Kategóriák

Engraving Machine Spindle 42mm Engraving Machine Spindle High Accuracy CNC
Feature:1. The spindle has high accuracy ground tapered holes for easy operation.
2. With ER11 fixture, stable and not easy to loose
3. The front end of the spindle can be shaken slightly, which makes it easy to retract the tool when drilling
4. High quality material can make sure the durability and stability of the product
5. Widely used in engraving machine drilling
Specification:
Item Type: Engraving Machine Spindle
Diameter: Approx. 42mm / 1.7in
Fixture: ER11-3.175
Number and Model of Bearings: 2pcs 7002, angular contact bearings
Uses: Widely used in engraving machine drilling
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Engraving Machine Spindle
1 x Fixed Base

Features:Long service life time due to low friction, low operation noise.
No stick-slip effect, heats up less, reduced drive power required.
Low frictional loss, high transmission efficiency.
There are a lot of balls rolling movement between the screw shaft and ballscrew nut, they are able to get a higher efficiency of movement. Helpful in saving.
Ballscrew used the ball movement, so the starting torsion is very small, doesn't appear a sliding motion creeping phenomenon, can ensure accurate positioning.
Specifications:Total Length: 600mm / 23.62inch ; 750mm / 29.53inch ; 1000mm / 39.374inch
Screw diameter: 16mm / 0.63inch
Screw pitch: 5mm / 0.2inch
Max Speed : 16000RPM
Weight: Approx. 966g(600mm) ; Approx. 1177g(750mm) ; Approx. 1504g(1000mm)
Package Included:1 x Rolled Ballscrew
Note:Please allow 0-1cm error due to manual measurement. Thanks for your understanding.

Features:
32V 6A voltage and current output, single output
4 Digit LED Displays, display voltage and current, clear and easy to understand, easy to operate
Features over-voltage, over current, over temperature protection
Independent output switch, and operation buttons can be locked
Constant voltage, constant current, low ripple noise, low drift.
The over- voltage and over-current protection value can be set
Specification:
Brand: UNI-T
Model: UTP1306S
Input voltage: AC220V
Plug type: EU plug
Output voltage: 32v
Output current: 6A
Output power:192W
Load regulation voltage: <0.3% 5mV
Current: < 0.2% 3 mA
Power regulation voltage: <0.3% 5mV
Current: < 0.2% 3 mA
Set resolution voltage: 10mV
Current resolution: 1 mA
Voltage resolution: 10mV
Setting accuracy
Voltage (25 ℃± 5 ℃) : < 0.5% 5 mv
Current: < 0.2% 3 mA
Ripple noise
(20Hz~20MHz) voltage: no more than 10mVrms
Current: 2 or less
Temperature coefficient of the voltage: 300 PPM or less / ℃
Current: 300 PPM or less / ℃
Power supply voltage AC 110V/220V(switchable)±10%
Frequency: 50 hz / 60 hz
Size:15*23*8cm/5.9*9.1*3.1in
Weight: Approx.1901g/67.1oz
Package list:
1 x DC Stabilized Power Supply
1 x Power cable
Note: Please kindly make a note if you need any plug adapter.

Features:
This 7.5inch E-Ink Display HAT (B) is specially designed for . Suitable for 2B/3B/Zero/Zero W.
Features the resolution of 640 * 384 and its embedded controller, easy to use via SPI interface.
SPI interface for connecting with other controller boards, for Raspberry/Arduino/Nucleo, etc.
With its wide viewing angle(>170°) and clear display even under direct sunlight.
Ultra-low power consumption (standby power: <0.017mW) - Almost only need to consume power when refreshing.( power: 38mV(typ.)
E-Ink screen module is widely used for shelf labels, industrial meters and other display applications.
Comes with development resources(Wiki : www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B)) and manuals(examples for Raspberry/Arduino/STM32).
Specification:Type: 7.5inch E-Ink Display HAT (B)
Suitable brand: For
Interface: SPI
Working voltage: 3.3V
Dot Pitch: 0.255 * 0.255
Resolution: 640 * 384
level: 2
power: 38mV(typ.)
Standby power: <0.017mW
Viewing angle: >170°
Full time: 6s
Interface:VCC: 3.3V
GND: GND
DIN: SPI MOSI pin
CLK: SPI SCK pin
CS: SPI chip selection, low active
DC: Data/ selection (high for data, low for ): External reset, low active
BUSY: Busy status output, low active
Material: Tempered Glass
Display color: , White and Red
Weight: Approx. 181g
Display size: Approx. 163.2 * 97.92mm / 6.4 * 3.9in
Outline size: Approx. 170.2 * 111.2mm / 6.7 * 4.4in
Package list:1 * 7.5inch E-Paper Hat (B)
1 * E-Paper Driver Board
1 * PH2.0 20cm 8Pin Cable
1 * RPi Screws Kit(2Pcs)
Note:Please allow slight error due to manual measurement. Thanks for your kind understanding.

SANOU K11-100 MANDRINO AUTOCENTRANTE KIT PER TORNIO 3 3 GRIFFE Ø 100MM
Features:
100% brand new and high quality.
The 3-Jaw self-centering chuck features short cylindrical center mounting.
Semi-steel chuck body is made from high quality cast iron,durable in use.
This is a chuck that can be used to extend the machine functions.
Both side of jaw teeth and guides are ground and hardened to HRC58-62.
Specifications:
Model: k11 100
Chuck type: three jaw chuck
Power type: manual
Chuck diameter: 100mm / 3.94in
Weight: 3181g
Package included:1 x Lathe Chuck
3 x jaws
1 x wrench
3 x screw

Features:An all-metal housing and is water-resistant and sealed against dust for rugged durability.
Quiet and energy efficient operation. Accurately positions the load at variable and repeatable locations within the full stroke.
Reliable performance, sensitive action stable running.
The same characteristics of push and pull and good environment adapt ability etc.
Commonly used in automotive, devices and engineering industry.
Specifications:Material: Metal
Rated Voltage:DC 12V
Optional Stroke Length: 200mm, 350mm, 400mm, 450mm, 700mm, 750mm: 6mm/s
Max Push Load: 1500N
Connection mode: Elongation: Positive pole to black line, negative pole to red line.
Shorten: Positive pole to red line, negative pole to black line.
Weight: Approx. 1020-1983g
Size (Approx.)
Stroke Length 200mm 350mm 400mm 450mm 700mm 750mm
Total Length 325mm 475mm 525mm 575mm 825mm 875mm
Width 75mm 75mm 75mm 75mm 75mm 75mm
Package Included:1 x Linear Actuator
Note:
Only linear actuator, no other stuff included.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Vacuum pump specially designed for the milking machine, stable performance and long service life.
2. Milking with high suction pulsation, high efficiency and labor saving, strong practicability.
3. Uses high‑quality aluminum alloy shell, copper core and ABS material, corrosion resistance and high strength.
4. Perfect milking machine accessories, suitable for donkeys, sheep, cows, horses, etc.
5. Exquisite workmanship, safe and reliable, easy to install and use, suitable for farms and pastures.
Specification:
Condition: 100% Brand New
Item Type: Milking Machine Accessories
Material: Aluminum Alloy Shell, Copper Core, ABS
Weight: Approx. 1200g / 42.3oz
Product Size: Approx. 16x12x7cm / 6.3x4.7x2.8in
Battery Type: Lithium Battery (Built-In)
Battery Model: 18650
Battery Capacity: 5200MAh
Maximum Suction: 80kPa
Input Voltage: 12.6V, 48W
Wide Voltage: 100-240V
Applicable Objects: Donkey, sheep, cow, horse
Uses: Livestock products processing machinery
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Milking Machine Vacuum Pump
1 x Adapter Plug
Note:
1. Please allow 0-2 cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. With 1024 X 600 ultra‑clear resolution, giving you a perfect visual experience.
2. IPS178° full viewing angle, clear picture and 2 Micro USB and 1 HDMI interface.
3. Support HDMI input, HDMI display, can be used as a computer monitor.
4. This product has a backlight switch, Usb power supply and touching function.
5. This product is driver‑free for Raspberry Pi/windows/Ubuntu/Raspbain/Ulinx/linx.
Specification:
Item Type: Display Screen for Raspberry Pi
Size: Approx. 25.4cm / 10in
Interface: 2 x Micro USB 1 x HDMI
Resolution: 1024 x 600
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x for Raspberry Pi Screen
2 x Charging Cable
1 x HDMI Cable
1 x Screw Package

Feature:1. Small and portable, can be grasped by one hand, easy to carry, save more space for the workbench.
2. With current limit protection, short circuit alarm and self-recovery function
3. Creating a quiet working environment, when the internal temperature of the power supply reaches a certain temperature, the fan will automatically turn on
4. Using high-quality materials, strong and durable, has a long service life
5. With strict quality control and quality assurance, high safety factor, can be used with peace of mind
Specification:
Item Type: Adjustable DC Power Supply
Model: NPS3010W 3-digits
Input Voltage: AC 230V/115V±10% : 50Hz/60Hz
Working Temperature: 0℃~40℃
Relative Humidity: <80% RH
Storage Temperature: -10℃~70℃
Relative Humidity: <70% RH
Output: 0-30v / 0-10A
The Header Shows:
0.4 inch red 3 digital display
Display Resolution: 0.1V/0.01A.
Display Accuracy: 0.5% ± 3-digits
Larger input voltage range in 230V±10% 50Hz range
(Can be customized to 115V ± 10% 60Hz)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Adjustable DC Power Supply
1 x Clip Test Line
1 x Power Cord
1 x User Manual

Features:1. Automatic induction: When the scanning box is not working, the scanning is in standby state, which can extend the service life. When scanning, just put the bar close to the scanning window, it can automatically scan the .
2. The scanner can easily scan multi type codes such as payment barcode, bar for computer screen, paper bar , bar for commodity an so on.
3. The scanner body is made of ABS material which is broken-resistant, and the cable is flexible to be folded 6000 times.
4. Connect via USB port and no driver needed, plug and play.
5. Fast reading speed and high safety factor, suitable for supermarket, catering clothing, pharmacy and other store cash register.
Specification:Condition: 100% Brand New
Material: ABS
Color: Black
Image sensor: CMOS: 752 * 480
Light: White LED
Scanning distance: 0-200mm UPC/EAM 13mil PCS=90% ; 0-150mm QR 20 mil PCS = 100%
Scanning angle: 60 degrees left and right, 60 degrees back and forth, 360 degrees rotation
Viewing angle: 48 degrees horizontal and 30 degrees vertical
Identification accuracy: ≥ 5mil
Print contrast: ≥ 25%
Indicating mode: Red and blue LED lights, double buzzer
Communication interface: USB (for -KBW, virtual serial port)
Input voltage: 5 VDC
Operating current: 400MA
Working temperature: - 20℃ - 50℃ (- 4℉-122℉)
Storage temperature: - 40℃- 80℃ (40℉-176℉)
Relative humidity: 5% 95S (no condensation)
Electrostatic protection: ±14 kV (air discharge), ±8 kV (direct discharge)
Grade of protection: IP52
Cable Length: 180cm/70.9in
Symbologies:
2D: PDF417. QR (0R1/2. Micro). Data for etc.
ID: Code128. /EAN-128. AIH-128. EAN-8. EAN-13. ISBN/ISSN.
UPC-E. UPC-A. Interleaved 2 of 5. ITF-6. ITF-14. 2
of 5,Industrial 25. Standard 25, 39. Codabar.
93. H.PIessey. for -Plessey. GSI DataBar (RSS).
(RSS-14. for RSS- Limited. RSS-Expand)
Package List:1 x Scanner
1 x 180cm Cable

Integrated Servo Motor IHSS42-24-07 Integrated Servo Motor 24V 0.7Nm
Features:
2 in 1 motor and driver, saving space.
Full loop, precise position and speed control for demanding application requirements.
High resolution encoder provides precise positional accuracy.
Double pulse control, and precise.
Stable performance, low heat, high efficiency.
Specification:
Model: iHSS42-24-07
Rated voltage: 24V
Current: 1.2A
Number of Phase: 2 phase
: 0.7NM
Encoder line: 1000 lines
Package list:
1 * Integrated Servo Motor

Feature:1. Ball guide X axle and Y axle can move continuously, convenient to use.
2. Adopting excellent plastic and material, it is strong and durable.
3. Support for stereo microscope or photoelectric microscope, easy to move.
4. The reading accuracy is 0.1mm, which is stable, reliable and practical.
5. Fine adjustment microscope moving platform, suitable for laboratory use.
Specification:
Condition: 100% Brand New
Item Type: Fine Adjustment Platform
Material: Plastic,
Stroke:Horizontal: 75mm / 3.0in
Vertical: 55mm / 2.2in
Reading Accuracy: 0.1mm
Connection Size: Φ 95mm / 3.7in
Product Size: Approx. 180 x 155 x 26 mm / 7.1 x 6.1 x 1 in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Fine Adjustment Platform

Feature:
1. High power adjustable vacuum pump, has adjustable power switch. The power can be adjusted according to different thickness of cow's milk eye, protect the breast, the milker will automatically stop when milker is full. With vent hole, convenient to host heat dissipation.
2. Suitable for household use, easy to operate. With handle, convenient to carry.
3. Plastic milking bucket, easy to .
4. Silicone lining, eco-friendly, safe, non-toxic, odorless, soft, has massage effect on cow, the cow is squeezed out milk under comfortable conditions.
5. Equipped with milk tube cleaning brush, easy to milk tube.
6. The milk tube is affixed with a digital sign, easy to install. No. 1 is the pulsation port and No. 2 is the suction port.
Specification:
Item type: Electric Milking Machine
Material: plastic
Color: As picture shown
Application: animal husbandry, breeding industry
Plastic milk bucket length: Approx. 30cm/11.8in
Plastic milk bucket bottom width: Approx. 16cm/6.3in
Plastic milk bucket width: Approx. 7.5cm/3in
Vacuum pump size: Approx. 21.7x12x7.5cm/8.5x4.7x3in
Voltage: 100-240V
Options: US, EU
Package List:
1 x plastic milk bucket
2 x milk liner cup (connected with milk tube)
1 x adjustable vacuum pump
1 x milk tube brush
1 x instruction
1 x plug

Description:Save precious time and money on every construction job and get flawless, highly accurate levelling for all your projects. Whether for roadwork, home, deck or fence building, foundation installation, landscaping or excavations, this auto level offers fast, convenient and precise self-levelling, saving you from unnecessary hassle.
Features:
High definition lens that can magnify the image up to 32x, allows you to work without issues, even in low light conditions.
360 degree rotary clear dials, provides more accurate location.
The horizontal knobs offer unlimited range, while the circular level enables angular measurements.
Comes with a plastic case, which makes it easy to be taken anywhere or to be stored for next time use.
Application: construction engineering survey, deformation and subsidence monitoring, mining survey, etc.
Specification:
Model
SW-C32
Standard Deviation per Km
1.5mm
Telescope Imaging
Erect image
Magnification
32x
Lens Diameter
36mm
Field Angle
1°20'
Shortest Sighting Distance
0.4m
Stadia Multiplication Constant
100
Stadia Addition Constant
0
Circular Level Accuracy
8'/2mm
Dial Scale Graduation
1°/1gon
Compensator
V Hanging wire/magnetic damping
Working Range
±15'
Setting Accuracy
±0.3"
Thread
M16 or 5/8"
Characteristics
Material
Plastic, Metal
Product Size(appr.)
194 * 140 * 105mm / 7.6 * 5.5 * 4.1inch
Package Weight(appr.)
2.1kg
Accessories
Case, User Manual
Package Included:1 * Optical Level
1 * Case
1 * User Manual

Features:
It is made of high quality 304 stainless steel, fluororubber and corrugated tube shaft , reliable and durable
general-purpose components for vacuum applications requiring cleanliness and corrosion resistance.
Edge-welded bellows and valve move out of the gas thereby achieving high conductance features
Easy to maintenance, normal repairs can be made without removing the valve body from the system
Good sealing performance, stable and no leakage
Application: semiconductor, solar energy, metallurgy, aviation, light industry, etc
Specifications:
Model: KF25
Material: 304 stainless steel fluororubber corrugated tube shaft
Leakage rate: - 10%
Working temperature: -30~150 ℃(fluororubber)
Size:13.97 x 6.86cm/5.5 x 2.7in
Weight: 678g
Package includes:
1 x Vacuum Isolation Valve

Feature:1. The power supply is small and portable, easy to carry, and saves more space for the workbench.
2. Current limit protection/short circuit alarm can stop output for self-recovery.
3. The product can create a quiet working environment, when the internal temperature of the power supply reaches a certain temperature, the fan automatically turns on.
4. The power supply provides protection for the circuit and is safe for use.
5. The product is featured with high quality material, good performance and sturdy appearance.
Specification:
Item Type: DC stabilized power supply
Model: NPS3010W 4digits
Input Voltage: AC 230V/115V±10% : 50Hz/60Hz
Working Temperature: 0℃~40℃
Relative Humidity: <80% RH
Storage Temperature: -10℃~70℃
Relative Humidity: <70% RH
Output: 0-30v / 0-10A
The Header Shows: 0.4 inch red four digits display
Display Resolution: 00.01V/0.001A.
Display Accuracy: 0.5% ±3 digit
Larger input voltage range in 230V±10% 50Hz
(Can be customized to 115V ± 10% 60Hz)
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x DC Stabilized Power Supply
1 x Crocodile Clip Test Line
1 Line
1 x User Manual

2000mW NEJE DK-8-KZ DIY Laser Engraver Cutter Engraving Carving Machine Printer
Features:With high speed, high and high stability.
Support USB connection to PC, professional software helps to edit images and monitor the engraving process. The software is available in 6 languages.
The laser head can be easily adjusted, ensuring good engraving quality and high efficiency.
Wide range of applications, good at image engraving and deep engraving, you only need to adjust the laser head. Soft materials can even print 3D and gradient effects.
It is for batch operations of logo engraving, making the engraving machine more practical. You only need to store the image in and send the image to the engraver.
Wear protective glasses to protect your eyes from laser damage.
Acrylic body and fine workmanship show excellent quality.
Easy to use and install, it is a good gift for DIY lovers.
Support operating system: For xp/win7/win8/win10.
Engraving materials include: hardwood, plastic, bamboo, rubber, leather, cut paper or other flammable materials (such as mobile phone cases, mice, pencils, business cards, wallets, plastic combs, etc.).
The laser engraving area is about 38mm*38mm, the is very high, and the effect is very good!
Engraving materials: the width should not exceed 11.5CM, the height should not exceed 5.5CM, and the length should not exceed 25CM.
Specification:Material: Acrylic Aluminum Stainless Steel
Power: 2000mW
Support system: for XP / Win 7 / Win 8 / Win 10
DPI: 350dpi
Laser wavelength: 405nm
Engraving area: approx. 38 * 38 * 70mm / 1.5 * 1.5 * 2.8in
Temperature: 500 °C
Supported image formats: JPEG / BMP (24-bit only) / TIFF / PNG (32-bit or less) / PCX (8-bit and 24-bit RLE) / PCD
Image size: 490x490 pixels
Engraving mode: bitmap engraving
Power mode: USB powered
Supply voltage: 4.2V-5.5V
Package list:1 * Laser Engraving Machine
1 * Protective Filter
1 * Micro USB Cable
1 * Attachment Bag
1 * User Manual

Feature:1. The display screen of this product has a resolution of 1024 X 600 ultra‑clear.
2. The HDMI interface of this display is used for display and the USB interface is used for touch.
3. This display has a backlight switch, usb power supply, with a high resolution.
4. This display is driver‑free for Raspberry Pi/Windows/Ubuntu/ Raspbain/ Ulinx / Linx
5. This product is suitable for a wide range of applications, such as office, online teaching, watching videos and so on.
Specification:
Item Type: for Raspberry Pi Display
Size: 10 in
Interface: Micro USBX2 HDMIX1
Resolution: 1024X600
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x For Raspberry Pi Display
2 x Charging Cable
1 x HDMI Cable
1 x Screw Pack

Features:
Carbon steel material has strong stability, is not easy to rust, and has a long service life.
High accuracy makes the boring head compatible with high accurate works.
The model is universal suitable for nearly all kinds of lathe.
Complete set with auxiliary installation tools to help you with installation.
Delicate and practical, high hardness, firm and strong.
Specification:Material:Carbon Steel
System:English
Boring Bar:R8
Boring Bar:7/16"
Boring Head:1/2''
Scale:0.001''
Package List:1*R8 Boring Head
9*Boring Cutter
3*Hex Wrench

Feature:
The whole body of regulator is insulated and is safer to use in harsh environments.
The product uses high-quality electronic components to maintain high reliability under harsh environmental conditions (high humidity, dust, salt environment).
This regulator is suitable for single and three phase generators.
The adjustment accuracy of the regulator is high, and the theoretical fluctuation is only 0.5% .
The board of the regulator is made of flame retardant and high temperature resistant material, which is safe and durable.
Specification:Power supply voltage:50/60Hz 170-277 V(±10% of range tolerance)
Voltage sensing(single-phase): 50/60Hz 170-277 V(±10% of range tolerance)
Maximum continuative field current: 5 A
Maximum forcing field current (1 minute): 8A
Maximum field voltage: 100 V
Field resistance: 8 Ω-20 Ω
Regulation accuracy: ±0.5 % (steady state conditions, rated, balanced and non deforming load, constant frequency)
Thermal Drift: ±0.5 % ( voltage change for 50°C change from TAMB, after 10 minutes)
Response time: 1 Cycle
Operating temperature: -30°C / 70°C
Weight: 687g / 24.2oz
Package list:1 * Voltage Regulator Board
Note:The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Features:
1. Made of stainless steel and copper, not easy to rust.
2. Easy and convenient to operate, save material and water.
3. The valve contains a1/2'' female rotor, a 1/4'' air plug and 3/8'' NPT male.
4. Widely used for home decoration and large construction site painting.
5. Specializing in spraying cement, calcium hydroxide, waterproof mortar and other thin materials spraying construction.
6. Valve will work with 120 PSI and can deliver up to 100CFM.
Specification:
Condition: 100% Brand New
Material: Stainless Steel Copper
Valve: 1/2'' female rotor, a 1/4'' air plug and 3/8'' NPT male
Valve Pressure: 120 PSI, deliver up to 100CFM
Spraying Hole Quantity: 4pcs
Spraying Hole Size: 18mm / 0.7in
Working Air Pressure: From 4 to 6 ATM
Weight: Approx. 2834g / 100.0oz
Handle Length: Approx. 73cm / 28.7in
Package List:
1 * Spray
Note: Need to configure a 0.6 cubic meter, 8kg exhaust pressure or larger air supporting use.(the air is not included)

Features:
High precision short cylindrical center mounting.
The chuck base is made of high quality material, hardened and durable in use
Flimsy parts are specifically engineered by quenching, for greater durability and extended life.
Adjusted independently to center, suitable for processing special with superior gripping force.
4-jaw design, independent and reversible, widely used for woodworking lathe.
Specifications:Brand: SANOU
Model: k72-100
Chuck Type: 4-jaw chuck
Power Type: Manual
Chuck Diameter: Approx. 100mm/3.9in
Bore Diameter: Approx. 25mm/1in
Clamping Range:
Internal Jaw: 6-45mm
External Jaw: 40-100mm
Weight: Approx. 3258g / 114.9oz
Package List:1 x 4-jaw chuck
1 x Wrench
4 x Screws

Features:1.With high power adjustable vacuum pump, with power switch, power can be adjusted according different thickness of cow's and sheep's milk eye, protect the breast, automatically stop milking when milk is full, save time, with vent hole, convenient for host to heat dissipation.
2.Small milker, suitable for household using, with handle, easy to carry and operate.
3.Stainless steel milk suction tank, easy to .
4.Equipped with milk tube cleaning brush, easy to milk tube.
5.Suitable for cow, goat and sheep to milking.
Specifications:Material: stainless steel
Color: silver
Voltage: 100-240V
Capacity: 5L
Options: cow US plug, cow EU plug, sheep US plug, sheep EU plug,
Packing List:1*Stainless steel milk
1*Double head milk lining
1*Adjustable vacuum pump
1*Power adapter
1*Milk tube brush
1*Instruction

Feature:1. Compressed air as power, energy saving and environmental protection.
2. Light weight, fast speed, low noise, suitable for electronics, light industry.
3. Ergonomically designed handle, comfortable to hold, not easy to fatigue for long-term use.
4. With energy-saving switch, the air source can be turned on and off by sliding the air connector up and down.
5. Strong environmental adaptability, reliable operation in a wide temperature range, wet and dusty environment.
Specification:
Condition: 100% Brand New
Item Type: Pneumatic Riveting Gun
Riveting Specifications: Φ2.4, Φ3.4, Φ4.0mm
Riveting Material: Aluminum, Iron, Stainless Steel
Nail Specifications: Blind Rivets
Working Pressure: 5.0-7bar
Tensile Force: 4850N
Air Consumption: 60L/Min
Stroke: Approx. 18mm / 0.7in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x Pneumatic Riveting Gun
1 x Intake Connector
2 x Wrench
1 x Nozzle Head
1 x Oiler
1 x Instruction Manual
1 x Nail Can

Feature:1. Optimized design provides high sensitivity, low distortion and wide, smooth frequency response. Intelligent and ergonomic design, easy to use.
2. Suitable for all imported audiometers, providing high sensitivity.
3. Hands-off screening gives the operator complete control over the test program.
4. Through microprocessor control, accurate and consistent hearing test can be achieved.
5. Unique instrument improves pure tone air conduction threshold and hearing screening test.
Specification:
Item Type: audiometer earphone
Material: plastic compound cloth alloy
Plug Type: AIPUTE
DC: 10 ohms ±1.0 ohms
Power: 100-8000 hz
Input/output: 1000 mW
Plug Diameter: Approx. 6.5mm /0.25 in
Sensitivity: 3dB
Distortion Rate: 3%
Frequency: 125-8000 hz
Line Length: Approx. 180cm / 70.9in
Function: used for air conduction test and screening of audiometer
Package List:1 x Headphone

Features:An all-metal housing and is water-resistant and sealed against dust for rugged durability.
Quiet and energy efficient operation. Accurately positions the load at variable and repeatable locations within the full stroke.
Reliable performance, sensitive action stable running.
The same characteristics of push and pull and good environment adapt ability etc.
Commonly used in automotive, devices and engineering industry.
Specifications:Material: Metal
Rated Voltage:DC 12V
Optional Stroke Length: 200mm, 350mm, 400mm, 450mm, 700mm, 750mm: 6mm/s
Max Push Load: 1500N
Connection mode: Elongation: Positive pole to black line, negative pole to red line.
Shorten: Positive pole to red line, negative pole to black line.
Weight: Approx. 1020-1983g
Size (Approx.)
Stroke Length 200mm 350mm 400mm 450mm 700mm 750mm
Total Length 325mm 475mm 525mm 575mm 825mm 875mm
Width 75mm 75mm 75mm 75mm 75mm 75mm
Package Included:1 x Linear Actuator
Note:
Only linear actuator, no other stuff included.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Condition: 100% Brand New
Item Type: Dissolved Oxygen Meter
Material: Plastic
Measuring Range:Dissolved Oxygen: 0.0- 20.0mg/L
Temperature: 0～40°C
Basic Error:Dissolved Oxygen: ±0.3mg/L
Temperature: ±1°C
Residual Current: ≤ 0.15mg/L
Response Time: ≤30s (90% response at 20°C)
Automatic Temperature Compensation Range: 0～40°C
Power: 4 x AAA Battery (not included)

4.3" LCD NanoVNA-F Vector Network Antenna Analyzer 50KHz-
1000MHz VNA UHF VHF HF
Feature:1. Using4.3‑inch IPS TFT LCD resistive touch screen, it has a large viewing angle and can be seen clearly even in strong outdoor light.
2. Change the Lipo charging IC to IP5306 (with 2A high charging current), thereby shortening the charging time.
3. Use larger and better operating levels, larger and better power switch, more dependable.
4. Support Chinese and English menu switching, bring much convenience for you.
5. Upgrade the user program through a virtual U disk (internal 16MB for SPI flash memory).
6. Standard aluminum casing protects the SMA head and reduces the interference of external electromagnetic waves on the instrument.
7. The measurement range of NanoVNA‑F is 50k‑1GHz. Use the harmonics of the clock chip SI5351 to measure frequencies up to 1000MHz. At 600M‑1GHz, the dynamic range of S11 is 40dB (VSWR is less than 1.02).
8. The RF front end is designed with metal shielding, so that the dynamic range of S21 in the entire frequency range is better than 60dB.
Specification:
Condition: 100% Brand New
Item Type: Networks Analyzer
Material: PCB
Color: Black
Measuring Frequency: 50KHz-1000MHz
RF Output: -13dBm (maximum -9dBm)
Frequency Accuracy: <0.5PPM
Port Swr: <1.1
Display: 4.3 Inches IPS TFT (800 x 480)
USB Interface: USB Type-C
Communication Method: CDC (serial)
Power Consumption: USB 5V 200mA,can be powered by battery, maximum charging current 2A
Output Capacity: 5V / 1A
Number of Calibration Points: 101
Scanning Points: 101
Display Tracking: 4, Mark: 4, Setting Save: 5
Scan Time: About 1.9s/time (50khz-1000mhz Full Frequency Band)
Application: Measure S parameters, voltage standing waves ratio SWR, phase map, group delay, Smith chart, etc.

Package List:
1 x Analyzer
2 x 200mm/7.9in SMA-JJ RG316 Cable
6 x Screw
1 x Data Cable
1 x Instruction

Features:
1. 100% brand new and high quality
2. Made of high quality material, durable to use.
3. With LED Stroboscope, when adjusting positive and negative, the LED light will change color accordingly.
4. There are various kinds of accessories for your choice
5. Suitable for automotive testing and it is easy to operate
Specification:
Condition: 100% Brand New
Model: P1970
Package List:
2 * 5Kohm Potentiometer (Variable Resistor)
2 * LED Stroboscope
2 * SRS Linker
2 * Crocodile Clip
2 * Probe
2 * Needle Probe
2 * Male to Female Linker
4 * Banana Plug Test Line
40 * Flat Terminals
12 * Round Terminals

Feature:
1. Aluminum alloy cutter plate, lightweight designed, hard treatment, good rigidity.
2. Imported alloy material blade, overall coating, sharper, durable and won't break easily.
3. Prevent damage to livestocks when trimming hoof.
4. Specially designed for trimming the hoof of cattle/goat.
5. Suitable for sheep, cattle, horse and other livestock.
Specification:
Condition: 100% Brand New
Item Type: Cattle Hoof Trimming Cutter
Material: Metal
Color: As Pictures Shown
Suitable for HL-Q7H-II Cattle Hoof Trimming Cutter
Weight: Approx. 276g
Size: Approx. 9.6x9.6x1.3cm/3.78x3.78x0.51inch
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Cattle Hoof Trimming Cutter
1 x Screwdriver

Description:
2 in 1 multifunctional pipe bender works well on tubes of 15mm and 22mm. It is perfect for copper tubes and aluminum tubes. By using the bender, you can get a wanted angle, as it can bend the tube in a wide range of 180 degree.
Features:
1. Designed for bending tube in a wide range of 180 degree.
2. Just one tool works on 2 sizes of tubes: 15mm, 22mm, practical and economical.
3. Made of hardened steel, it is heavy duty and durable in use.
4. The non-slip handle is comfortable to grip and operate.
5. Perfect bending tool for copper tubes and aluminum tubes with small pipe diameter.
6. Widely used in air conditioning, ventilation systems, electronic wiring, automotive heating system, etc.
Specifications:
Model: CT-5060
Material: copper
Color: red
Height: Approx. 13.6cm/5.35in
Length: Approx. 74.5cm/29.33in
Fit Tube: copper tubes, aluminum tubes with proper size
Fit Tube Diameter: 15mm/0.59in, 22mm/0.87in
Weight: Approx. 3850g
Package Included:
1 x Tube Bender
1 x 15mm Pipe
1 x 22mm Pipe
Note:
1. This bending tool can only deal with some certain small diameter tubes, so please refer to the specifications before bending.
2. This tube bender will function normally for copper tubes and aluminum tubes with proper size.
3. Due to the difference between the monitors and light effect, the picture may not reflect the actual color of the item.
4. Please allow small deviation due to manual measurement. Thanks for your understanding.

Features:
This is a 12inch high resolution TFT LCD monitor.
Featuring resolution 1024x768, Supporting VGA input, multi language menu.
Suitable for CCTV monitor, PC monitor or indoor use.
Made of premium materials for maximum durability.
Sporting contrast ratio: 700:1; Brightness: 400 /m2; Visual angle: H175 V:175.
Specification:Condition: 100% Brand new
Housing Material: ABS
Resolution: 1024x768
Contrast ratio: 700:1
Brightness: 400 /㎡
Visual angle: H175 V:175
Input signal: VGA
Package list:1* Monitor
1* VGA Cable
1* Power Cord
1* Power Plug

Feature:1. Simple, convenient and safe, wonderful accessory for dental chair.
2. Angle adjustment is easy and flexible and support brightness adjustment.
3. 5000-6300K of the color temperature and 8000-32000LX, high efficiency.
4. LED 4 chips induction shadowless lamp, designed for dental surgical.
5. There are 2 different sizes available, you can choose by your needs.
Specification:
Condition: 100% Brand New
Item Type: LED Oral Light
Material: Plastic
Optional Connector Size: 22mm / 0.9in, 26mm / 1in
Power: 15W
Color Temperature: 5000-6300K
Illumination: 8000-32000LX
Voltage: AC12V
Frequency: 50-60HZ
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Cold Light
2 x Handle
1 x Wrench
1 x Manual

Feature:1. Supports wide application, state relay can be easy and convenient to operate.
2. Professional and simple helps state relay with stable performance, which supports high durability and stability.
3. 3‑phase state relay is equipped with built‑in protection that can prevent overvoltage, overcurrent and short circuit.
4. Better maintain long‑term operation all due to SSR's large heat dissipation area.
5. And better conductivity and more resistant to corrosion terminals supports high‑quality and high practicality.
Specification:
Item Type: state relay
Brand: BERM
Model: BERM-303238 200Z-150Y-CT
Input Current: Larger than 5mA
On-off Time: ≤10mS (millisecond)
Load Voltage: 24-480VAC
Rated Maximum Current: 200A
On-State Voltage Drop: ≤1.5V
Minimum on Current: 50mA
Insulation Voltage: ≥2500V
Insulation Resistance: ≥100MΩ
Working Temperature: -35～75℃
Power Frequency: 50/60HZ
Size:Approx. 110mm / 4.3in
Approx. 125mm / 4.9in
Approx. 136mm / 5.4in
Approx. 92mm / 3.6in
Approx. 48mm / 1.9in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px #000; border-left: 1px #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px #000; border-right: 1px #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x State Relay
1 x Fastening Kit Set

NEJE DK-8-KZ 3000mW Mini USB Laser Engraver Engraving Carving Machine DIY Print
Features:With high speed, high and high stability.
Support USB connection to PC, professional software helps to edit images and monitor the engraving process. The software is available in 6 languages.
The laser head can be easily adjusted, ensuring good engraving quality and high efficiency.
Wide range of applications, good at image engraving and deep engraving, you only need to adjust the laser head. Soft materials can even print 3D and gradient effects.
It is for batch operations of logo engraving, making the engraving machine more practical. You only need to store the image in and send the image to the engraver.
Wear protective glasses to protect your eyes from laser damage.
Acrylic body and fine workmanship show excellent quality.
Easy to use and install, it is a good gift for DIY lovers.
Support operating system: For xp/win7/win8/win10.
Engraving materials include: hardwood, plastic, bamboo, rubber, leather, cut paper or other flammable materials (such as mobile phone cases, mice, pencils, business cards, wallets, plastic combs, etc.).
The laser engraving area is about 38mm*38mm, the is very high, and the effect is very good!
Engraving materials: the width should not exceed 11.5CM, the height should not exceed 5.5CM, and the length should not exceed 25CM.
Specification:Material: Acrylic Aluminum Stainless Steel
Power: 3000mW
Support system: for XP / Win 7 / Win 8 / Win 10
DPI: 350dpi
Laser wavelength: 445nm
Engraving area: approx. 38 * 38 * 70mm / 1.5 * 1.5 * 2.8in
Temperature: 500 °C
Supported image formats: JPEG / BMP (24-bit only) / TIFF / PNG (32-bit or less) / PCX (8-bit and 24-bit RLE) / PCD
Image size: 490x490 pixels
Engraving mode: bitmap engraving
Power mode: USB powered
Supply voltage: 4.2V-5.5V
Package list:1 * Laser Engraving Machine
1 * Protective Filter
1 * Micro USB Cable
1 * Attachment Bag
1 * User Manual

Feature:1. Practical electric flywheel replacement parts, can directly replace old or broken parts.
2. Using premium iron material, high hardness, corrosion resistance and long service life.
3. Easy installation, stable performance, not easy to damage, and strong practicability.
4. Good wear resistance and high reliability, suitable for gasoline generators.
5. This electric start magnetic flywheel is perfect for 188F/190F/192F/GX390.
Specification:
Condition: 100% Brand New
Item Type: Flywheel
Material: Iron
Weight: Approx. 5450g / 192.2oz
Size: Approx. 20x4.5cm / 7.9x1.8in
Applicable Model: 188F/190F/192F/GX390
Uses: Generators for farming, breeding farms, construction sites, garden sites
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Electric Start Flywheel
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

220V Swimming Pool 125Psi 516GPD C-660P Blue And White Dosing Pump Double-Ball
Features:1. Used for chemical dosage and sanitizing of swimming pool.
2. Generally used with water quality monitor. Can be fully automatic, semi-automatic control.
3. Output quantity up to 516GDP(Gallons per day). Output pressure up to 125PSI. Stroke regulation 4-100% , small doses at high operating rates are allowed.
4. A simple, high efficient standard design, moving parts are kept at a minimum level to help keep the unit nearly maintenance-free.
5. C-600P injector has an autofocus frame, front side head, easy to install and adjust.
Specification:Condition:100% Brand New
Color: As Pictures Shown
Voltage: 220V ~ 50HZ-45W
Maximum working pressure: 125 psi (8.6 bar)
Biggest fluid temperature: 130 ℉(54 ℃)
Maximum temperature: 14 °to 110 ℉ / - 10° to 43 ℃
Weight: Approx.2602g/91.8oz
Package list:
1 * Swimming Pool Dosing Pump

Feature:1. The disc cutter is made of high‑quality materials, strong and durable, and the quality is guaranteed.
2. This punch has different sizes, will meet your different needs, easy to operate, suitable for different places.
3. The disc cutter is a tool needed by jewelry manufacturers and jewelry repair workers, and can be used to repair jewelry.
4. This disc cutter can be used as a punching device and a punching film. It is an exclusive tool for jewelry processing, suitable for repairing.
5. The professional‑quality disc cutter device can cut to the perfect size every time, and is compact and easy to carry.
Specification:
Item Type: Disc Cutter
Material: Metal
Function: Punch, die, jewelry processing tools, manual tools
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Size: Approx. 100mm / 3.9in
45mm / 1.8in
30mm / 1.2in
50mm / 2in
Package List:1 x Base
11 x Punching Post
Note:Manual measurement, with errors

Features:1. Identify the specific type of metal such as gold, silver, copper, coin by means of a frequency regulator.
2. Detection system with remote search system and precise positioning.
3. Adopts microelectronic processor to control the chip unit calibration and instrument self-inspection system which is quick for scanning and testing, improves the work efficiency, and reduces the labor intensity of the test.
4. This instrument can detect at least 3.5 meters for a 5x5cm object. A 30x30cm object can be detected in 5-8 meters.
5. If the object of this size is buried for a long time, it can be detected in the range of 20 meters. If the area of the object is larger, the depth of detection will be deeper.
Specification:Condition: 100% Brand New
Item Main Color: Rose Gold
Aluminium Box Color: Silver
Search System: Microcomputer CPU Control And Reflection Conductivity
Search Area: Approx. 1400meters / 1531.1yd
Inspection Depth: Approx. 25M / 27.3yd
Energy: 12V 1000-1600mAh
Transmission Frequency: 5.6-6KHz
Signal Frequency: 360-440Hz
Detection Type: Gold; Silver; Copper; Precious Stone, etc.
Charging Method: Built-In Rechargeable Battery, Charge for 5-8 Hours
Receiver Size: Approx. 33.5 x 5cm/13.2 x 2in
Receiver Handle Length: Approx. 11cm/4.3in
Transmitter Size: Approx. 10.2x7.5x3.5cm / 4x3x1.4in
Box Size: Approx. 37x29x9cm / 14.6x11.4x3.5in
Voltage: 100-240V
Package List:1 x Receiver
1 x Transmitter
3 x Antenna
1 x Charger
1 x Aluminium Box (with 2 Buttons)
1 x Manual
Note:Please note that the new type and old type of this product will be sent randomly, and make sure

Features:1. Identify the specific type of metal such as gold, silver, copper, coin by means of a frequency regulator.
2. Detection system with remote search system and precise positioning.
3. Adopts microelectronic processor to control the chip unit calibration and instrument self-inspection system which is quick for scanning and testing, improves the work efficiency, and reduces the labor intensity of the test.
4. This instrument can detect at least 3.5 meters for a 5x5cm object. A 30x30cm object can be detected in 5-8 meters.
5. If the object of this size is buried for a long time, it can be detected in the range of 20 meters. If the area of the object is larger, the depth of detection will be deeper.
Specification:Condition: 100% Brand New
Item Main Color: Rose Gold
Aluminium Box Color: Silver
Search System: Microcomputer CPU Control And Reflection Conductivity
Search Area: Approx. 1400meters / 1531.1yd
Inspection Depth: Approx. 25M / 27.3yd
Energy: 12V 1000-1600mAh
Transmission Frequency: 5.6-6KHz
Signal Frequency: 360-440Hz
Detection Type: Gold; Silver; Copper; Precious Stone, etc.
Charging Method: Built-In Rechargeable Battery, Charge for 5-8 Hours
Receiver Size: Approx. 33.5 x 5cm/13.2 x 2in
Receiver Handle Length: Approx. 11cm/4.3in
Transmitter Size: Approx. 10.2x7.5x3.5cm / 4x3x1.4in
Box Size: Approx. 37x29x9cm / 14.6x11.4x3.5in
Voltage: 100-240V
Package List:1 x Receiver
1 x Transmitter
3 x Antenna
1 x Charger
1 x Aluminium Box (with 2 Buttons)
1 x Manual
Note:Please note that the new type and old type of this product will be sent randomly, and make sure

Features:1. Identify the specific type of metal such as gold, silver, copper, coin by means of a frequency regulator.
2. Detection system with remote search system and precise positioning.
3. Adopts microelectronic processor to control the chip unit calibration and instrument self-inspection system which is quick for scanning and testing, improves the work efficiency, and reduces the labor intensity of the test.
4. This instrument can detect at least 3.5 meters for a 5x5cm object. A 30x30cm object can be detected in 5-8 meters.
5. If the object of this size is buried for a long time, it can be detected in the range of 20 meters. If the area of the object is larger, the depth of detection will be deeper.
Specification:Condition: 100% Brand New
Item Main Color: Rose Gold
Aluminium Box Color: Silver
Search System: Microcomputer CPU Control And Reflection Conductivity
Search Area: Approx. 1400meters / 1531.1yd
Inspection Depth: Approx. 25M / 27.3yd
Energy: 12V 1000-1600mAh
Transmission Frequency: 5.6-6KHz
Signal Frequency: 360-440Hz
Detection Type: Gold; Silver; Copper; Precious Stone, etc.
Charging Method: Built-In Rechargeable Battery, Charge for 5-8 Hours
Receiver Size: Approx. 33.5 x 5cm/13.2 x 2in
Receiver Handle Length: Approx. 11cm/4.3in
Transmitter Size: Approx. 10.2x7.5x3.5cm / 4x3x1.4in
Box Size: Approx. 37x29x9cm / 14.6x11.4x3.5in
Voltage: 100-240V
Package List:1 x Receiver
1 x Transmitter
3 x Antenna
1 x Charger
1 x Aluminium Box (with 2 Buttons)
1 x Manual
Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering!

This liner actuator is a relatively fast-extending actuator available. Typical applications include driving electric gates, automatic windows and other home automation assemblies. The actuator may provide a pushing or pulling force of up to 6000N and a travel speed of up to 5mm/s when under no-load.
Features:With reliable performance, sensitive action stable running.
Good environment adaptability.
High quality metal material, high performance motor, built-in stroke switch.
Maximum push/pull is up to 6000N, and stroke speed is up to 5mm/s when under no-load.
Commonly used in automotive, devices and engineering industry, agricultural machinery, wedding system, industrial electric lifting system, electric bed, surgical bed, traction bed, electric sofa, electric lifting lever, electric booth, electric sunroof, electric wheelchair, etc.
Specification:
Model: JS-TGZ-U3
Material: Metal
Voltage: DC 12V
Maximum push/pull: Approx. 6000n/6000n
Optional stroke: 200mm, 100mm, 250mm, 350mm, 400mm, 450mm, 500mm
No-load speed: Maximum 5mm/s
Rated load rate: 5mm/s(600kg)
Environment temperature: -26°C to 65°C
Standard protection level: IP54
Built-in stroke switch: Yes
Color: Silver
Weight: Approx. 2053g~3280g / 72.4oz~115.7oz
Quantity: 1pc
Package List:1 x Linear Actuator
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
sdfff
Package List:
1 x Linear Actuator

Features:
1. Made of high quality material, great workmanship, durable to use.
2. The moment of force can be reset and automatically stops rotating when the set value is reached
3. The moment of force is strong and it is efficient
4. Small body and it is easy to carry
5. The clockwise(CW) and counterclockwise(CCW) can be adjusted as you need.
6. Suitable for fastening and dismantling of screws in light industry such as machinery manufacturing, hardware auto repair, electromechanical assembly, home repair, etc.
Specification:
Condition: 100% Brand New
Capacity: 2.5-4mm
No Load Speed: 1200rpm
The moment of force: 2-4N.M
Working Pressure: 0.65 (Mpa)
Weight: Approx. 772g / 27.2oz
Package List:
1 * Pneumatic Screwdriver
1 * Screw Bits
1 * Hook

Features:
79G Anti-collision don't need to cut the ground, the installation is simple.
It can distinguish pedestrians and vehicles, with strong anti-interference, safety and reliability.
Wide range of use, most of the road gates in the general market, compatible with straight rod machines, fence machines, curved arms, advertising gates, airborne gates.
Internal circuit adopts high quality electronic components, with stable performance.
The Vehicle Detector is mainly used to detect the existence and passing of vehicles.
Specifications:Condition: Brand New
Color: Shown as Picture
Material: ABS Plastics
Voltage: DC 9 V-36 V (Standard 12 V)
Power Consumption: 1.6W-1.8W
Operating Frequency: 77GHz-81GHz
Response Time: 100ms
Output Signal: Switching Quantity
Vehicle Detection Probability: >99.99%
Pedestrian Detection Probability: >99%
Waterproof Rating: IP67
Detection Distance Range: 0.3m-6m (Adjustable)
Detection Level Range: -1m-1m (Adjustable)
Red Line: Connect 12 V Power Positive
Black Line: Connect GND / Power Supply Negative
Blue Line: the Ground Coil Port of the Gate Controller
Orange Line: Access Gate Controller Common
White Purple Line is Connected to 485, Generally Need to be Connected When Debugging
Package List:1 * Vehicle Detector
1 * Installation Sticker
1 * Mounting Accessories

Our product is the latest face biometric fingerprint recognition access control attendance system. The design of the product strictly follows the national security product standards, adopts a large number of imported components, undergoes strict aging test before leaving factory, which ensures its stable and reliable use. The product also has TCP/IP and RS485 communication methods to meet various network environments. It is suitable for small office environments, corporate interiors and other places.
Features:
Color screen dual cameras, high definition.
Full-featured fingerprint machine and face recognition technology.
Anti-dazzling illumination, can recognize any face under strong light.
Complete secondary development communication development kit to facilitate customer system integration and development.
Matching professional access control and employee attendance software.
Remote user registration for user's actual operation.
Voice broadcast function, real-time rights reporting.
Easy to operate, perspicuous function menu.
High quality, beautiful appearance, attractive price.
Support to externally connect Wiegand card reader.
Specifications:Condition: Brand New
Material: ABS
Main Color: Silver black
Card Reading: 125Khz
Screen: 2.8 inch TFT
Button: 4*4 touch button
Verification Mode: Face, fingerprint, password, IC card or combination
Hardware Platform: ARM9
Recognition Speed: <0.8 seconds
Camera: Dual cameras (infrared color)
IR: 2pcs 3A high power infrared lights
Number of Users: 500
Face Capacity: 500
Fingerprint Capacity: 10000
Card Capacity: 500
Password Capacity:1000
Recording Capacity: 160,000
Network Communication: TCP/IP, USB, U disk
Input Power: 12V 2A
Working Temperature: -10°C ~ 45°C
Working Humidity: 20% ~ 80% RH
Size: Approx.210*88*54mm/8.3*3.5*2.1in
Package Weight: Approx.852g/30.1oz
Package List:1 * Host
1 * IC Card
1 * Black Protective Pad
1 * Screwdriver
1 * Template Positioning Sard
1 * Network Cable Interface
1 * Power Cable
1 * 8 Core Wire
1 * 10 Core Wire
4 * Screw
4 * Expansion Tube
1 * User Manual
1 * CD Guide

Features:1. Made of good quality stainless steel, solid, durable and wear-resistant.
2. Equipped with high power adjustable speed vacuum pump, which can adjust power and speed according to need. It will automatically stop milking when the bucket is full, save time and effort. With exhaust holes, so as to facilitate the heat dissipation of the main engine.
3. This machine is suction type milking machine.
4. Small size, suitable for household use, easy to operate.
5. Comes with milk tube brush, which is easy to clean.
Specifications:Material: Stainless Steel
Color: Silver
Voltage: 100-240V
Capacity: 14L
Options: for Cow US Plug 100-240V, for Cow EU Plug 100-240V, for Sheep US Plug 100-240V, for Sheep EU Plug 100-240V
Packing List:1 * Stainless Steel Milk Bucket
1 * Double Head Milk Lining
1 * Adjustable Speed Vacuum Pump
1 * Power Adapter
1 * Milk Tube Brush
1 * Manual
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Convenient for guests, guests can take a rest at the empty seat after ordering, no need to wait in line at the bar
2. The launching distance of the pager is very far, guests can sit at any location in the store, or they can stroll around nearby, waiting for the food picker to remind to receive the meal
3. The pager is made of ABS engineering plastic material, military quality, exquisite workmanship, durable and durable, long service life, saving store costs
4. Bottom power reminder, with online search, vibration, sound, light rotation and other prompts, can be switched at will, maximum support 999 discs
5. Using imported processing chipset, high-performance noise reduction coding and decoding circuit, fast heat dissipation and strong stability
Specification:
Item Type: Pager
Keyboard Launcher:
Working Voltage: DC12V
Working Frequency: 433.92MHZ
Working Current: 200±30mA
Standby Current: 60±10mA
Coding Method: Studycode
Disc Receiver:
Size: Approx. 69 x 69 x 12mm / 2.7 x 2.7 x 0.5in
Working Voltage: DC3.7V (rechargeable battery)
Charging Voltage: DC5V 4A
Working Frequency: 433.92MHZ
Working Current: 130±20mA
Standby Current: <14±3mA
Decoding Method: Studycode
Battery Capacity: 200mAh
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Keyboard Launcher
10 x Receiver
1 x Charging Base
2 x Power Adapter
1 x User Manual
Note:The receiving distance of the partition wall is 50-100 meters, and the receiving distance of the open area is 1500 meters (the signal can not be added within the distance can be added)

Features:
This is a 5.5W module that could give out 450nm blue light.
Large heat sinks and cooling fan better heat dissipation during work.
Support continuous light output working mode and can work for long time.
This module comes with power adapter for convenient use.
Suitable for industrial engraving machine equipment, great for DIY engravers.
Specifications:
Wavelength: 450nm (blue)
Output Power: 5.5W
Power Supply Voltage: 12VDC
Driving Mode: External ACC constant current drive
AC Adaptor Plug: US
AC Adaptor Input Voltage: 100-240V
Lens Material: Optical with coating
Light Form: Dot, adjustable-focus
Modulation: TTL
PWM Control: Support
Note:
1. Please wear goggles during usage, avoid to the directly to the eyes and skin.
2. The module should works less than half an hour in one time, and continue to work when it cool down please.
Package Includes:
1 x Module
1 x AC Adaptor with US plug

Regolatore controllo intelligente digitale per e regolatore ibrido solare
Features:
Digital intelligent control, adopts high performance chip, it is stable and high efficient.
Adopts boost circuit to solve the charging efficiency of the low-power vertical wind generator.
PWM charging function, PWM unloading function and PWM over current limit function.
LCD screen clearly displays the voltage and electric quantity of the storage battery.
Lightning Protection, Solar Reverse Charge Protection, Battery Open-circuit Protection, Battery Reverse Protection, Over Wind Speed and Over-voltage Soft Automatic Brake Protection, Overload Protection.
Mini size, easy to install.
Specification:Condition: 100% Brand New
Material: Alloy
Rated Voltage: 12V / 24V
Photovoltaic Power: 300W
Wind Dynamo Power: 800W
Charging current: 50A
Ambient Temperature: -25℃- 55℃
Suitable Altitude: ≤5500M
Protection Type: Lightning Protection,Solar Reverse Charge Protection,Battery Open-circuit Protection, Battery Reverse Protection, Over Wind Speed and Over-voltage Soft Automatic Brake Protection, Overload Protection
Control ways: PWM charging function, PWM unloading function, PWM current limiting function
Display way: LCD
Display specification: Voltage, Power, Charging status
Heat dissipation: Radiator
Size: 215*170*95mm / 8.5*6.7*3.7in
Package List:1 * Wind Solar Hybird Controller
1 * User manual
Note:1. Please allow 1-3cm error due to manual measurement, thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos displayed in photos may be showing slightly different from the real object, please take the real one as standard.

SANOU K12-100 Precision Mandrino Autocentrante Per Tornio 4 4 Griffe ø 100mm
Features:
High strength and hardness.
The compact chuck is small volume, easy to be used.
It has a high centering precision as well as a large clamping range.
The chuck is made for meter machine tools in the processing of non-ferrous metals non-metals like plastic and so on.
4-jaw design, self-centering, widely used for woodworking lathe.
Specifications:Model: K12-100
Material: Metal
Chuck Type: 4-jaw chuck
Chuck Structure: Normal
Power Type: Manual
Speed: 4200RPM
Chuck Diameter: 100mm / 3.93inch
Weight: 3499g(approx.)
Package included:1 x Lathe Chuck
4 x Spare Jaws
1 x Wrench
3 x screws