Kategóriák

Descriptions:
The bore gauges are used to measure internal dimensions of work pieces by comparative method.These series bore gauges are equipped with a good guiding protective bridge which can be self-centering exactly and reliably,and measuring range is 50-160mm
Features:
The bore gauges are used to measure internal dimensions of work pieces by comparative method.
These series bore gauges are equipped with a good guiding protective bridge which can be self-centering exactly and reliably.
The moveable anvil on one side and an interchangeable on another side , which serves for setting the bore diameters.
This dial bore gauge 's measuring range is 50-160mm
Easy to measure, and with high accuracy, which is 0.01.
Specifications:
Material: metal
Type: inner diameter scale
Measurerange:50-160mm
Accuracy: 0.01
Weight:1211g
Package Include:
1 x Gauge Rod
1 x Gauge Head
5 x Measuring Rod
1 x Screw Washer
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:1. Handheld design and portable styling, which is convenient to use and carry.
2. High sensitivity, which has no false alarm, the measuring range is from 30-130dBA, it will provide an most accurate data for you.
3. LCD display screen, it has high definition, which is convenient to read data.
4. Multifunctional style, which can meet different needs, convenient for using.
5. Suitable for various , suitable for sound quality control in factory, office, home, school and construction site, etc.
Specification:Condition: 100% Brand New
Material: ABS
Accuracy: ±1.5dB
Measuring range: 30-130dBA
Frequency weighting: A and C.
Time Weighting: Fast Speed and Slow Speed
Operating Environment Conditions: The height is below 2000 meters
Measurement Grade: 30-130dB (A), 35-130dB (C)
Grade Range:30 to 80 decibels
50 to 100 decibels
60 to 110 decibels
80 to 130 decibels
30 to 130 decibels
Accuracy: ± 1.5db (under reference conditions)
Resolution: 0.1db
Frequency Range: 31.5hz - 8.5khz
Linear Range: 50dB / 100dB
Bar Chart: Steps 50dB scale with 1dB for monitoring current sound pressure level
Sampling Rate: 20 times/second
Number Display: 4 digits
AC Signal Output: FS output impedance is about 0.707Vrms.600 Ω (ohm)
DC Signal Output: 10mV/dB, about output impedance.100 Ω (ohm)
Time Weight: Fast/slow
Microphone: 1/2in electronic capacitor microphone
Maximum Holding Function: Yes
Working Conditions: 0-40°C, Relative Humidity 10- 80%
Storage Conditions: -10-60℃, 10- 70% RH
Power Supply: 4x AA 1.5v battery (Not Included)
Size: Approx. 256 x 70mm/10.1 x 2.8in
Package List:1 x Sound Level Meter
1 x USB
1 x Connecting Line
1 x Instruction Book

Feature:1. Made of 40cr alloy steel, the product can withstand high pressure and explosion.
2. The collect chuck tool is featured with quality assurance, long service life.
3. With excellent price and high cost performance, the product is a good choice for you.
4. The tool is characterized by high accuracy and excellent performance.
5. You can use this collect chuck tool on various kinds of CNC milling machines.
Specification:
Item Type: Collet chuck tool .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Model: BT40-ER20-100
Clamping Range: Approx. 1-13mm / 0.04-0.5in
L Length: Approx.100mm / 3.9in
Material: 40cr
Package List:1 x Collet Chuck Tool

EA04C Automatic Voltage Regulator Controller Single Phase Generator Spare Parts
Features:
High quality EA04C voltage regulator, stable and reliable performance.
The potentiometer adjustment is smooth and not easy to damage.
High resistance , wide range of operating temperature, small drift stability.
Adopting high-quality capacitors, good consistency of parameters, high reliability.
Professional manufacturing, exquisite workmanship, high reliability.
Specification:Test input: voltage 160-265 VAC/300-550 VAC single phase
Power Input: voltage 90-240 VAC single-phase two-line
Magnetic field output: maximum 63VAD at input voltage of 120VAC
Current: continuous 4A, non-continuous 7A within 60 seconds
Package List:1* Automatic Voltage Regulator

Feature:1. Brand new enclosure case, and it can protect your electric devices from damage.
2. The case is made of aluminum alloy material, after oxidation sandblasting processing, the is with strong luster, not easy to rust.
3. Effective heat dissipation: Since there is no fan, it has passive heat dissipation. Built‑in heat column, the shell can be equipped with a cooling fan and built‑in heat column to make heat dissipation more effective.
4. The enclosure case is compatible for 3 Model B for 3 Model B .
5. This enclosure is easy to install and has good ventilation. It's good for your DIY project and help to cooling your device.
Specification:
Item Type: Enclosure box
Material: Aluminum alloy
Color: Golden
Compatible: for 3 Model B for 3 Model B
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Upper Shell
1 x Lower Shell
1 x Accessories Bag
Note:Not including for Raspberry Pi

Feature:1. 8 Jewels shockproof dial indicator with clear scale for easy reading.
2. Made of stainless steel with good wear and corrosion resistance.
3. Carbide probe, corrosion resistance, high hardness.
4. With jewel bearing support, it has higher sensitivity than ordinary dial gauge.
5. High- testing equipment, high sensitivity, reliable accuracy, easy to use and maintain.
Specification:
Condition: 100% Brand New
Item Type: Dial Indicator
Material: Stainless Steel
Measuring Range: 0-1mm
Resolution: 0.001mm
Dial Diameter: 58mm
Reading Value: 0.001mm
Role: Mechanical measurement
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Dial Indicator

Features:
100% brand new and high quality.
This pressure transducer uses silicone sensor.
Light weight and small size, convenient to install and operate.
It can measure gauge pressure, absolute pressure and negative pressure.
Works for gas, liquid and steam which are not corrosive to stainless steel.
Specification:
Type: Silicone pressure transducer
Measuring Fluid: Gas, liquid and steam (which is non-corrosive to stainless steel)
Measuring Range: 0~1.6MPa
Accuracy: 0.2% , 0.5%
Output Signal: 4~20mA DC or 1~5VDC (normal 4~20mA DC)
Overload Capacity: <1.5 times of measuring range
Temperature Drift: 0.02% FS/℃
Power Supply: 12~36VDC (normal 24VDC）
Fluid Temperature: -40~150℃
Ambient Temperature: -30℃~80℃
Ambient Humidity: <85% RH
Load Resistance: ≤1000Ω
Weight: 283g / 10oz (approx.)
Package list:
1 * Pressure Transducer

Features:
tool post and set is main accessory for common mini lathe, consisting a tool post and several cutter holders.
Use proper cutter according to the needs of machining workpiece. They can be used for cylindrical turning, facing, cutting, knurling, drilling and reaming, boring, etc.
It implements external cutter installation, and features , high precision and high rigidity.
It is a great tool to replace traditional squaretool post and fast turning.
Wide fitting, this set of tool post and cutter holders can be used for many type of mini lathes.
Specifications:
Material: Aluminum
Color: Black, silver
Size: As picture
Weight: 700g(approx.)
Package Includes:
1 x Tool Post
4 x Cutter Holders
2 x Screws
2 x Hex Keys
4 x Set Screws

BT40-ER25-100 CNC Tool Holders Hardware Accessory Industrial Supplies 40cr Xi
Feature:1. Made of 40cr alloy steel, CNC tool can withstand pressure and explosion, durable.
2. Adopts quality assurance, lathe tool supports long service life, which can be easy to use in the practical life.
3. Suitable for ER25‑UM chuck, choose according to your needs, and CNC tool meets your practical needs.
4. Hardened for maximum accuracy and long durability, this milling tool is very suitable for boring machines.
5. Via professional manufacturing, CNC tool quality is guaranteed, you can use it with confidence.
Specification:
Item Type: CNC tool
Model: BT40-ER25-100
Clamping Range: Approx. 2 ~ 16mm / 0.1 ~ 0.6in(ER25)
Length: Approx. 100mm / 3.9in
Material: 40cr
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x CNC Tool

Feature:1. Removable stainless steel hooks and shackles for easy cleaning and maintenance.
2. When the capacity exceeds the limit, the scale will warn you with a safe overload indication.
3. Large LCD display with soft black backlight, oversized font and bold numbers.
4. Data can be easily recorded even in dim areas.
5. Tare deduction, locking, zeroing, automatic shutdown, low power indication and overload protection.
Specification:
Condition: 100% Brand New
Item Type: Crane Scale
Color: Shown as Picture
Weight Capacity: Approx. 0.1kg-200kg/0.22-440.9lb
Unit: kg, lb/N
Display: Digital LCD Display
Function: Tare Deduction, Locking, Zeroing, Automatic Shutdown, Low Power Indication and Overload Protection
Material: ABS Stainless Steel
Power Supply: 2 x CR2032 (Included)
Size: Approx. 150 x 65 x 33mm/5.9 x 2.56 x 1.3in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x Crane Scale
2 x Hook
1 x Manual

Features:1. Adopt energy-saving fingerprint sensor and power management function, make the product perfect.
2. 1.8-inch TFT screen, simple and intuitive.
3. USB flash drive download USB communication.
4. No software, T9 input method editor, machine name, department, frequency and other information, can output attendance report directly, user operation is simple.
5. Ergonomic , simple and elegant appearance.
Specifications:Material: ABS
Display screen: 1.8-inch TFT color screen
Core chip: ARM9 120MHz
Fingerprint number: 2000
Identification : 100 pieces /min
Record capacity: 100,000
Operation button: 4 * 4 buttons
Communication: USB flash drive
Report function: Support the automatic generation of card report.
Working power: DC 5V/1A
Specifications: American gauge(USS), British system(BS), European standard(VDE) (optional)
Size: Approx. 17.5 * 12 * 4 cm / 6.9 * 4.7 * 1.6 in
Weight: 300 g
Package Include:1 x Attendance Machine
1 x Adapter
1 x Compact Disc
1 x Screw Kit

Feature:1. Made of high-quality aluminum and plastic material, it is not easily broken and is durable in use.
2. Suitable for of European standard, fit for bottle with T21x4 thread.
3. Carbon dioxide mini gas regulator, 0-90PSI, suitable for soda water or for 6ac-6g soda thread.
4. After disconnecting, connect an 8mm barb to the barrel and set the discharge pressure with CO2 line.
5. The high-end regulated charger is compact in size, but enough to accommodate a very small regulator.
Specification:
Condition: 100% Brand New
Item Type: CO2 Gas Regulator
Material: Aluminium Plastic
Thread: T21x4
Pressure: 0-90PSI
Hose Length: Approx. 1.5m / 4.9ft, 5/16in inner diameter hose
Weight: Approx. 454g / 16oz
Instruction:The 5/16in gas line assembly is made of 1.5m 5/16in tubing attached to a ball lock disconnect. Simply clamp the open end of the tubing to your regulator or CO2 distribution block and hook up the disconnect fitting onto your keg and you can pressurize and dispense your home brewed beer. This gas line comes completely assembled with one loose clamp to attach your gas line.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Mini Gas Regulator
1 x 1.5m 5/16in ID Hose
1 x Quick Connector
1 x Stainless Steel Clamp
1 x Ball Lock Disconnect - Gas

DC 12V 8 Channel Relay Switch Module Board Controller with Metal Housing USB 10A
Feature:1. Onboard square USB interface, stable connection, double high current track.
2. Fine workmanship, adopts imported high performance USB control chip.
3. Military printed circuit board manufacturing, additional printed circuit board opening can achieve better voltage isolation.
4. Made of high quality material, sturdy, durable and long service life.
5. Small size and lightweight, easy to carry and store, convenient to use.
Specification:
Condition: 100% Brand New
Item Type: Module
Material: Printed Circuit Board
Optional Color: Silver, Black
8 Channel SPDT Relay SRD-12VDC-SL-C
Relay Specification: 10A 250VAC / 10A 125VAC / 10A 30VDC / 10A 28VDC
Power Supply: 12 VDC
Current Consumption: 300 mA
Printed Circuit Board ParameterFor FR4/1.5mm /Two-Layer/Metalizing Hole/HAL/White Stamp/Solder Resist
Weight: Approx. 222g
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Module
1 x Metal Shell
1 x Screw Kit

Features:1. Features high , high sensitivity, high stability, and durable in use.
2. Multi-channel junction box, aluminum alloy casing, good anti-interference.
3. Dedicated to waterproof sealing joints, waterproof rubber gasket for cover, waterproof and dustproof.
4. Easy to assemble and debug, high reliability.
5. Simultaneous sensitivity matching adjustment mode, each output can be balanced to prevent damage to the sensor caused by inductive and surge signals.
Specification:Condition: 100% Brand New
Item Type: Load Cell Transmitter
Multiple input: 0~20mV
Single output: 0~20mV
Accuracy: ≤±0.1% F.S
Supply voltage: 5~15VDC
Working temperature: -20~85°C
Protection level: IP67
Package List:1 * Load Cell Transmitter

4" LCD Display IPS Capacitive Touch Screen Monitor 480x800 for Raspberry Pi B/B
Feature:1. With volume and backlight adjustment buttons, the operation is more convenient.
2. IPS technology, high quality and very wide viewing angle display effect.
3. Designed for Raspberry Pi Model B/B , it is an excellent alternative to HDMI monitor.
4. IPS capacitive touching screen, 170° viewing angle.
5. Five‑point touching type, very convenient to use.
Specification:
Condition: 100% brand new
Item type: 4in Display Screen
Material: for PCB, tempered glass
Color: As picture shown
Weight: Approx. 105g
Size: Approx. 4 inches
Resolution: 480x800
Screen type: IPS capacitive touching screen, 170° viewing angle
Touching type: five-point touching
Equipped with volume adjustment, backlight adjustment buttons, headphone jack, speaker, reserved for SPI control interface, 40PIN GPIO interface
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Display Screen

Valves QA61F‑DN20‑25C 200℃ Ball Valve for Commercial Plumbing Irrigation
Feature:1. One‑piece molding without burrs, smoothly and smoothly installation.
2. Use 20# steel pipe, coated with anti‑corrosion paint, anti‑corrosion and oxidation resistance.
3. Low temperature resistance, large diameter and large flow rate, greatly improving the scope of application.
4. Great workmanship, perfect replacement for the old one, has a long service life.
5. Convenient to use and with good performance, with small size, easy to carry and store.
Specification:
Item Type: Ball Valve
Material: 20# steel pipe
Model: QA61F-DN20-25C
Color: Blue
Caliber: DN20
Medium: Water, steam
Applicable Temperature: 200℃
Pressure: 2.5Mpa
L: Approx. 230mm / 9.1in
D: Approx. 20mm / 0.8in
D1(A/B): Approx. 26.9mm / 1.1in/25mm / 1in
D2: Approx. 48.3mm / 1.9in
H: Approx. 130mm / 5.1in
B: Approx. 170mm / 6.7in
H1: Approx. 48mm / 1.9in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Ball Valve

This product is composed of a brass valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that will de-energize the valve when it is opened or , safe and energy-saving. It is applicable for the fan coil and water control system of air conditioner.
Features:
1. Forged by high quality brass, the ball valve is durable and reliable.
2. Built-in actuator de-energize the valve when it is opened or , safe and energy-saving.
3. The product occupies little external space and can be installed close to the wall.
4. structure, tight close, no leakage.
5. Mainly used for the fan coil and water control system of air conditioner.
Specification:
Valve Material: Brass
Power Supply: AC 220V
Power: 6W
Thread: DN40 -1/2"
Suitable Medium: Cold water, hot water or 60% ethanol
Medium Temperature: 2~95℃
Nominal Pressure: 1.6MPa
Allowable Pressure Difference: 1MPa
Wiring Method:
Double Color Wire(SR): Neutral line,
Blue Wire (BL): Open valve,
Brown Wire (BR): Close valve
Weight: 1018g/35.9oz
Package list:
1 * Motorized Ball Valve

Feature:1. Used to press the wire end ferrule for horizontal supply, if the sleeve is not tight, the pressure ratchet can be adjusted.
2. It has an adjustable ratchet structure and leverage to reduce labor effort.
3. The handle has a large holding position, a light and compact structure, and the handle design ensures a perfect crimping effect.
4. A sorted storage transparent box is convenient for accessing various wire terminals.
5. This is a crimping tool used to insulate electrical connectors, fix the wire connector, and at the same time insert the wire into crimping.
Specification:
Condition:100% Brand New
Item Type: Wire Crimping Tool Set
Wiring Pliers: Approx. 22.5 x 7.4 x 2cm/8.9 x 2.9 x 0.8in
Tool Box Size: Approx. 23 x 12 x 4.2cm/9.1 x 4.7 x 1.7in
Scope of Application: Crimping tool for insulating electrical connectors, fixing wire connectors, and inserting wires into crimping.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Crimping Tool
1 x Set of Tool Box ( M4 x 160 (red x 80, blue x 60, yellow x 20)
140 x (red x 70, blue x 50, yellow x 20)
110 x M6 (red x 50, blue x 40, yellow x 20)
90 x Butt Splice (red x 40, blue x 30, yellow x 20)
45 x Male (red x 20, blue x 15, yellow )
45 x Female (red x 20, blue x 15, yellow x 10)
30 x Spade 250 Male (semi‑insulated (red x 10, blue x 10, yellow x 10)
30 x Spade 250 Female (semi‑insulated) (red x 10, blue x 10, yellow x 10)
50 x Spade 250 Female (fully insulated (red x 20, blue x 20, yellow x 10))

Feature:1. Suitable for most guitars, such as electric guitars, acoustic guitars, electric bass, etc.
2. Used to suppress the piano, suitable for craftsmen and music companies
3. Made of metal and wood, has a good hand feeling and is easy to operate.
4. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
5. The combination of blue and silver, simple and beautiful, both beautiful and practical
Specification:
Item Type: F Clamp
Compression Tool Color: Blue, silver
Material: Metal, wood
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x F Clamp
1 x Wood
1 x Wrench

Feature:1. With Ni Cu Ni three-layer coating, the magnetic force is strong and permanent
2. Epoxy resin is used instead of the original plastic to make it more tight and provide protection for the magnet, helping to prevent chipping or cracking.
3. With double-sided magnetism, strong magnetic force and high bearing capacity
4. Magnetic is better used for magnet fishing, lifting, hanging, retrieval and industrial use
5. Strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: Salvage Magnet
Material: Magnet
Maximum Load-Bearing: 441LBS / 200KG (the adsorbed iron is flat, without unevenness, and the thickness is more than 3cm to the maximum load-bearing tension)
Magnetic Level: N35
Diameter: Approx. 75mm / 3in
Thickness: Approx.25mm / 1in
Weight: Approx. 902 g / 31.8 oz
Salvage Rope Length: Approx. 20 meters / 65.6ft
Salvage Rope Color: Red
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Double-Sided Salvage Magnet
1 x 20 Meters Salvage Rope

Features:
1. This is a cutting torch complete set that is composed of premium parts.
2. cutting is characterized with high cutting , high , good cutting effect and small thermal deformation.
3. The rated current is 40A.
4. Universal cutting torch for CUT40, LGK40, CT312, CT416 and other 40A cutter.
5. Widely used in automobiles, chemical machinery, engineering machinery, ship and other fields.
Specification:
Rated Current: 40A
Working Pressure: 4.5-5.5 bar
Duty Cycle: 60%
Length: 4m / 13.1ft
Weight: Approx. 1280g / 45.1oz
Package list:
1 * Cutting Torch

Features:
This thermoelectric cooler uses 12715 refrigeration module which has better cooling effect.
Cooling block has large area that can contact more air for quick cooling.
Four hollow copper pipes with refrigerant would deliver heat fast for higher cooling efficiency.
It can be used to make small fridge, mini air conditioner or cooling device for pet.
Tested with a 10L foam box that 23℃ can drop to 0.6℃ in half an hour, minimum to -2℃.
Specifications:
Cooler Size: 12*19.5*12cm
Fan Size: 6*6cm
Power: 180W
Power Supply: DC12V, 20A (not included)
Max. Cooling Volume: 20L (5 to 8℃ lower than room temperature)
Weight: 840g(approx.)
Package Includes:
1 x Thermoelectric Cooler

Pneumatic Cylinder High Quality Air Cylinder Clamping Devices for Manipulators
Feature:1. Thin cylinder has the advantages of compact structure, light weight and small space occupation.
2. Mainly features with short axial size, short stroke, compact size, and large output force.
3. Suitable for situations with small space and is widely used in manipulators and various clamping devices.
4. The nature of the work is extremely stable, and the use process is simple, greatly improving the work efficiency.
5. Easy and simple installation, no any complex tools, offering you much convenience.
Specification:
Condition: 100% brand new
Item Type: Thin cylinder
Material: Stainless steel
Color: As pictures shown
Specifications: SDA80X40
Bore Diameter: Approx.80mm / 3.1in
Stroke: Approx.40mm / 1.6in
Working Medium: Air
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Cylinder

Feature:1. The milk collector is a container with several manifolds, which enables the milk cups to be installed at intervals, forming a milk cup group, and connecting the milk cups with long pipes and long pulsating pipes.
2. With stainless steel base, it is durable and is an important part of milking machine.
3. Equipped with buckle, easy to install and take, it is a perfect tool for farm breeding.
4. High quality PC material, wear-resistant, with good durability and stability.
5. Exquisite workmanship, stable performance, simple installation, suitable for cattle and sheep.
Specification:
Condition: 100% Brand New
Item Type: Milking Claw
Material: Stainless Steel, PC
Capacity: 300cc
Applicable Object: Sheep, Cattle
Purpose: Milk Machinery
Weight: Approx. 537g / 18.9oz
Size: Approx. 16x10x15cm / 6.3x3.9x5.9in
Milk Pipe Nozzle: Approx. 2cm / 0.8in
Lining Port: Approx. 1.3cm / 0.5in
Air Port: Approx. 0.95cm / 0.4in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Milking Claw
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:
1. Supports oxidation treatment surface, aluminum box with beautiful appearance adopts mechanical die casting integrated molding.
2. Using high-quality aluminum, durable aluminum shell supports good heat dissipation for good signal shielding performance.
3. Professional, aluminum enclosure case is in compact structure, easy to use, not easy to damage.
4. Improved for more durability, this kind of auminum box is built to strict quality control standards.
5. This auminum case can be fit for heat dissipation aluminum shell of electronic products, PCB junction box, etc.
Specification:
Item Type: Aluminum box
Material: Aluminum alloy
Size: Approx. 80 x 160 x 300mm / 3.1 x 6.3 x 11.8in
Aluminum Box Thickness: between approx. 1.25 ~ 1.5mm / 0.05 ~ 0.06in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Case
1 x Front Profile Bracket
1 x Rear Profile Bracket
8 x Screw
Note:
For manual measurement, please allow 1-3mm error. Thank you for your understanding.

Features:
1. This is a clamp multimeter to accurately measure AC DC current/voltage, frequency, resistance, capacitance and temperature.
2. 6000 counts LCD screen displays the measuring data clearly and intuitively.
3. 8 selection manual function knob.
4. Non-contact voltage (NCV) detection, safe and practical.
5. More functions: Continuity test, data hold, low battery indication, auto power off and more.
Specification:
Specification Range Accuracy
DC Voltage 0-660.0V ±(0.5% 3)
AC Voltage(40-65Hz) 0.01-600.0V ±(0.8% 5)
DC Current 10mA-400A ±(3% 3)
400A-600A ±(3.5% 3)
AC Current(40-65Hz) 100mA-400A ±(2.5% 5)
400A-600A ±(3% 5)
Resistance 0-60MΩ ±(0.8% 3)
Capacitance 0.1uF-6000uF ±(3% 3)
Frequency 40Hz-1000Hz
Continuity <30Ω
Low Impedance Voltage 1.0-600V ±(0.8% 3)
DC Current uA 0-200uA ±(0.8% 3)
Temperature -40~1000℃ ±(1% 2)
-40~1832℉ ±(1% 2)
Feature
Display 6000 counts
Auto Range Yes
AC Current 60A/600A
DC Current 60A/600A
AC Voltage 600mV/6V/60V/600V
DC Voltage 6V/60V/600V
Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
Frequency(Clamp) 1kHz
Frequency(Voltage)
1kHz
LPF(1kHz-3dB) Yes
Capacitance 600uF/6000uF
Data Hold Yes
Backlight Yes
NCV Yes
Low Battery Indication
Yes
Auto Power Off
Yes
Dual DIsplay Yes
General Parameter
Brand
PEAKMETER
Model
PM2118
Power Supply 2 x 1.5V AAA batteries (NOT included)
Size 187*65*38mm / 7.3*2.5*1.5in
Package Weight
Approx. 357g/12.6oz
Package list:
1 * Clamp Multimeter
2 * Test Probes
1 * Thermocouple
1 * Black Bag
Note:
1. Due to the difference between monitors and light effects, the pictures may not reflect the actual color of the item.
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.

Features:
1. Made of high-strength diamond-shaped steel wire with high thread strength and high wear resistance.
2. The wire screw set can be placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high .
3. Typical application in high voltage switchgear, microwave communication, automotive parts, aerospace parts, electronic products, air equipment, radiators, etc.
4. Wire thread insert can be used as a repair tool to effectively repair threaded holes
5. All accessories are packed in a box for easy carrying and storage
Specification:
Condition: 100% Brand New
Material: Stainless Steel
Weight: Approx. 329g / 11.6oz
Package List:
20Pcs M3*0.5*2D
20Pcs M4*0.7*2D
20Pcs M3*0.8*2D
20Pcs M3*1.25*2D
20Pcs M3*1.0*2D
5Pcs Drills(M3,M4,M5,M6,M8 in each)
5Pcs Hole Drills(M3,M4,M5,M6,M8 in each)
5Pcs Tap(M3,M4,M5,M6,M8 in each)
1Pcs Installing Handle

Features:
Semiconductor coolers are a form of state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
Application: Fish tank cooling, computer water cooling, circulating water cooling, cooling equipment, etc.
Use to Connect the pump and the power supply.
Diy kits Thermoelectric Peltier refrigeration cooling system.
Fast cooling, outstanding effect.
Simple operation, strong practicability.
Specifications:
Refrigeration piece:
Operating voltage: 12v
Operating Current: 9 A
Operating Power: 108 w
A single fan:
Operating voltage: 12v
Operating Current: 0.2 A
Operating Power: 2.4 w
Connect way: Connect pump and power supply
Application: fish tank cooling, computer water cooling, circulating water cooling, cooling equipment, etc.
Size: 160 * 100 * 90 mm/6.30 *3.93 * 3.54inch
Weight: about 690 g
Note: water cold head color random (blue and silver)
Package Included:
1x Thermoelectric Peltier Refrigeration

Features:2.8" TFT screen, colorization display, wide angle vision up to 180°.
High sensitivity sensor ensures the high accuracy in data collections.
Multipurpose in air quality detection in PM1.0, PM10.0, PM2.5, AQI, temperature, humidity, particulate matter.
Power supply in DC 5V universal, USB socket, car charger, power bank, etc.
Suitable for home, office, car and outdoors.
Specifications:Material: Acrylic Case Electronic Components
Size: Approx. 8.5 x 6.5cm / 3.34 x 2.55inch
Power Supply: DC 5V
Screen: 2.8inch TFT
Weight: Approx. 231g
Package Included:1 x PM2.5 Air Quality Detector
1 x USB Cable
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Tap Die Set 32pcs Hand Tools Set Kit Alloy Steel Portable High Hardness Tap Die
Feature:1. All cutting teeth are processed by precise CNC machining and 60 HRC hardness heat treatment to achieve the best thread processing performance.
2. Industrial bearing steel structure ensures maximum durability of tools.
3. Fine taper taps and dies make tapping easier and smoother and prevent overheating.
4. Small and portable, easy to carry and can be used freely in a narrow space.
5. Including 32pcs of the package, meeting your different demands, wonderful tool set.
Specification:
Condition: 100% Brand New
Item Type: Tap Die Set
Material: Alloy Steel
Size: Approx. 260 x 115 x 33mm / 10.2 x 4.5 x 1.3in
Specification: German standard
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x M3 x 0.5 Die
1 x M4 x 0.7 Die
1 x x 0.8 Die
1 x M6 x 1.0 Die
1 x M8 x 1.25 Die
1 x M10 x 1.5 Die
1 x M12 x 1.75 Die
3 x M3 x 0.5 Tap
3 x M4 x 0.7 Tap
3 x x 0.8 Tap
3 x M6 x 1.0 Tap
3 x M8 x 1.25 Tap
3 x M10 x 1.5 Tap
3 x M12 x 1.75 Tap
1 x Tap Wrench
1 x Die Wrench
1 x Screw Pitch Gauge
1 x Drive Screw

Feature:1. Superior high-speed steel material, sturdy and durable, long service life.
2. Fine workmanship, , provides you with comfortable touch.
3. Accurate designed, precise structure, perfect replacement for old handle.
4. Simple and convenient for installation, easy to use and operate.
5. Conform to strict quality control standards, dependable to use.
Specification:
Condition: 100% Brand New
Item Type: Tool
Material: High-speed Steel
Color: As picture shown
Model: SK40-FMB22-60
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Tool

MT3 Live Center Morse Taper Alloy Tool Steel Live Tailstock Center Accuracy
Feature:1. Accuacy deep ball bearing, thrust bearing and needle bearing combination
2. Longer mandrel can effectively improve cutting performance and reduce vibration
3. The front end has a dust to prevent the accumulation of cutting fluid and dust and prolong the service life of the tip.
4. The mandrel is made of alloy tool steel. After heat treatment, the hardness HRC55 has high wear resistance and concentricity.
5. Unique oil hole design for easy lubrication
Specification:
Item Type: Live Center
Sharpness Shaft Material: GCR15 bearing steel, heat treatment hardness 60
Body Material: 40CR, heat treatment hardness 50
Speed: ≤5000
Accuracy: 0.005
Type: High speed
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Live Center

Feature:1. Used for pruning bonsai fork branches. After the concave cutter are pruned, a concave fish‑shaped incision is left, so that the resin healed by the plant will cover the concave incision, and the traces left by the cutting can not be seen.
2. Made of high quality stainless steel material, durable, wear‑resistant, rustproof.
3. Ergonomic design, easy to handle, suitable for fast and long time pruning.
4. Perfect for all levels of bonsai enthusiasts and beginners.
5. Widely used for garden, flower, plants or bonsai trimming.
Specification:
Condition: 100% Brand New
Item Type: Concave Cutter
Material: Stainless Steel
Color: As shown in the picture
Size: Approx.28x5.5x3cm/11x2.2x1.2in
Maximum Opening Width: Approx.55mm/2.17in
Weight: Approx.440g/15.5oz
Application: Branch Cutter
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Concave Cutter
Note:
1. Please allow 1‑2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Cutter Handle Durable Collet Chuck for Machining Center Industrial Application
Feature:1. Premium high-speed steel material, rugged and antirust, long durability.
2. Fine workmanship, , features delicate and comfortable touch.
3. Accurate designed, precise structure, perfect replacement for old toolholder.
4. Built to meet standard specification, strictly follow factory quality control.
5. Simple and convenient for installation, easy to use and operate.
Specification:
Condition: 100% Brand New
Item Type: Tool
Material: High-speed Steel
Color: As picture shown
Model: CAT40-FMB22-60
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Tool

MT3 Live Center Carbon Steel Live Center Set 60° Milling Machine for CNC Work
Feature:1. Quenched carbon steel material, high toughness and long service life
2. One-piece molding, no burrs
3. The product has high accuracy, easy to operate
4. Professional design, easy and convenient to use
5. Large load capacity, up to 440 pounds
Specification:
Item Type: Live Center
Shank Size: MT3
Maximum Speed: 3000
Accuracy: 0.000197”
Load Capacity: 440 Pounds.
Center Point: 60°
Total Length: 6.95in
Outer Diameter: 1.97in
Large Diameter: 0.94in
Small Point: 0.39in
Point Length: 1.63in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Live Center

Descriptions:
This product consists of a ball valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that allows the valve to be de-energized when fully closed or fully closed. Can be used in air conditioning system and plumbing systems.
Features:
This motorized ball valve is mainly adopted of brass forging, reliable and durable.
Low noise, running noise less than 40dB.
Ball valve and actuator for nut connection Installation, quick disassembly.
Precision structure, close tightly, no leakage.
Can be used in air conditioning system and plumbing systems.
Specifications:Body material: brass
Working temperature: normal temperature
Working medium: water, oil, air
Nominal pressure: 1.6MPa
Connection: thread
Size: G1-1/2" DN40
Weight: 958g
Wiring diagram:
Package Included:
1 x motorized ball valve with cable

This product is composed of a brass valve and an actuator, the actuator is driven by a synchronous motor and has a built-in limit switch that will de-energize the valve when it is opened or . It is applicable for the fan coil and water control system of air conditioner.
Features:
1. Forged by high quality brass, the ball valve is durable and reliable.
2. Built-in actuator de-energize the valve when it is opened or , safe and energy-saving.
3. The product occupies little external space and can be installed close to the wall.
4. structure, tight close, no leakage.
5. Mainly used for the fan coil and water control system of air conditioner.
Specification:
Valve Material: Brass
Power Supply: DC 24V
Power: 6W
Thread: DN40 -1/2"
Suitable Medium: Cold water, hot water or 60% ethanol
Medium Temperature: 2~95℃
Nominal Pressure: 1.6MPa
Allowable Pressure Difference: 1MPa
Wiring Method:
Double Color Wire(SR): Neutral line,
Blue Wire (BL): Open valve,
Brown Wire (BR): Close valve
Weight: 928g/32.7oz
Package list:
1 * Motorized Ball Valve

Feature:1. Pneumatic riveting gun, self-locking designed, can be quickly replaced.
2. Air Rivet Nut Gun adopts original movement, with higher accuracy and longer service life
3. Pneumatic riveting nut gun, easy to operate, greatly improve work efficiency.
4. transmission accessories, bite tight, can prevent damage to the bearing due to shaking.
5. Straight shank riveting gun, riveting stroke: M6-M8 (mm), riveting range: M6 / M8.
Specification:
Item Type: Air Rivet Nut Gun
Brand: KOPO
Product Model: KP-7813
Average Air Consumption: 5CFM
Inlet Size: 1/4 (inch)
Comes With Gun Head Size: M6 / M8 (mm)
Maximum Pull Nail Size: M8 (mm)
Pulling Stroke: M6-M8 (mm)
Working Pressure: 0.65 (Mpa)
Tension: M6 / M8 (kg)
Recommended Inner Diameter Of Trachea: 5 (mm)
Air Re-speed: 600RPM
Total Tool Length: Approx. 315mm / 12.4in
Tool Height: Approx. 41mm / 1.6in
Tool Net Weight: 1.12 (kg)
Riveting Range: M6 / M8
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 X Pneumatic Rivet Nut Gun
1 Set X M8 Nut Chuck
1 Set X M6 Nut Chuck
1 X Hanging
1 X Analysis Drawing

Feature:1. Made of high quality aluminum and plastic material, reliable and durable in use.
2. No need to use adapter, this kit is practical accessory for soda beer keg brewing.
3. Connect it to the keg and set the distribution pressure with the carbon dioxide line.
4. Suitable for Tr21x4 thread and lightweight construction keeps installation convenient.
5. The dial scale is clear and easy to read, and the knob is easy to operate and easy to adjust.
Specification:
Condition: 100% Brand New
Item Type: CO2 Charger Kit
Material: Aluminum Plastic
Connection Thread: Tr21x4 Thread
Hose Length: Approx. 100cm / 39.4in
Weight: Approx. 522g / 18.4oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x CO2 Charger Kit
1 x English User Manual

Features:
100% brand new and high quality.
This is a great pendant switch control for hoist and crane.
Made of sturdy ABS plastic, this switch control is durable.
There are many control buttons on the switch, including emergency stop.
It is safe and reliable, convenient to use, and can be used with one hand.
Specifications:
Material: ABS plastic
Contact Type: Normally open
Button Color: Black, white, with emergency stop
Contact Rated Current: 5A
Working Voltage: 500V
Head IP Rating: IP54
Size: 8*53cm/3.2*20.9in
Weight: 938g(approx.)
Package Includes:
1 x Controller

Create luxuriously infused toppings for your baked goods, meals, and beverages to produce unique culinary treats and custom-made coffee drinks. Save money on your favorite store-bought whipped cream latte by replicating the recipe at home with , preservative-free ingredients.
Features:
Safe and non-toxic material: Made of aluminum material, safe, non-toxic and durable.
Create luxuriously infused toppings for your baked goods, meals, and beverages to produce unique culinary treats and custom-made coffee drinks.
Versatile and user friendly: Create regular and alcoholic whipped cream toppings for coffee, lattes, ice cream and pastries.
Start using our whipping siphon to make wholesome whipped cream without the preservatives, chemicals, or additives of store-bought aerosol-canned creams.
Suitable for you using in the kitchen, home, cafe and etc.
Specification:
Material: Aluminum
Color: Silver
Process: drawing process
Capacity: 500ml/1000ml (Optional)
Package List:
1 x Whipped Cream Dispenser
3 x Nozzles
1 x Brush
2 x Cover tube
1 x English Manual

Feature:1. 1L large capacity, can make 7-8 ice-cream cones at one time, to meet the daily use needs.
2. Exquisite workmanship, , corrosion resistance, low temperature resistance, long service life.
3. Put the liner into the freezer and freeze it at -18 ℃ for 20 hours, then take it out and assemble it to make ice cream.
4. Easy to install and operate, it is perfectly fit for Bunny ice cream machine.
5. This ice cream liner is made of high quality 304 stainless steel. It is rust free, durable and wear-resistant.
Specification:
Condition: 100% Brand New
Item Type: Ice Cream Maker Accessory
Material: 304 Stainless Steel
Capacity: 1L
Weight: Approx. 1406g / 49.6oz
Product Size: Approx. 16.5x14cm / 6.5x5.5in
Usage: Put the liner into the freezer and freeze it at -18 ℃ for 20 hours, then take it out and assemble it to make ice cream.
Application: Fit for Bunny ice cream machine
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Ice Cream Maker Accessory
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Shaft Coupling Oupler Shaft Sleeve Durable Double Diaphragm Torsion GL‑82 X
Feature:1. The whole body is made of premium aluminum alloy material, light and strong, durable and sturdy, not easy to wear.
2. Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery.
3. Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system.
4. Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common.
5. Quality assurance, easy and convenient to use, having long service life.
Specification:
Condition: 100% Brand New
Item Type: Coupling
Material: Aluminum Alloy
Model: GL‑82 x 98‑20 x 20
Outer Diameter: Approx. 82mm / 3.2in
Length: Approx. 98mm / 3.9in
Inner Diameter: Approx. 20mm / 0.8in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Coupling

Features:
This 9999 counts multimeter can accurately measure AC and DC voltage, AC and DC current.
Displays values on a digital screen to help you control real-time condition of testing object.
Auto ranging helps correct error to ensures the validity of data.
It can also be used for resistance and temperature measurement, continuity test and diode test.
Supports data hold, maximum hold and backlight.
Indispensable tool meter for electrician measurement.
Specifications:Brand: ANENG
Model: Q1
Operating Temperature: 0 - 40 ℃
Operating Humidity: ≤75% RH
Storage Condition: -20~60℃
Storage Humidity: ≤80% RH
DIY Supplies: Electrical
Operating Mode: Auto/Manual Ranging
Measuring Inductance Range: No
Measuring Temperature Range: -20~1000℃ / -4~1832℉
Measuring Capacitance Range: 9.99nF/99.99nF/999.9nF/9.99uF/99.99uF/999.9uF/9.999MF
Measuring Voltage Range: 999.9mV/9.999V/99.99V/999.9V
Measuring Current Range: 999.9uA/99.99uA/999.9mA/10A
Measuring Resistance Range: 99.99Ω/999.9Ω/9.999kΩ/99.99kΩ/999.9KΩ/9.999MΩ/99.99M Ω
Frequency: 99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/5MHz
Display Type: Digital Display
Diode Test: Yes
Continuity: Yes
Duty Cycle: 1% -99%
Sample Rate: 3 times per second
Power: 2 x 1.5V AA batteries (Not Included)
Weight: Approx. 396g
Notes:Do NOT exceed the "maximum value" indicated in the Specification.
Do NOT input voltage at the Current Mode, the Resistance Mode, the Diode Mode, the Continuity Mode, or the Temperature Mode.
Do NOT use the product when the batteries or the battery cover is not placed properly.
Turn off the product and remove the test leads from the test points before changing batteries or fuses.
Do NOT input voltage exceeds 36V DC or 25V AC when you are at the setting of measuring current.
Packaging Included:
1 x Multimeter
2 x Test Lead
1 x Temperature Sensor
16 x Test Probe
1 x User Manual
1 x Storage Bag

Feature:1. Made of high quality carbon steel material, durable and practical, reliable to use.
2. Suitable for kitchen, storage room, bedroom, wardrobe, warehouse, cloakroom, wine cellar, etc.
3. Easy to install, the pulley makes smoothly operating, low noise, which is more convenient to use.
4. Save space, this pulley makes your room look more spacious without the usual opening.
5. Long rail with sturdy construction and light weight, ensuring longer service life.
Specification:
Condition: 100% Brand New
Item Type: Door Pulley
Material: Carbon Steel
Total Length: Approx. 27.5cm / 10.8in
Guide Plate Width: Approx. 4cm / 1.6in
Pulley Diameter: Approx. 7cm / 2.8in
Weight: Approx. 1673g / 59oz
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
2 x Door Pulley
4 x Screw

M10 Tie Rod Drill Chuck Industrial Accessory 1 - 13mm Clamp Range Hardware Tool
Feature:1. Drill chuck is with high grip, impact resistance and strong, clear speed advantage, which can cut off larger margins and process.
2. This drill chuck supports good strength and long lifespan, which can reduce the user's tool cost.
3. Practicable in various processing environments, keyless drill chuck has good functions even in very dirty environments such as cast iron.
4. Supports convenient replacement method, it just needs to use a wrench to complete the replacement of blade and pad.
5. Via craft by many experts, such a hardware tool is entitled with high performance according to strict rule.
Specification:
Item Type: Drill chuck
Handle: MT 2
Tie Rod: M10
Beat: <0.06mm
Capacity: Approx. 1 ~ 13mm / 0.04 ~ 0.51in
Drill Chuck Diameter: Approx. 55mm / 2.2in
Drill Chuck Length: Approx. 85mm / 3.3in
Clamping Range: Approx. 1 ~ 13mm / 0.04 ~ 0.51in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Drill Chuck

Features:
This fiberglass fish tape is non-conductive, the cable diameter is 4mm, and 30 meters long
High strength fish tapes are perfect for long runs and are great for heavy duty wire pulls
Ergonomic handle secures your grip at the strongest point, reduce strain and enhance productivity on the .
With shell case , the shell is made of high quality ABS material, durable and easy to store, convenient and comfortable.
Good tensile and shock resistance makes it have a long life.
Specifications:
Housing Material: ABS Plastic
Tape Material: Fiberglass
Length: 30m / 98.4FT
Diameter: 4.0mm / 0.16inch
Application: For pulling wire and cable
Weight: 1495g
Package included:
1 x Fiberglass Fish Tape

Features:This display adopts good quality materials, lightweight, rainproof, sturdy and durable.
LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.
The controller is brushless type, working silently and sensitive to the state of electric bike.
Easy to install and use, comes with mount for LCD display and suitable for 22.5mm handlebar.
Suitable for electric bicycles, cars, scooters.
Specification:
Material: Plastic LCD Metal
Color: Shown as picture
Options: 1#24V-36V; 2#36V-48V
Power: 250W/350W
Low-voltage Protection: 1#24V-36V: 19V/30V; 2#36V-48V: 30V-41V
Waterproof: Rainproof
Controller Size: Approx. 8.8 x 5.2 x 3cm / 3.46 x 2.04 x 1.18inch
Display Size: Approx. 8 x 5cm / 3.15 x 1.97inch
Weight: Approx. 332g
Package List:
1 x LCD Display
1 x Controller
1 x Mount
Note:
Each cable is labeled with color for different uses.
Red: power positive electrode
Black: power negative electrode
Yellow: power output
Brown: lamp positive electrode
White: lamp negative electrode
Blue: indicator signal
Green: signal receive

Protective Safety Helmet Fireproof Fireman Helmet Heat Resisting Hat Cap
Features:1. Full helmet design, which is anti-corrosion, radiation protection, reflective and has great insulation performance.
2. Helmet has a strong performance of high temperature resistance, resistant to 260℃. It has high strength, high penetration resistance, electric shock resistance and flame retardant.
3. lens with good transmittance, it has high definition, anti-fog and scratch-resistant.
4. Knob design, easy to adjust helmet size, suitable for different head shape.
5. High quality buffer belt, cushion pad and buffer net, give you comfortable wearing experience, and it can greatly reduce external impact on the head in all directions.
6. Anti-cutting brim design, more durable and nice-looking.
7.The shell is made of reinforced plastic, which is more resistant to aging, higher strength and great impact resistance.
Specification:Condition: 100% Brand New
Shell Material: High Temperature Resistant ABS Plastic
Material: Polycarbonate
Maximum Impact: 3525N
Heat Resistance: Resistant to 260° Without Obvious Deformation and Damage
Flame Resistance: the flame in the cap will spontaneously ignite within 5 seconds after the flame source leaves the cap.
Electrical Insulation Performance: Leakage current is less than 3mA
Package List:
1 x Fireman Helmet

Features:
1. Copper and aluminum terminal crimping pliers for copper and aluminum terminal cable crimping.
2. Hexagonal mold, crimp close.
3. Sec high , low pressure, quickly into the oil, the operation easy to return oil, the use of compression quick return oil.
4. Crimp head can make a 180 degree rotation.
5. Multifunction, made of steel by special hardened, and durable.
Specification:
Name: HX-50B terminal crimping tool
Model: HX-50B
Handle Material: Steel core rubber sleeve
Material: High carbon steel
Crimping capacity: 6-50mm²
Length: Approx.385mm/15.16 in
Weight: Approx.1520g
Color: Blue
Package includes:
1 x Crimper
Note:Please allow 1-3cm error due to manual measurement. Thanks for your understanding.