- -40%
Nincs szín - TFT tranzisztor mérő LCR 25pF-100mF dióda kapacitás praktikus
Nincs szín - TFT tranzisztor mérő LCR 25pF-100mF dióda kapacitás praktikus
1 355 Ft
40% megtakarítás
2 258 Ft
Nincs adó
TFT Transistor Tester Meter LCR 25pF-100mF Diode Capacitance Practical
Feature:
100% brand new and high quality
It can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, triacs and batteries, etc.
Can also be used to detect infrared waveforms
Zener diode can also be detected, with self-calibration function
After detection, point the infrared remote control at the "IR" light, and then press the button on the remote control, if the detector successfully decodes, it will display the data code and infrared waveform
One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector
Place the pins of the component in the corresponding area, and then turn the small handle, the tester will automatically test it, and the final result will be clearly displayed on the backlit TFT screen
Unlike the usual black and white display, this detector will display the results in color
Specification:
Display: 3.5 inch TFT screen
Diode range: <4.5V
Zener diode: transistorDetection range: 0.01-4.5V
Zener diode detection range: 0.01-30V
Triac range: IGT <6mA
Capacitance: 25pF-100mF
Resistance: 0.01-50MΩ
Inductance: 0.01mH-20H
Battery: 0.1-4.5V
Power mode: rechargeable lithium battery (included)
Size: 8.8 * 8 * 2.8cm / 3.47 * 3.15 * 1.10 inches (approximately)
Package Contents:
1 * Tester
1 *Charging cable
1 * test chip
1 bag of test components
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Feature:
100% brand new and high quality
It can be widely used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, triacs and batteries, etc.
Can also be used to detect infrared waveforms
Zener diode can also be detected, with self-calibration function
After detection, point the infrared remote control at the "IR" light, and then press the button on the remote control, if the detector successfully decodes, it will display the data code and infrared waveform
One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector
Place the pins of the component in the corresponding area, and then turn the small handle, the tester will automatically test it, and the final result will be clearly displayed on the backlit TFT screen
Unlike the usual black and white display, this detector will display the results in color
Specification:
Display: 3.5 inch TFT screen
Diode range: <4.5V
Zener diode: transistorDetection range: 0.01-4.5V
Zener diode detection range: 0.01-30V
Triac range: IGT <6mA
Capacitance: 25pF-100mF
Resistance: 0.01-50MΩ
Inductance: 0.01mH-20H
Battery: 0.1-4.5V
Power mode: rechargeable lithium battery (included)
Size: 8.8 * 8 * 2.8cm / 3.47 * 3.15 * 1.10 inches (approximately)
Package Contents:
1 * Tester
1 *Charging cable
1 * test chip
1 bag of test components
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek