Kategóriák

Tool Drill Bits Kit Cutting HSS-6542 Drill 13/19/25 Piece HSS-M2 Tungsten
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*HSS-M2 Tungsten Straight Shank Drill Set, Metal Steel Plate Drill Hole Opener
The product has the characteristics of precise positioning and fast cutting, strong chip removal ability, and the surface is sandblasted and tied, which is more wear-resistant.
*Suitable for drilling of various materials such as 45# steel, die steel, I-beam, ordinary steel, angle iron, aluminum, copper, wood, etc. Sharp, safe and durable
*Packing: plastic box
*Note: This product can only drill stainless steel with a thickness of 1-3mm. It is too thick to drill. Non-stainless steel special drills
Specifications:
*13-piece set: 1.5/2.0/2.5/3.0/3.2/3.5/4.0/ 4.5/4.8/ 5.0/5.5/6.0/ 6.5mm
*19-piece set: 1.0/1.5/2.0/2.5/3.0/3.5/4.0/4.5/5.0/5.5/6.0/6.5/7.0/7.5/8.0/8.5/9.0/9.5/10mm
*25-piece set: 1.0/1.5/2.0/2.5/3.0/3.5/4.0/4.5/5.0/5.5/6.0/6.5/7.0/7.5/8.0/8.5/9.0/9.5/10/10.5/11/11.5/12/ 12.5/13mm
*Package Size:
136*77*15mm
168*115*37mm
185*116*55mm
Note for use: When drilling with different materials, you need to control the different speeds of the drill floor when using it. Especially when drilling hard steel materials, so as not to drill too fast and cause high temperature to burn the drill bit. When using the product conditions, you can add coolant or water to cool down.
Common sense of product use: The drill bit is installed on a fixed bench drill and can be used for longer than ordinary hand drills.
Package Contents:
13/19/25* Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tool Drill Bits Kit Cutting HSS-6542 Drill 13/19/25 Piece HSS-M2 Tungsten
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*HSS-M2 Tungsten Straight Shank Drill Set, Metal Steel Plate Drill Hole Opener
The product has the characteristics of precise positioning and fast cutting, strong chip removal ability, and the surface is sandblasted and tied, which is more wear-resistant.
*Suitable for drilling of various materials such as 45# steel, die steel, I-beam, ordinary steel, angle iron, aluminum, copper, wood, etc. Sharp, safe and durable
*Packing: plastic box
*Note: This product can only drill stainless steel with a thickness of 1-3mm. It is too thick to drill. Non-stainless steel special drills
Specifications:
*13-piece set: 1.5/2.0/2.5/3.0/3.2/3.5/4.0/ 4.5/4.8/ 5.0/5.5/6.0/ 6.5mm
*19-piece set: 1.0/1.5/2.0/2.5/3.0/3.5/4.0/4.5/5.0/5.5/6.0/6.5/7.0/7.5/8.0/8.5/9.0/9.5/10mm
*25-piece set: 1.0/1.5/2.0/2.5/3.0/3.5/4.0/4.5/5.0/5.5/6.0/6.5/7.0/7.5/8.0/8.5/9.0/9.5/10/10.5/11/11.5/12/ 12.5/13mm
*Package Size:
136*77*15mm
168*115*37mm
185*116*55mm
Note for use: When drilling with different materials, you need to control the different speeds of the drill floor when using it. Especially when drilling hard steel materials, so as not to drill too fast and cause high temperature to burn the drill bit. When using the product conditions, you can add coolant or water to cool down.
Common sense of product use: The drill bit is installed on a fixed bench drill and can be used for longer than ordinary hand drills.
Package Contents:
13/19/25* Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Rod Spring Collets Silver Kit High quality Shaft Holder Carbon Steel 8Pcs with
Features:
* This kit includes a shank extension rod and 7 spring collets.
* 100% Brand new and high quality.
* The shank extension rod allows you to do deep hole processing.
* A perfect replacement for the old or worn one.
* Extension rod is designed to eliminate unbalance and increase safety during cutting and milling.
* It is widely used in boring, milling, drilling, tapping, grinding and other processing.
Specifications:
* Total height: Approx. 18mm
* Outer diameter(Max): Approx. 11.5mm
* Gripping range: 1~7MM (1mm,2mm,3mm,4mm,5mm,6mm,7mm)
* Fits metric shank size(s): For example,1mm Collets Fits 1mm metric shank,2mm Collets Fits 2mm metric shank.
* Material: High Grade 45 Carbon Steel
* Color: Silver(as pictures show)
Package contents:
1* 8pcs Spring Collets & Extension Rod Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Carbide Turning Tools Inserts Blade Kit MGEHR1212-2 Cut-Off 2mm Useful
Features:
Good toughness.
High strength and hardness.
Durable in use.
High quality and brand new.
Specification:
Cut-Off Tool Holder:
Model: MGEHR1212-2
Color: Black (As Picture Show)
Hardness: More than 40
Dimension: 12*12*100mm (Approx)
Grooving Width: 2mm (Approx)
Inserts:
Model: MGMN200-G
Material: Carbide
Color: Blue Nano Coating (As Picture Show)
Insert Width: 2mm (Approx)
Length: 15mm (Approx)
Package Contents:
1 * Hex Wrench (23*60mm)
1 * MGEHR1212-2 Cut-Off Tool Holder
10p * Carbide Insert
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

End mill Carbide Inserts 14x14x2mm Woodworking Supplies Turning Equipment
Details:
*100% brand new and high quality.
*Designed for popular wood lathe tool.
*Mounted with screw.
*High strength and hardness.
*Compared with steel the solid carbide stays sharp for longer.
*High accuracy, stable performance.
*Long service life.
*Color: As Pictures Show
*Size: 14x14x2mm (Approx.)
Package Contents:
10*Carbide Inserts
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1 3/16-16UN Right Hand Taps Drill Bits HSS Machine Plugs Threading 138mm Tools
Features:
*100% Brand new and high quality
*Using High-quality HSS, high hardness quenching rigid and long service life.
*Sharpen cutting performance, good chip effect; good surface finish, large chip flutes, removal chip smooth.
Specifications:
*Color: As Pictures Show
*Material:High-speed steel
*Dimension: (Approx.)
Taps Threading: 13/16-16
Total length: 138mm/5.4inch
Package Content:
1*HSS Right Hand Tap
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6mm Tungsten Carbide End Mill 4 Flute HRC50 50MM Length CNC Milling Cutter Bit
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for die block steel, wrought iron, carbon steel, alloy steel, chisel tool steel, general iron material, etc.
Specifications
* Material: Tungsten steel
* Color: Silver (As pictures show)
* Cutting Diameter: 6mm / 0.23 inch
* Shank Diameter: 6mm / 0.23 inch
Package contents:
5* 4 Flutes End Mill Cutters
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

5x 6mmx50mm Tungsten Carbide 4 Flute End Mill CNC Milling Cutter HRC50 TIALN H1
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for die block steel, wrought iron, carbon steel, alloy steel, chisel tool steel, general iron material, etc.
Specifications
* Material: Tungsten steel
* Color: Silver (As pictures show)
* Cutting Diameter: 6mm / 0.23 inch
* Shank Diameter: 6mm / 0.23 inch
Package contents:
5* 4 Flutes End Mill Cutters
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

L shape Lathe Cutter Inserts Blade MGEHR1212-2 Grooving Durable Practical
Details:
High quality and brand new
Model: MGEHR1212-2
Material: Alloy steel
Total Length: 100mm
Shank: 12*12mm
Grooving Width: 2mm
Accept Insert: MGMN200
Package Contents:
1 * MGEHR1212-2 Tool Holder
10 * MGMN200 Carbide Insert
1 * L Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Kit Turning Tool Holder Insert Width 2mm Steel insert MGMN200 Practical
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* High grip, impact resistance and strong, clear speed advantage
* Unmatched performance with tight tolerances;
* Practical and various treatment environments, even in very dirty environments, such as cast iron, have good function;
* User clamping and convenient replacement, just replace the insert and pad with a wrench;
* The attached steel is good and has a long service life, which reduces the user cost of the tool.
Specification:
* Name: MGEHR 1010-2 10x100mm Slotted Tool Holder with 10 MGMN200 insert for 2mm Cutting
* Tool Bar Model: MGEHR1010-2
* Tool Bar Color: Black(As pictures show)
* Tool Bar Size: 10x10x100mm(Approx.)
* Tool Bar Slot Width: 2mm(Approx.)
* Gold Plated Blade Model: MGMN200
* Insert Color: Gold(As pictures show)
* Insert Width: 2mm(Approx.)
* Insert Material: Steel
Package Contents:
1 * Hex Wrench
1 * MGEHR1010-2 Cut-Off Tool Holder
10 * MGMN200-G Carbide Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

20PC Router Bits 1/8" Carbide CNC Router Bits Single Flute Spiral Set Kit
Product Description:
Specifications:
Suitable material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
Used for: 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
Items details:
Shank diameter(SD): 3.175mm (approx)
Cutting edge diameter (CED): 3.175mm(approx)
Cutting edge length (CEL): 17mm (approx)
Item Length: 40mm
Material: Solid carbide
Package includes:
2 set (10PSC) 1/8" Carbide CNC Router Bits Single Flute Tools
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tools Turning Tool Holder Black 12pcs MGEHR1010-2 High quality Equipment
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* High grip, impact resistance and strong, clear speed advantage
* Unmatched performance with tight tolerances;
* Practical and various treatment environments, even in very dirty environments, such as cast iron, have good function;
* User clamping and convenient replacement, just replace the insert and pad with a wrench;
* The attached steel is good and has a long service life, which reduces the user cost of the tool.
Specification:
* Name: MGEHR 1010-2 10x100mm Slotted Tool Holder with 10 MGMN200 insert for 2mm Cutting
* Tool Bar Model: MGEHR1010-2
* Tool Bar Color: Black(As pictures show)
* Tool Bar Size: 10x10x100mm(Approx.)
* Tool Bar Slot Width: 2mm(Approx.)
* Gold Plated Blade Model: MGMN200
* Insert Color: Gold(As pictures show)
* Insert Width: 2mm(Approx.)
* Insert Material: Steel
Package Contents:
1 * Hex Wrench
1 * MGEHR1010-2 Cut-Off Tool Holder
10 * MGMN200-G Carbide Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

8 pcs Milling Cutter set Router Bit kit Steel Multifunction Practical Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*It is sharp, wear-resistant, smooth chip removal
*With high hardness, rust proof and corrosion resistant.
*Fit for Ebony, rosewood, deft knots, mahogany, sandalwood blood and so on
*When processing hardwood, the wood must have vertical grains, and the drilling speed is about 2600-2800r/min.
Specifications:
*Material: Steel
*Color:As Pictures Show
*Blade size:6/8/10/12/14/15/16/18/20mm
*Optional Types:
A: 3pc Blades(16/18/20mm) 3pc Drills 1pc Handle 1pc Spanner
B: 3pc Blades(12/14/15mm) 3pc Drills 1pc Handle 1pc Spanner
C: 3pc Blades(6/8/10mm) 3pc Drills 1pc Handle 1pc Spanner
*Quantity:8pcs/set
Package Contents:3 * Blades
3 * Drills
1 * Handle
1 * Spanner
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

8 pcs Milling Cutter set Router Bit kit Steel Multifunction Practical Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*It is sharp, wear-resistant, smooth chip removal
*With high hardness, rust proof and corrosion resistant.
*Fit for Ebony, rosewood, deft knots, mahogany, sandalwood blood and so on
*When processing hardwood, the wood must have vertical grains, and the drilling speed is about 2600-2800r/min.
Specifications:
*Material: Steel
*Color:As Pictures Show
*Blade size:6/8/10/12/14/15/16/18/20mm
*Optional Types:
A: 3pc Blades(16/18/20mm) 3pc Drills 1pc Handle 1pc Spanner
B: 3pc Blades(12/14/15mm) 3pc Drills 1pc Handle 1pc Spanner
C: 3pc Blades(6/8/10mm) 3pc Drills 1pc Handle 1pc Spanner
*Quantity:8pcs/set
Package Contents:3 * Blades
3 * Drills
1 * Handle
1 * Spanner
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

8 pcs Milling Cutter set Router Bit kit Steel Multifunction Practical Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*It is sharp, wear-resistant, smooth chip removal
*With high hardness, rust proof and corrosion resistant.
*Fit for Ebony, rosewood, deft knots, mahogany, sandalwood blood and so on
*When processing hardwood, the wood must have vertical grains, and the drilling speed is about 2600-2800r/min.
Specifications:
*Material: Steel
*Color:As Pictures Show
*Blade size:6/8/10/12/14/15/16/18/20mm
*Optional Types:
A: 3pc Blades(16/18/20mm) 3pc Drills 1pc Handle 1pc Spanner
B: 3pc Blades(12/14/15mm) 3pc Drills 1pc Handle 1pc Spanner
C: 3pc Blades(6/8/10mm) 3pc Drills 1pc Handle 1pc Spanner
*Quantity:8pcs/set
Package Contents:3 * Blades
3 * Drills
1 * Handle
1 * Spanner
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill bits set Woodworking drill bits Tool Drill Bits Masonry 23pieces
Features:
*100% brand new and high quality
*Straight round shank.
*Great chip removal ability.
*Drills in different sizes to meet varied drilling needs.
*Made of premium quality material, durable to use.
*Masonry Drill Bits : Suitable for drilling ceramic tile, brick, block, concrete, metal, plastic and wood
*Titanium Plating Drill Bits:Suitable for drilling work in wood, aluminum and iron chip .
*Brad point wood drill bits: Suitable for wood
Specifications:
*Shank Type: Round Head
*Color: As the picture shows
Package Contents:
5 x Masonry drill bits (4, 5, 6, 8 and 10mm)
5 x Brad point wood drill bits (4, 5, 6, 8 and 10mm)
13 x Titanium Plating Drill Bits (1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6 and 6.5mm).
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Long service life. The area is free and easy to use.
*Plasma cutting torch PT-31, can work with for ESAB/for L-TEC PT-31, for AG-40, for JG-40 and for WSD-LG40 Cutting Torch suitable for the use of 40A current under high frequency plasma cutting machine, cutting 12MM following iron
*The machine brands are for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan, etc.
*These torches for plasma cutting machines, such as for CUT-40, for CUT-40D, for LGK-40, for CT312, for CT312D, for CT416, for CT416D, for CT518, for CT518D, for Super160, for Super160P, etc.
Specification:
*Color: Rose Gold White (As pictures show)
*Material: Metal Ceramic
*Optional Quantities: 40pcs, 46pcs, 70pcs, 75pcs, 85pcs
*Applicable to: for PT-31 for LG-40 for Flashlight for CUT-40 50
*Cup Cover Size(Approx.): Total Length: 30mm, Inner Diameter: 19mm, Top Inner Diameter: 9mm
*Swirl Ring Size(Approx.): Length: 6mm, Inner Diameter: 5mm
*Tip Size(Approx.): Total Length:10mm, Bottom Inside: 6mm, Bottom Outside: 11mm.
*Electrode Size(Approx.): Total Length: 30mm, Shank Diameter:3.5mm.
Package Contents(Optional):
Package Contents 1:
10* Tips
10* Electrodes
10* Shieded Cups
10* Swirl Ring
Package Contents 2:
14*Tips
16*Electrodes
8* Shieded Cups
8* Swirl Ring
Package Contents 3:
30* Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 4:
35*Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 5:
30* Tip
15* Electrodes
10* Shieded Cups
30* Swirl Circles
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Long service life. The area is free and easy to use.
*Plasma cutting torch PT-31, can work with for ESAB/for L-TEC PT-31, for AG-40, for JG-40 and for WSD-LG40 Cutting Torch suitable for the use of 40A current under high frequency plasma cutting machine, cutting 12MM following iron
*The machine brands are for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan, etc.
*These torches for plasma cutting machines, such as for CUT-40, for CUT-40D, for LGK-40, for CT312, for CT312D, for CT416, for CT416D, for CT518, for CT518D, for Super160, for Super160P, etc.
Specification:
*Color: Rose Gold White (As pictures show)
*Material: Metal Ceramic
*Optional Quantities: 40pcs, 46pcs, 70pcs, 75pcs, 85pcs
*Applicable to: for PT-31 for LG-40 for Flashlight for CUT-40 50
*Cup Cover Size(Approx.): Total Length: 30mm, Inner Diameter: 19mm, Top Inner Diameter: 9mm
*Swirl Ring Size(Approx.): Length: 6mm, Inner Diameter: 5mm
*Tip Size(Approx.): Total Length:10mm, Bottom Inside: 6mm, Bottom Outside: 11mm.
*Electrode Size(Approx.): Total Length: 30mm, Shank Diameter:3.5mm.
Package Contents(Optional):
Package Contents 1:
10* Tips
10* Electrodes
10* Shieded Cups
10* Swirl Ring
Package Contents 2:
14*Tips
16*Electrodes
8* Shieded Cups
8* Swirl Ring
Package Contents 3:
30* Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 4:
35*Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 5:
30* Tip
15* Electrodes
10* Shieded Cups
30* Swirl Circles
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Long service life. The area is free and easy to use.
*Plasma cutting torch PT-31, can work with for ESAB/for L-TEC PT-31, for AG-40, for JG-40 and for WSD-LG40 Cutting Torch suitable for the use of 40A current under high frequency plasma cutting machine, cutting 12MM following iron
*The machine brands are for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan, etc.
*These torches for plasma cutting machines, such as for CUT-40, for CUT-40D, for LGK-40, for CT312, for CT312D, for CT416, for CT416D, for CT518, for CT518D, for Super160, for Super160P, etc.
Specification:
*Color: Rose Gold White (As pictures show)
*Material: Metal Ceramic
*Optional Quantities: 40pcs, 46pcs, 70pcs, 75pcs, 85pcs
*Applicable to: for PT-31 for LG-40 for Flashlight for CUT-40 50
*Cup Cover Size(Approx.): Total Length: 30mm, Inner Diameter: 19mm, Top Inner Diameter: 9mm
*Swirl Ring Size(Approx.): Length: 6mm, Inner Diameter: 5mm
*Tip Size(Approx.): Total Length:10mm, Bottom Inside: 6mm, Bottom Outside: 11mm.
*Electrode Size(Approx.): Total Length: 30mm, Shank Diameter:3.5mm.
Package Contents(Optional):
Package Contents 1:
10* Tips
10* Electrodes
10* Shieded Cups
10* Swirl Ring
Package Contents 2:
14*Tips
16*Electrodes
8* Shieded Cups
8* Swirl Ring
Package Contents 3:
30* Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 4:
35*Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 5:
30* Tip
15* Electrodes
10* Shieded Cups
30* Swirl Circles
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Long service life. The area is free and easy to use.
*Plasma cutting torch PT-31, can work with for ESAB/for L-TEC PT-31, for AG-40, for JG-40 and for WSD-LG40 Cutting Torch suitable for the use of 40A current under high frequency plasma cutting machine, cutting 12MM following iron
*The machine brands are for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan, etc.
*These torches for plasma cutting machines, such as for CUT-40, for CUT-40D, for LGK-40, for CT312, for CT312D, for CT416, for CT416D, for CT518, for CT518D, for Super160, for Super160P, etc.
Specification:
*Color: Rose Gold White (As pictures show)
*Material: Metal Ceramic
*Optional Quantities: 40pcs, 46pcs, 70pcs, 75pcs, 85pcs
*Applicable to: for PT-31 for LG-40 for Flashlight for CUT-40 50
*Cup Cover Size(Approx.): Total Length: 30mm, Inner Diameter: 19mm, Top Inner Diameter: 9mm
*Swirl Ring Size(Approx.): Length: 6mm, Inner Diameter: 5mm
*Tip Size(Approx.): Total Length:10mm, Bottom Inside: 6mm, Bottom Outside: 11mm.
*Electrode Size(Approx.): Total Length: 30mm, Shank Diameter:3.5mm.
Package Contents(Optional):
Package Contents 1:
10* Tips
10* Electrodes
10* Shieded Cups
10* Swirl Ring
Package Contents 2:
14*Tips
16*Electrodes
8* Shieded Cups
8* Swirl Ring
Package Contents 3:
30* Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 4:
35*Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 5:
30* Tip
15* Electrodes
10* Shieded Cups
30* Swirl Circles
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Long service life. The area is free and easy to use.
*Plasma cutting torch PT-31, can work with for ESAB/for L-TEC PT-31, for AG-40, for JG-40 and for WSD-LG40 Cutting Torch suitable for the use of 40A current under high frequency plasma cutting machine, cutting 12MM following iron
*The machine brands are for Rilon, for Riland, for Jasic, for Mitech, for Chiry, for UNT, for Krypton, for Longetivity, for Berlan, etc.
*These torches for plasma cutting machines, such as for CUT-40, for CUT-40D, for LGK-40, for CT312, for CT312D, for CT416, for CT416D, for CT518, for CT518D, for Super160, for Super160P, etc.
Specification:
*Color: Rose Gold White (As pictures show)
*Material: Metal Ceramic
*Optional Quantities: 40pcs, 46pcs, 70pcs, 75pcs, 85pcs
*Applicable to: for PT-31 for LG-40 for Flashlight for CUT-40 50
*Cup Cover Size(Approx.): Total Length: 30mm, Inner Diameter: 19mm, Top Inner Diameter: 9mm
*Swirl Ring Size(Approx.): Length: 6mm, Inner Diameter: 5mm
*Tip Size(Approx.): Total Length:10mm, Bottom Inside: 6mm, Bottom Outside: 11mm.
*Electrode Size(Approx.): Total Length: 30mm, Shank Diameter:3.5mm.
Package Contents(Optional):
Package Contents 1:
10* Tips
10* Electrodes
10* Shieded Cups
10* Swirl Ring
Package Contents 2:
14*Tips
16*Electrodes
8* Shieded Cups
8* Swirl Ring
Package Contents 3:
30* Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 4:
35*Tip
15* Electrodes
10* Shieded Cups
15* Swirl Ring
Package Contents 5:
30* Tip
15* Electrodes
10* Shieded Cups
30* Swirl Circles
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Extension ER11 Collet Machine Tools Holder Milling Drilling Chuck 7pcs
Features:
*100% brand new and high quality
*Hardened and precision ground
*Built in self-release design and tools will never get stuck in holder
*Widely used for boring, milling, drilling, silk attack, sculpture, CNC, and other processing.
*Used with any standard ER collet chucks for coolant-thru tool applications.
*Each collet is well packed in separate protective container with label.
Specifications:
ER11 1-7mm Collet Chuck
*Total height: 18mm(Approx)
*Outer diameter(Max): 11.5mm(Approx)
*Gripping range: 1MM to 7MM (1mm,2mm,3mm,4mm,5mm,6mm,7mm)(Approx)
*Fits metric shank size(s): For example,1mm Collets Fits 1mm metric shank,2mm Collets Fits 2mm metric shank.
ER11A 5mm Motor Shaft Holder Extension Rod
*Type: ER11A-5mm
*Material: Steel
*Height: 40mm / 1.57"(Approx)
*Shaft Diameter: 16mm / 0.63"(Approx)
*Shaft Inner Diameter: 5mm(±0.02mm) / 0.2"(Approx)
*Nut Diameter: 19mm / 7.48"(Approx)
*Nut Inner Diameter: 9mm / 3.54"(Approx)
*Shaft Hole: 5mm need to install heating expansion
Package Contents:
1*Extension Rod
7*ER11 Collets
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tip Nozzles Plasma Cutter Torch Electrode Replacement For SG-55 AG-60 WSD-60
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Plasma cutting machine consumable torch electrode nozzle kit for SG-55 AG-60 WSD-60
*Fit for CUT-60, LGK-60 plasma cutting machine torch SG-55, AG-60, WSD-60
*Easy to install, perfect match original
*Featured for stable performance and high reliability
Specification:
Electrode:
*Color: As pictures show
*Material: Metal
*Length: 27.5 mm (Approx.)
*Theme: M6
*Diameter: 6.5mm(Approx.)
*Current: 50mA
Nozzle:
*Color: Silver (As pictures show)
*Material: Metal
*Inner Diameter: 9mm(Approx.)
*Total Height: 21mm(Approx.)
*Thread: M14
*Current: 50mA
*Sharp Hole Diameter: 1.3mm(Approx.)
Shield Cup:
*Color: Purple (As pictures show)
*Material: Ceramic
*Height: 2.2 cm(Approx.)
Interval Guide:
*Color: Silver(As pictures show)
*Material: Iron
*Height: 2.7 cm(Approx.)
Package Contents:
10*Electrodes
10*Plasma Cutter Nozzles
3*Shield Cups
3*Spacer Guides
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

HSS High Speed Steel M15*1.5mm Tap&Die Metric Thread Right Hand Metalwork Tool
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* HSS M15 x 1.5mm Tap & M15 x 1.5mm Die Metric Thread Right Hand
* Direction: Right Hand
* Lead Length: 101mm(Approx.)
* Die Outer Diameter: 38mm(Approx.)
* Die Height: 14mm(Approx.)
* Color: Silver(As pictures show)
Package Contents:
1 * Tap
1 * Die
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* High grip, impact resistance and strong, clear speed advantage
* Unmatched performance with tight tolerances;
* Practical and various treatment environments, even in very dirty environments, such as cast iron, have good function;
* User clamping and convenient replacement, just replace the insert and pad with a wrench;
* The attached steel is good and has a long service life, which reduces the user cost of the tool.
Specification:
* Name: MGEHR 1010-2 10x100mm Slotted Tool Holder with 10 MGMN200 insert for 2mm Cutting
* Tool Bar Model: MGEHR1010-2
* Tool Bar Color: Black(As pictures show)
* Tool Bar Size: 10x10x100mm(Approx.)
* Tool Bar Slot Width: 2mm(Approx.)
* Gold Plated Blade Model: MGMN200
* Insert Color: Gold(As pictures show)
* Insert Width: 2mm(Approx.)
* Insert Material: Steel
Package Contents:
1 * Hex Wrench
1 * MGEHR1010-2 Cut-Off Tool Holder
10 * MGMN200-G Carbide Inserts
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

SHB16/20 Model Small Bore Inner Hole Turning Tool Holder Carbide Boring Bar New
Details:
Condition: 100% brand new and high quality
Material: Carbide
Model: SHB16-6/ SHB20-3/ SHB20-5/ SHB20-6/ SHB20-7/ SHB20-8/SHB2010 (please select)
Color: Black Silver (As Picture Show)
Package Contents:
1 * Turning Tool Holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Mesh BGA planting platform kit Paste Balls Station Kit Reballing Protable
Features:
100% brand new and high quality
This group includes planting platforms, steel mesh, tin balls, Allen wrenches, brushes, scrapers, etc.
The metal plating structure is light, durable and accurate in carrying capacity.
The high-precision BGA general mold can be directly heated.
The ball planting platform can be used in combination with different ball planting steel nets, and BGA balls of different sizes can be planted.
Suitable for various IC and BGA rework kits.
It is easy to operate and use with an Allen wrench and other accessories.
Product parameters:
Project type: BGA planting station kit
Material: metal
Size: as shown
Color: silver
Quantity: 1 set
The package includes:
1 set * BGA planting platform kit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

BGA planting platform kit Reball Solder Station Kit Reballing Protable
Features:
100% brand new and high quality
This group includes planting platforms, steel mesh, tin balls, Allen wrenches, brushes, scrapers, etc.
The metal plating structure is light, durable and accurate in carrying capacity.
The high-precision BGA general mold can be directly heated.
The ball planting platform can be used in combination with different ball planting steel nets, and BGA balls of different sizes can be planted.
Suitable for various IC and BGA rework kits.
It is easy to operate and use with an Allen wrench and other accessories.
Product parameters:
Project type: BGA planting station kit
Material: metal
Size: as shown
Color: silver
Quantity: 1 set
The package includes:
1 set * BGA planting platform kit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Plasma Cutter Parts Plasma Cuttings Torch Kit For PT-31XL CT312 CUT-4 Use
Warm Tip: Electrodes with two different color,random delivery, Please make sure you do not mind before you bid.
Features:
High quality and long service life.
Region free and easy to use.
Good thermal conductivity.
High mechanical strength.
Long service life.
Specification:
Tips and Electrodes: Red Copper
Shielded-cup and Swirl Ring: Porcelain
Application:
For PT-31XL Cutting Torch
Can work with ESAB/L-TEC PT-31, AG-40,JG-40 and WSD-LG40 Cutting Torch suitable for the use of 30A current under high frequency plasma cutting machine, cutting 10mm following iron
These torches for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312,CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.
Package Contents:
10 * Electrodes Ref No: 20862
10 * Tips / Nozzles Ref No: 21008
2 * High-grade Shield Cups Ref No: 18204
2 * Swirl Ring Ref No: 20463
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Torch Electrodes Nozzle Tips Plasma-Cutter Machine Consumables For AG60 SG55
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The ceramic cup has good thermal conductivity and long service life.
*60A torch electrode nozzle nozzle plasma cutting machine consumables for AG60 / SG55
Specification:
Optional Quantities: 18pcs/26pcs/30pcs/40pcs/80pcs
18pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 18
26pcs AG60 / SG55:
*Fit for AG60, SG55 cutting torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 26
30 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
40 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
80pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
Package Contents(Optional):
Package Contents 1:
6 * Electrodes
6 * Nozzles
6 * Ceramic Cups
Package Contents 2:
10 * Electrodes
10 * Nozzles
3 * Ceramic Cups
3 * Isolation Blocks
Package Contents 3:
10 * Electrodes
10 * Nozzles
10 * Ceramic Cups
Package Contents 4:
15 * Electrodes
15 * Nozzles
10 * Ceramic Cups
Package Contents 5:
30 * Electrodes
40 * Nozzles
10 * Ceramic Cups
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Torch Electrodes Nozzle Tips Plasma-Cutter Machine Consumables For AG60 SG55
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The ceramic cup has good thermal conductivity and long service life.
*60A torch electrode nozzle nozzle plasma cutting machine consumables for AG60 / SG55
Specification:
Optional Quantities: 18pcs/26pcs/30pcs/40pcs/80pcs
18pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 18
26pcs AG60 / SG55:
*Fit for AG60, SG55 cutting torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 26
30 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
40 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
80pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
Package Contents(Optional):
Package Contents 1:
6 * Electrodes
6 * Nozzles
6 * Ceramic Cups
Package Contents 2:
10 * Electrodes
10 * Nozzles
3 * Ceramic Cups
3 * Isolation Blocks
Package Contents 3:
10 * Electrodes
10 * Nozzles
10 * Ceramic Cups
Package Contents 4:
15 * Electrodes
15 * Nozzles
10 * Ceramic Cups
Package Contents 5:
30 * Electrodes
40 * Nozzles
10 * Ceramic Cups
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Torch Electrodes Nozzle Tips Plasma-Cutter Machine Consumables For AG60 SG55
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The ceramic cup has good thermal conductivity and long service life.
*60A torch electrode nozzle nozzle plasma cutting machine consumables for AG60 / SG55
Specification:
Optional Quantities: 18pcs/26pcs/30pcs/40pcs/80pcs
18pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 18
26pcs AG60 / SG55:
*Fit for AG60, SG55 cutting torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 26
30 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
40 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
80pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
Package Contents(Optional):
Package Contents 1:
6 * Electrodes
6 * Nozzles
6 * Ceramic Cups
Package Contents 2:
10 * Electrodes
10 * Nozzles
3 * Ceramic Cups
3 * Isolation Blocks
Package Contents 3:
10 * Electrodes
10 * Nozzles
10 * Ceramic Cups
Package Contents 4:
15 * Electrodes
15 * Nozzles
10 * Ceramic Cups
Package Contents 5:
30 * Electrodes
40 * Nozzles
10 * Ceramic Cups
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Torch Electrodes Nozzle Tips Plasma-Cutter Machine Consumables For AG60 SG55
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The ceramic cup has good thermal conductivity and long service life.
*60A torch electrode nozzle nozzle plasma cutting machine consumables for AG60 / SG55
Specification:
Optional Quantities: 18pcs/26pcs/30pcs/40pcs/80pcs
18pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 18
26pcs AG60 / SG55:
*Fit for AG60, SG55 cutting torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 26
30 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
40 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
80pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
Package Contents(Optional):
Package Contents 1:
6 * Electrodes
6 * Nozzles
6 * Ceramic Cups
Package Contents 2:
10 * Electrodes
10 * Nozzles
3 * Ceramic Cups
3 * Isolation Blocks
Package Contents 3:
10 * Electrodes
10 * Nozzles
10 * Ceramic Cups
Package Contents 4:
15 * Electrodes
15 * Nozzles
10 * Ceramic Cups
Package Contents 5:
30 * Electrodes
40 * Nozzles
10 * Ceramic Cups
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Torch Electrodes Nozzle Tips Plasma-Cutter Machine Consumables For AG60 SG55
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*The ceramic cup has good thermal conductivity and long service life.
*60A torch electrode nozzle nozzle plasma cutting machine consumables for AG60 / SG55
Specification:
Optional Quantities: 18pcs/26pcs/30pcs/40pcs/80pcs
18pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 18
26pcs AG60 / SG55:
*Fit for AG60, SG55 cutting torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
*Total: 26
30 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
40 AG60 / SG55:
*Applicable to AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
80pcs AG60 / SG55:
*Fit for AG60, SG55, ICUT60, LTP5000D, LTP6000, LTPDC2000D, CUT-60, LGK-60, CUT50P, 50DX, 50RX, 520D torch
*Material: Metal Ceramic
*Rated Welding Current: 60A
Package Contents(Optional):
Package Contents 1:
6 * Electrodes
6 * Nozzles
6 * Ceramic Cups
Package Contents 2:
10 * Electrodes
10 * Nozzles
3 * Ceramic Cups
3 * Isolation Blocks
Package Contents 3:
10 * Electrodes
10 * Nozzles
10 * Ceramic Cups
Package Contents 4:
15 * Electrodes
15 * Nozzles
10 * Ceramic Cups
Package Contents 5:
30 * Electrodes
40 * Nozzles
10 * Ceramic Cups
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Inserts APKT1604PDFR-MA3H01 Milling Set Tools Equipment Corrosion resistant
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* High hardness, high wear resistance, wide processing range and long service life.
* Sharp, ground and polished.
* No stick cutter, machined surface and high brightness.
* Corrosion resistant, widely applicable.
* Applies to: aluminum, aluminum alloy, copper and other non-ferrous metals and alloys
Specification:
* Model: APKT1604PDFR-MA3 H01
* Color: Silver(As pictures show)
* Material: Metal
* Size: 16mm(Approx.)
Package Contents:
10 * APKT1604PDFR-MA3 H01 Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

26pcs/kit Consumables Plasma Cutter Torch Tips Electrode Parts Kit AG-60, SG-55
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
Plasma Cutter Torch Consumables
Type: Plasma Cutter Consumables Kits
PL60 kit for LTP5000D LTP5000 LTPDC2000 LTPDC2000D
Material: Metal Porcelain
Dimensions(Approx.):
Bracket: 25MM * 25MM (Diameter * Height)
Porcelain Nozzle: 14MM * 20MM * 22MM (Top Diameter * Bottom Diameter * Height)
Electrode: 25MM * 6MM (Length * Diameter)
Conductive Nozzle: 12MM * 20MM (Diameter * Height)
AG60-E Plasma Cutter Electrodes Reference Number: WSP-04004
AG60-N Plasma Cutter Tips Nozzle Reference Number: WSP-04005
AG60-SS Plasma Cutter Shield Cup Reference Number: WSP-04006
AG60-SG Plasma Cutter Standoff Guide Reference Number: WSP- 04007
Package Contents:
10*AG60-E Plasma Cutter Electrodes
10*AG60-N Plasma Cutter Tips Nozzle
3*AG60-SS Plasma Cutter Shield Cup
3*AG60-SG Plasma Cutter Standoff Guide
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5pcs Hand Drill Bits With 5pcs Screw Extractor Equipment Right Hand Tools Set
Item Details:
*100% Brand new and high quality
*Take the screw to easily remove screws, studs, bolts and other accessories
*Improve durability and service life
*When applying torque, the spiral groove on the screw extractor can penetrate the screw to increase the grip
*Use metal box collection tool for easy carrying
*Use high quality materials for durability
*Easy to install and easy to use
*10 PC screw extractor and cobalt drill kit, right hand drill
*5 multi-slot. Machined alloy steel screw extractor: #1-#5
*5 cobalt drill bits: 5/64", 7/64", 5/32", 1/4", 19/64"
Package Contents:
5*Hand Drill Bit
5*Screw Extractor
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Spacing Ring Drill Bit Oblique Hole Positioner Aluminum Alloy 2-ways 14pcs
Details:
*100% brand new and high quality.
*Very fast and accurate hardware tool to drill the 15° angle holes, and bury the screws for screw stealth.
*Mini size, one hand grasp, DIY carpentry tools & 2-ways oblique holes for accurate screw joints.
*Convenient and easy for quick drilling inclined holes to hide the screws in wooden furniture.
*Easy to Adjust - Easily change between pairs of 6/8/10mm drill bits drive adapter, used for any wood type, position and angle.
*Product Usage - Use with clamps and drill bits (Included) to create or repair invisible wood joints.
*Material: Aluminum Alloy
*Main Color: Grey(As Pictures Show)
*Size: Approx. 67x38x18mm/2.64x1.50x0.71inch
*Oblique Hole Size: Approx. 6/8/10mm
*Quantity:14pcs/set
Package Contents:
1* Pocket hole jig
3* Wood Drill
3* Spacing Ring
6* Drill Bit Adapter
1* Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6mm shank Drill set CNC 5 pcs Accessories Tool 8mm Rotating point burr New
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High strength and hardness
*Easy to use and safe
*Reduce labor intensity
*High degree of finish, can calculate the high precision of various shapes of cavities.
*10 times more durable than high-speed steel tools, 200 times more durable than small grinding wheels
*Use with handheld electric or pneumatic tool drivers (also for machine tools)
*The speed of electric or pneumatic tools is usually 6000-50000 revolutions per minute
*Processing various metals (including various quenched steels) and non-metals (such as marble, jade), the processing hardness reaches *For most jobs, it can be replaced with a smaller grinding wheel, and there is no dust pollution
*Used to clean the trimming, lines and welds of castings, forgings and weldments; complete various metal molds; impeller after finishing; various mechanical parts chamfering, round groove processing; mechanical parts inner hole surface finishing; The process of various metal and non-metal sculptures.
Specifications:
*Material: Tungsten carbide
*Blade diameter: about 8mm
*handle diameter: about 6 mm
*Handle length: about 40 mm
*Total length: 50-60mm
Package Contents:
5 *Tungsten carbide rotary burr bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Set Collet Chuck 10Pcs ER16 Engraving Milling Lathe 1mm-10mm Practical
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Selected high quality carbon steel. Hardened and precision ground.
* Large clamping force and large clamping range, widely used in machining centers, ordinary milling machines, CNC milling machines, engraving machines, high-speed machines, etc. (Used with ER16 nuts.)
* 10Pcs ER16 1mm-10mm Collet Set CNC Milling Engraving Tool
Specification:
* Name: Collet Chuck
* Model: 120259
* Type: Machine Tool Accessories
* Applicable Machine: CNC Machine
* Precision: 0.008mm
* Model: ER16 (10pcs, 1mm-10mm)
(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)
The Correct Way To Install The Collet Nut:
1.Put the chuck into the pressure cap, and gently turn the clamping spring. When the pressure is eccentric, the groove on the cover is a clamping spring groove. Push the clamp spring in the direction of the arrow and use equal force to install the pressure cover.
2.Install the clamping spring and cover on the chuck body or spindle together. After inserting and clamping after wiping the cylindrical handle, use a wrench to tighten the pressure cap until the tool is firmly clamped before use.
(Caution: Avoid tightening the pressure cap of the unmounted tool to avoid damaging the clamping spring)
3.Use a wrench to loosen the pressure cover, remove the chuck or tool, and remove the tool. Push out the clamping spring in the direction of the direction arrow. Then replace other clamping springs as needed.
Package Contents:
10 * ER16 Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
Precision R8 round chuck drawbar thread 7/16"-20 hardened and ground 1/8" -7/8"
7/16""-20 tie rod thread
Precision ground to close tolerance
The entire surface is hardened and polished
Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1 / 2, 17 / 32, 9 / 16,
19 / 32, 5 / 8, 21 / 32, 11 / 16, 23 / 32, 3 / 4, 25 / 32, 13 / 16, 27 / 32, 7/8 (optional)
Weight: about 13 ounces
Dimensions: 1-1/4 inches long x 1-1/4 inches wide x 4 inches high*
Package list:
1 *R8 round chuck tow bar
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.