• -25%

RF erősítő, 1-3000Mhz RF alacsony zajszintű erősítő FM műsorszóráshoz, távirányítós vevő

RF erősítő, 1-3000Mhz RF alacsony zajszintű erősítő FM műsorszóráshoz, távirányítós vevő

1 250 Ft 25% megtakarítás
1 666 Ft
Nincs adó
RF Amplifier,1‑3000Mhz RF Low Noise Amplifier For FM Broadcasting, Remote Control Receiver
This amplifier can work in a wide frequency range with stable gain. When different gain values are needed, the supply voltage can be reduced or customized. With metal shell shield, which has a noise reduction effect.
This amplifier's noise figure is 2dB (measured at 1.5GHz), owns smaller noise and larger dynamic range, especially suitable for various RF receiving front‑end circuits, and increase the communication distance.
WIFI receiver RF front end and other places where low noise and small signal RF amplification is required! Due to its low performance, it can be perfectly matched with various circuits. The product is very thin, very pratical.
The product has a wide frequency range, high gain, low noise figure. The low‑noise amplifier module can provide very low noise in a wide frequency range. This can provide a communication effect between the receiver and the transmitter.
Wide range of applications, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplification that require low noise.
Specification:
Item Type: RF Wideband Low Noise Amplifier LNA
Technical Indicators:
Power Supply Voltage: 12V DC (typical current value 75MA)
Gain: 19.5DB input and output impedance: 50 ohms
Maximum Output Power: 19.5dBm (under 6VPP/50 ohm load)
Input Signal: Less than or equal to 0DBM (the output signal is already distorted when input is greater than 0dBm)
Bandwidth: 1MHz to 3GHz (gain is different at different frequencies, please refer to S21 curve index for details)
Noise Figure: 2dB (measured at 1.5GHz)
With metal shell shield
Others: When different gain values are needed, the power supply voltage can be reduced or customized.
Point Frequency Method Gain:
F=15.2MHZ GAIN=17.99DB
F=345.2MHZ GAIN=19.55DB
F=945.2MHZ GAIN=18.09DB
F=1.500GHZ GAIN=16.16DB
F=1.955GHZ GAIN=15.77DB
F=2.295 GHZ GAIN=14.11DB
F=2.610 GHZ GAIN=13.60DB
F=2.895MHZ GAIN=12.56DB
Colour:green
Material:PCB
Package Contents:
1 * Amplifier LNA (1-3000MHz gain: 20dB)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

RF Amplifier,1‑3000Mhz RF Low Noise Amplifier For FM Broadcasting, Remote Control Receiver
This amplifier can work in a wide frequency range with stable gain. When different gain values are needed, the supply voltage can be reduced or customized. With metal shell shield, which has a noise reduction effect.
This amplifier's noise figure is 2dB (measured at 1.5GHz), owns smaller noise and larger dynamic range, especially suitable for various RF receiving front‑end circuits, and increase the communication distance.
WIFI receiver RF front end and other places where low noise and small signal RF amplification is required! Due to its low performance, it can be perfectly matched with various circuits. The product is very thin, very pratical.
The product has a wide frequency range, high gain, low noise figure. The low‑noise amplifier module can provide very low noise in a wide frequency range. This can provide a communication effect between the receiver and the transmitter.
Wide range of applications, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplification that require low noise.
Specification:
Item Type: RF Wideband Low Noise Amplifier LNA
Technical Indicators:
Power Supply Voltage: 12V DC (typical current value 75MA)
Gain: 19.5DB input and output impedance: 50 ohms
Maximum Output Power: 19.5dBm (under 6VPP/50 ohm load)
Input Signal: Less than or equal to 0DBM (the output signal is already distorted when input is greater than 0dBm)
Bandwidth: 1MHz to 3GHz (gain is different at different frequencies, please refer to S21 curve index for details)
Noise Figure: 2dB (measured at 1.5GHz)
With metal shell shield
Others: When different gain values are needed, the power supply voltage can be reduced or customized.
Point Frequency Method Gain:
F=15.2MHZ GAIN=17.99DB
F=345.2MHZ GAIN=19.55DB
F=945.2MHZ GAIN=18.09DB
F=1.500GHZ GAIN=16.16DB
F=1.955GHZ GAIN=15.77DB
F=2.295 GHZ GAIN=14.11DB
F=2.610 GHZ GAIN=13.60DB
F=2.895MHZ GAIN=12.56DB
Colour:green
Material:PCB
Package Contents:
1 * Amplifier LNA (1-3000MHz gain: 20dB)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
1005003916077410. - fishing
1005003916077410.

Hasonló kategóriák mint 16 :

Reviews

Write your review

RF erősítő, 1-3000Mhz RF alacsony zajszintű erősítő FM műsorszóráshoz, távirányítós vevő

RF Amplifier,1‑3000Mhz RF Low Noise Amplifier For FM Broadcasting, Remote Control Receiver
This amplifier can work in a wide frequency range with stable gain. When different gain values are needed, the supply voltage can be reduced or customized. With metal shell shield, which has a noise reduction effect.
This amplifier's noise figure is 2dB (measured at 1.5GHz), owns smaller noise and larger dynamic range, especially suitable for various RF receiving front‑end circuits, and increase the communication distance.
WIFI receiver RF front end and other places where low noise and small signal RF amplification is required! Due to its low performance, it can be perfectly matched with various circuits. The product is very thin, very pratical.
The product has a wide frequency range, high gain, low noise figure. The low‑noise amplifier module can provide very low noise in a wide frequency range. This can provide a communication effect between the receiver and the transmitter.
Wide range of applications, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplification that require low noise.
Specification:
Item Type: RF Wideband Low Noise Amplifier LNA
Technical Indicators:
Power Supply Voltage: 12V DC (typical current value 75MA)
Gain: 19.5DB input and output impedance: 50 ohms
Maximum Output Power: 19.5dBm (under 6VPP/50 ohm load)
Input Signal: Less than or equal to 0DBM (the output signal is already distorted when input is greater than 0dBm)
Bandwidth: 1MHz to 3GHz (gain is different at different frequencies, please refer to S21 curve index for details)
Noise Figure: 2dB (measured at 1.5GHz)
With metal shell shield
Others: When different gain values are needed, the power supply voltage can be reduced or customized.
Point Frequency Method Gain:
F=15.2MHZ GAIN=17.99DB
F=345.2MHZ GAIN=19.55DB
F=945.2MHZ GAIN=18.09DB
F=1.500GHZ GAIN=16.16DB
F=1.955GHZ GAIN=15.77DB
F=2.295 GHZ GAIN=14.11DB
F=2.610 GHZ GAIN=13.60DB
F=2.895MHZ GAIN=12.56DB
Colour:green
Material:PCB
Package Contents:
1 * Amplifier LNA (1-3000MHz gain: 20dB)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.

Write your review