value exceeds the range, please check whether the battery is low.
B. When measuring voltage or resistance, if there is no reflection, check whether the test leads are well connected.
packing list:Multimeter*1
Table pen*2
Instruction manual*1
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Specifications:Color: yellow
Type: multi-purpose clamp table
Material: ABS
Measuring voltage range: 600 (V)
Measuring current range: 200 (A)
Measuring the resistance range: 200 k Ω - 2 m (Ω)
Battery: 2* AAA batteries (excluding batteries)
Maximum display: 1999, automatic polarity elimination
Measurement method: double integral A/D switch
Sampling speed: 2 times per second
Overload indicator: display "1"
Working environment: 0degree Celsius~40degree Celsius, relative humidity <80%
Storage environment: -10degree Celsius~50degree Celsius, relative humidity <85%
Static: approx. 4 mA
Clamping clamp size: open jaw 25mm;Inner diameter 35 mm
Technical conditions: factory accuracy within 1 year, temperature range of 23degree Celsius±5degree Celsius, relative humidity <75% .
ADP function: put the function switch in the ADP position, connect the sensor or DC voltage signal.Voltage range is 0-199.9mV, LCD displays 0-1999.
Data saving: press the "HOLD" button during measurement, the data will be held and the "H" signal will appear.The data is not refreshed until the button is pressed again.The "H" will then disappear and exit the data holding state.
Battery replacement: if the battery " -" signal appears on the display screen, it indicates that the battery needs to be replaced.Remove the screws, open the trunk, and replace the used battery (AAA battery) with a new one.
Instrument inspection:A. When the measured value exceeds the range, please check whether the battery is low.
B. When measuring voltage or resistance, if there is no reflection, check whether the test leads are well connected.
packing list:Multimeter*1
Table pen*2
Instruction manual*1
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
