1.Range 10kg, dividing value 1g
2.Range 30kg, dividing value 5g
3.Range 1kg, dividing value 0.1g
[weighing range]: range 10kg, dividing value 1g. (and other range options)
"Pressure tray Specification]: default 13cm*9.5cm (this tray is only for customer testing function, when it is actually used to install pressure sensors into their own equipment)
[circuit board Specification]: long 14.1cm * wide 9.3cm * thick 1.5mm
[display specifications]: Standard LCD1602 LCD screen, display size: 70mm*24mm.
[display interface]: the 16P pin with 2.54mm spacing is extended by DuPont line.
[keyboard specifications]: wide 65mm * high 60mm, the back is self-adhesive, can be pasted on the surface of the device.
[keyboard connector]: the joint is 8P DuPont head with 2.54mm spacing, which can be plugged and 80mm long.
[basic circuit functions]:
The weight of the feeding is set, and the feeding equipment is started according to the "filling" key. The weight of the electronic scale is added in real time, and the feeding equipment is automatically closed when the set weight is reached. In automatic mode, the automatic feeding device can be realized by induction of empty bottle weight without the need for keystroke starting.
The control principle of the feeding equipment:
By controlling the conduction and disconnection of the two contacts of the terminals, the control of other devices can be realized. The two contacts of the terminals do not output voltage, but only a switch is controlled between them.
It can control any electrical appliances between 0-220V, such as pumps, solenoid valves, and other equipment. DC and AC can be controlled. DC control positive pole, alternating current control fire line. If you want to control the motor above 300W, it is recommended to add an AC contactor in the middle to ensure the stability and safety of the system.
Trump function 1: fixed weight filling, higher precision!
The weight of the filling is used to control the filling, and the weight is automatically stopped. It is the real "CNC" filling motherboard.
Trump card function two: "four automation" is the real full automatic!
The first automatic: put the bottle on the skin automatically.
Second automatic: after peeling, automatically start irrigation.
Third automatically: the amount of filling is automatically stopped.
The fourth automatic: remove the bottle and reset it automatically.
This is the real full automation, which can truly be called intelligence.
Trump function three: easy to operate, easy to use!
Use the equipment to fill the liquid, whether you need to fill a few hundred bottles or thousands of bottles, and you don't need to press any button or pedal during the whole process. You don't have to worry about the next empty bottle being late, and you don't have to worry about closing the water over the bottle.
All you have to do is put the empty bottle up and take it off the bottle.
The whole process is super easy and thorough and farewell to traditional filling machine. It needs to carry out complex operation repeatedly, and at the same time, always straining nerves and worrying about mistakes. It is true that manual labor is removed from complex operations.
Trump card function four: empty bottle weight difference is big, filling completely has no influence.
In actual production, there are many bottles (such as thick wall glass bottles, ceramic bottles, wine bottles, etc.). The difference of the weight of the empty bottle is very big, which causes great trouble for batch loading and filling, and must be removed manually every time. This product is a perfect solution to this problem. When full automatic batch filling, the product can be automatically peeled after the container is put on the container. No matter how much the bottle weight is different, the quantity of the product is not affected.
Functional introduction [instructions]
1. The screen shows:
W:XXXXg (real time weight) U:XXg (start weight)
M:XXXXg (filling weight) K: Guan (open: irrigation, Guan: no irrigation)
In automatic mode, the weight of the bottle exceeds U, triggering automatic filling.
2, key function:
[auto] key: the function of "enter / exit" automatic mode (after entering automatic mode, it will display C:xxg).
"Peeling" key: the function of peeling and clearing
[setting] key: setting the value of "filling weight" M
[start] key: set the value of "start weight" U
[filling] key: manual start filling function (click again is suspended).
3. The setting method of "filling weight" M:
Press the setting button (M starts to blink), enter the value to be set, then press the set button (M stop flashing), that is, set up.
4, the setting method of "start weight" U: (container weight is greater than U value, can trigger automatic filling).
Press the [restart] key (U starts to blink), enter the value to be set, then press the [restart] key (U stop flashing), that is, set up.
5, "manual filling mode" operation method (the upper right corner does not display any characters, indicating manual mode).
(1) put the container, press the [peeling] key to remove the skin, press the filling button to start filling. The weight of the injected liquid reaches the set filling weight M, and automatically stops.
(2) remove the filled container, put down an empty container, press the [peeling] [filling] key to start the next filling.
6, "automatic filling mode" operation method: (the upper right corner shows U:xxg, indicating automatic mode).
(1) press the "auto" button and put the container on. The system will automatically peel and automatically start filling. When the filling weight reaches the set value of M, automatic filling is stopped.
(2) remove the filled container, and the system will reset automatically. Place the next container and automatically start the next quantitative filling.
7, cancel the automatic skin removal method: (refers to the automatic filling mode of automatic peeling function).
Turn off the machine to restart the machine, press a button after opening the machine, then press and hold [3] key not to loose hands, until the machine alarm "beep" after the cancellation of the automatic peeling function. If you want to open the automatic peeling function, repeat the above operation. After setting up the machine will remember, and it will be valid forever.
8, in the automatic filling mode, the delay between the container and the automatic peeling is 0.8 seconds, and the customer can set it according to the actual needs. It can set the range: 0.1~9.9 seconds.
9, in the automatic filling mode, fill the water automatically after stopping, and then we remove the container. From "take off the container" to "system automatic zero reset" delay between the default of 0.8 seconds, customers can be set according to the actual needs of the individual, can be set range: 0.1~9.9 seconds.
Note: the product is a weighing and filling controller circuit.
(all accessories include: PCB, pressure sensor, 5V power adapter)
The interface of the pump switch is reserved on the circuit board, and the equipment of the pump or electromagnetic water valve needs to be prepared by itself.
Specifications
Material
-
Origin
Mainland China