Kereskedelmi, irodai és ipari

 
(Usage 2-channel and 4-channel is the same)
 
Product Name: 4 Channel DC 12V RS485 Relay Module Modbus RTU & AT Command Remote Control Switch for PLC PTZ Camera Security Monitoring
 
 
 
Package inlcuded:
 1 x DC 12V 4Ch RS485 Modbus & AT command  Relay Board
 
 
Description: 
 
1: DC 12V power supply (voltage range 9-13V ) 
 
2: Standby current (all relays closed) 11-13MA, 1 relay open 44MA, 2 relays open 77MA, 3 relays open 110MA,4 relays open 140MA
 
3: "open" "close"  "Momentary" "Self-locking" "Interlock" "Delay" 6 Commands
 
4: Two instruction-control mode : AT command and MODBUS command
 
5: Under the AT command ,the maximum delay is 9999 seconds
  Under the MODBUS command ,the maximum delay is 255 seconds
 
6 AT commands can be made serial HyperTerminal (serial assistant) Enter;
  MODBUS commands can be made serial HyperTerminal (serial assistant)  OR "Modbus Poll" Enter;
 
7 Under the MODBUS command mode, it can support up to 32 devices in parallel
 
8 Size: 80 * 47 * 19.5mm
 
9 Weight: 57g
 
10 Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
 
the new version adds the Read Status command (command 03)
 
For more information, please contact me
 
 
 
Application
Automated industry PLC
Smart Home,Home Automation ,Wiser Home;
Identification system;
Motor FW & BW
 
Typical applications:
 
1 AT command mode (A5 = OFF), in this mode can be through the serial HyperTerminal (serial assistant) enter a simple AT command control relay. AT command mode time up to 9999 seconds 
 
 
2 MODBUS command mode (A5 = ON), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control
 
Wiring Diagram:
 
1 DC 12V control circuit,Wiring diagram below. "LOAD" may be camera,LED lights, fans, motors and other DC 12V equipment
 
 
 
 
2 DC 1-100V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors Lights, fluorescent lights, solar water heaters and other DC AC equipmen
 
3 DC 1-100V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be Machine tool ,CNC,3D Printer,LED lights, fans, motors and other DC AC equipment
 
 
 
Test Software(We offer a demo video):
Serial HyperTerminal:
Modbus Poll
 
 
 
 

 
(Usage 2-channel and 4-channel is the same)
 
Product Name: 4 Channel DC 12V RS485 Relay Module Modbus RTU & AT Command Remote Control Switch for PLC PTZ Camera Security Monitoring
 
 
 
Package inlcuded:
 1 x DC 12V 4Ch RS485 Modbus & AT command  Relay Board
 
 
Description: 
 
1: DC 12V power supply (voltage range 9-13V ) 
 
2: Standby current (all relays closed) 11-13MA, 1 relay open 44MA, 2 relays open 77MA, 3 relays open 110MA,4 relays open 140MA
 
3: "open" "close"  "Momentary" "Self-locking" "Interlock" "Delay" 6 Commands
 
4: Two instruction-control mode : AT command and MODBUS command
 
5: Under the AT command ,the maximum delay is 9999 seconds
  Under the MODBUS command ,the maximum delay is 255 seconds
 
6 AT commands can be made serial HyperTerminal (serial assistant) Enter;
  MODBUS commands can be made serial HyperTerminal (serial assistant)  OR "Modbus Poll" Enter;
 
7 Under the MODBUS command mode, it can support up to 32 devices in parallel
 
8 Size: 80 * 47 * 19.5mm
 
9 Weight: 57g
 
10 Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
 
the new version adds the Read Status command (command 03)
 
For more information, please contact me
 
 
 
Application
Automated industry PLC
Smart Home,Home Automation ,Wiser Home;
Identification system;
Motor FW & BW
 
Typical applications:
 
1 AT command mode (A5 = OFF), in this mode can be through the serial HyperTerminal (serial assistant) enter a simple AT command control relay. AT command mode time up to 9999 seconds 
 
 
2 MODBUS command mode (A5 = ON), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control
 
Wiring Diagram:
 
1 DC 12V control circuit,Wiring diagram below. "LOAD" may be camera,LED lights, fans, motors and other DC 12V equipment
 
 
 
 
2 DC 1-100V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors Lights, fluorescent lights, solar water heaters and other DC AC equipmen
 
3 DC 1-100V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be Machine tool ,CNC,3D Printer,LED lights, fans, motors and other DC AC equipment
 
 
 
Test Software(We offer a demo video):
Serial HyperTerminal:
Modbus Poll
 
 
 
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 12Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 12 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB429;
Power supply : DC9V 6F22 battery (not included )  , 
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK AM ;
Operating frequency:433.92MHZ ;
Encoding format: compatiable for SC2262 SCT2260 PT2262 SC2262 PT2260 PT2264,
RC  Resistance : 4.7M;
Standby current: 0mA
Working current:> 80mA
Transfer rate: <10Kbps
Operating temperature: -10  ~   70 
Size: 136 * 42.2 * 25mm
power switch: the remote control can be turned off when not in use for power saving.
 
Remote distance
We are talking about remote control distance transmitter / receiver module to work alone, and are connected with one quarter of the wavelength of the metal antenna, and in a vertical state operation at rated conditions in open ground straight line measured maximum distance decoding, general , a high-power transmitter module straight road in the city a distance of 1 kilometer. Since the work within the UHF band electromagnetic wave propagation along a straight line, an obstacle will be a drastic attenuation, remote control distance shortened significantly, it should be used to avoid obstacles, or try to stand tall antenna.
 
 
 
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 12Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 12 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB429;
Power supply : DC9V 6F22 battery (not included )  , 
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK AM ;
Operating frequency:433.92MHZ ;
Encoding format: compatiable for SC2262 SCT2260 PT2262 SC2262 PT2260 PT2264,
RC  Resistance : 4.7M;
Standby current: 0mA
Working current:> 80mA
Transfer rate: <10Kbps
Operating temperature: -10  ~   70 
Size: 136 * 42.2 * 25mm
power switch: the remote control can be turned off when not in use for power saving.
 
Remote distance
We are talking about remote control distance transmitter / receiver module to work alone, and are connected with one quarter of the wavelength of the metal antenna, and in a vertical state operation at rated conditions in open ground straight line measured maximum distance decoding, general , a high-power transmitter module straight road in the city a distance of 1 kilometer. Since the work within the UHF band electromagnetic wave propagation along a straight line, an obstacle will be a drastic attenuation, remote control distance shortened significantly, it should be used to avoid obstacles, or try to stand tall antenna.
 
 
 
 

Matching Keyfob:  Click here
 
 
Typical applications:
DC 12V Home lighting system 
Remote control switch
Smart Home / Home Automation
Garage Door
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V Electrical equipment
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
  
Product Name : 433M DC 12V one Channel RF Wireless Controller Relay Switch with Delay Momentary Toggle Latch Functions for EV1527 PT2262 ASK
 
Packing list:
1 PCS 433M DC 12V 1 Channel Delay relay

 
 
Features:
 
1 Operating voltage: DC 9-13V (recommended DC 12V);5V version can be customized
 
2 Operating Current: relays close, about 9MA; relay open,about 42MA;
 
3 Operating frequency: 433.92M; 315M version can be customized                 
 
4 Receiver sensitivity : -108dBm
 
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC
 
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
 
Work mode
NO          : Relay normally open contact
COM       : Relay common contact
NC          : Relay normally closed contact
Open       : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary  : Press the Transmitter button , the receiver relay is Open, release button;the relay  is Close;
Toggle        : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay  is Close;
Latched       : Press transmitter button A, the receiver relay is Open  Press transmitter button B, the receiver relay is Close.
Delay           : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay  is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note: 
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
 In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
  
 
 

Matching Keyfob:  Click here
 
 
Typical applications:
DC 12V Home lighting system 
Remote control switch
Smart Home / Home Automation
Garage Door
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V Electrical equipment
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
  
Product Name : 433M DC 12V one Channel RF Wireless Controller Relay Switch with Delay Momentary Toggle Latch Functions for EV1527 PT2262 ASK
 
Packing list:
1 PCS 433M DC 12V 1 Channel Delay relay

 
 
Features:
 
1 Operating voltage: DC 9-13V (recommended DC 12V);5V version can be customized
 
2 Operating Current: relays close, about 9MA; relay open,about 42MA;
 
3 Operating frequency: 433.92M; 315M version can be customized                 
 
4 Receiver sensitivity : -108dBm
 
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC
 
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
 
Work mode
NO          : Relay normally open contact
COM       : Relay common contact
NC          : Relay normally closed contact
Open       : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary  : Press the Transmitter button , the receiver relay is Open, release button;the relay  is Close;
Toggle        : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay  is Close;
Latched       : Press transmitter button A, the receiver relay is Open  Press transmitter button B, the receiver relay is Close.
Delay           : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay  is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note: 
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
 In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
  
 
 

Matching Keyfob:  Click here
 
 
Typical applications:
DC 12V Home lighting system 
Remote control switch
Smart Home / Home Automation
Garage Door
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V Electrical equipment
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment
 
  
Product Name : 433M DC 12V one Channel RF Wireless Controller Relay Switch with Delay Momentary Toggle Latch Functions for EV1527 PT2262 ASK
 
Packing list:
1 PCS 433M DC 12V 1 Channel Delay relay

 
 
Features:
 
1 Operating voltage: DC 9-13V (recommended DC 12V);5V version can be customized
 
2 Operating Current: relays close, about 9MA; relay open,about 42MA;
 
3 Operating frequency: 433.92M; 315M version can be customized                 
 
4 Receiver sensitivity : -108dBm
 
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC
 
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 OR Pt2262 remotes to re-learn;
 
 
Work mode
NO          : Relay normally open contact
COM       : Relay common contact
NC          : Relay normally closed contact
Open       : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary  : Press the Transmitter button , the receiver relay is Open, release button;the relay  is Close;
Toggle        : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay  is Close;
Latched       : Press transmitter button A, the receiver relay is Open  Press transmitter button B, the receiver relay is Close.
Delay           : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay  is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note: 
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
 In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
  
 
 

 
 
 

Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Product Name:2x DC DC Converter USB 5V to HX2.54 6V-15V Adjustable Output Step-Up Boost Voltage conversion Module for Portable mobile power
 
Packing list 
2 pcs USB 5V to 6-15.5V DC DC Converter (input DC 3-6V , output DC 6-15.5V) ;
Description: 
 
Input voltage 3~6V, output 6-15.5V
Maximum input current :  1.4A
Long-term work Current : 1A
Conversion efficiency : 79-90%
  
Input   :  USB  Male  Interface, DC 3-6V;  
 
Ouput :  2 PIN  XH2.54,  DC 6-15.5V; 
If input dc 5v,output 6-15.5V Adjustable
 
Power :  Maximum 7W;
  
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius .
Size 47.5mm x 16mm
Weight : about 4.5g(light)
  
Applications:
 
6V 8V 9V 12V 15V Low Power Motor
6-15V LED Lighting
Hard drive power supply
9V 12V 15V Routers and network equipment
Wireless communication equipment
315M 433M Wireless remote controller
 
  
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
    
Modify Parameter Description:   
 
1.4A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 Degrees Celsius. The power MOSFET wake up when the junction emperature drops 30 Degrees Celsius under the OTP threshold temperature
The master chip is FP6291(Made in Taiwan)
 
 
Application :

 
 
 

Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Product Name:2x DC DC Converter USB 5V to HX2.54 6V-15V Adjustable Output Step-Up Boost Voltage conversion Module for Portable mobile power
 
Packing list 
2 pcs USB 5V to 6-15.5V DC DC Converter (input DC 3-6V , output DC 6-15.5V) ;
Description: 
 
Input voltage 3~6V, output 6-15.5V
Maximum input current :  1.4A
Long-term work Current : 1A
Conversion efficiency : 79-90%
  
Input   :  USB  Male  Interface, DC 3-6V;  
 
Ouput :  2 PIN  XH2.54,  DC 6-15.5V; 
If input dc 5v,output 6-15.5V Adjustable
 
Power :  Maximum 7W;
  
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius .
Size 47.5mm x 16mm
Weight : about 4.5g(light)
  
Applications:
 
6V 8V 9V 12V 15V Low Power Motor
6-15V LED Lighting
Hard drive power supply
9V 12V 15V Routers and network equipment
Wireless communication equipment
315M 433M Wireless remote controller
 
  
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
    
Modify Parameter Description:   
 
1.4A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 Degrees Celsius. The power MOSFET wake up when the junction emperature drops 30 Degrees Celsius under the OTP threshold temperature
The master chip is FP6291(Made in Taiwan)
 
 
Application :

Below item is powered by Canton-Power Ltd .
 
Product Name: 5pcs 2 in 1 DC DC Step-Down & Step-Up Converter 0.8V-6V to 3.3V Power for Wifi Bluetooth ESP8266 HC-05 CC1101 LED Module
  
Packing list:
5 PCS DD0603SA_3V3 0.9-6V TO 3.3V DC DC Step-UP Step-Down Converter Board
Description:
Input voltage DC 0.9 ~ 6V, output DC 3.3V( -5% )
 
The maximum input voltage can not exceed 6.5V
 
Auto Buck-Boost Converter Module working frequency 1MHZ.efficiency 61% -86% .
 
Operating temperature range : -25~ 85 Degrees Celsius
 
Storage temperature range : -45~ 125 Degrees Celsius
 
2.54mm pin pitch,MCU Development Board Breadboard friendly.
 
Size : 22mm x 15mm x 5.7mm(Very small)
 
Weight : 2.6g(Very light)
 
Applications
Battery powered equipment
Breadboard Power Supply
ARM FPGA CPLD MCU Development board
ESP8266 nrf24l01 atmega328
electrical tools
Small power motors
Camera, Video camera
Toy car
power bank
LED Lighting
Wireless communication equipment
Audio equipment
 
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
Q & A:
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
 
 
 
 
 

Below item is powered by Canton-Power Ltd .
 
Product Name: 5pcs 2 in 1 DC DC Step-Down & Step-Up Converter 0.8V-6V to 3.3V Power for Wifi Bluetooth ESP8266 HC-05 CC1101 LED Module
  
Packing list:
5 PCS DD0603SA_3V3 0.9-6V TO 3.3V DC DC Step-UP Step-Down Converter Board
Description:
Input voltage DC 0.9 ~ 6V, output DC 3.3V( -5% )
 
The maximum input voltage can not exceed 6.5V
 
Auto Buck-Boost Converter Module working frequency 1MHZ.efficiency 61% -86% .
 
Operating temperature range : -25~ 85 Degrees Celsius
 
Storage temperature range : -45~ 125 Degrees Celsius
 
2.54mm pin pitch,MCU Development Board Breadboard friendly.
 
Size : 22mm x 15mm x 5.7mm(Very small)
 
Weight : 2.6g(Very light)
 
Applications
Battery powered equipment
Breadboard Power Supply
ARM FPGA CPLD MCU Development board
ESP8266 nrf24l01 atmega328
electrical tools
Small power motors
Camera, Video camera
Toy car
power bank
LED Lighting
Wireless communication equipment
Audio equipment
 
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
Q & A:
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
 
 
 
 
 

 
Typical applications:
DC 5V Home lighting system 
Remote control switch
Smart Home / Home Automation
Garage Door
Fluorescent lamp Illumination
Motorcycle Electromobile
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 5 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 5V control circuit,Wiring diagram below. "LOAD" may be LED lamp, fans, motors and other DC 5V Electrical equipment
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 5V load, need another DC 5V power supply). "LOAD" may be LED lamp, fans, motors and other DC AC equipment
  
Product Name : 5V Delay remote control relay Smart Home Kit 433M Multifunction ON/OFF Switch with Timing Non-locking Self-locking Inter-locking
 
Packing list:
1 PCS 433M DC 5V one Channel Delay Switch
1 PCS  433M   Large Power 2 Button EV1527  Remote Control (USE 12V 27A battery,Batteries not included)
 
receiver Features:
 
1 Operating voltage:  DC 5V;
 
2 Operating Current: relays close, about 11MA; relay open,about 80MA;
 
3 Operating frequency: 433.92M;                  
 
4 Receiver sensitivity : -108dBm
 
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC
 
 
Work mode
NO          : Relay normally open contact
COM       : Relay common contact
NC          : Relay normally closed contact
Open       : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary  : Press the Transmitter button , the receiver relay is Open, release button;the relay  is Close;
Toggle        : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay  is Close;
Latched       : Press transmitter button A, the receiver relay is Open  Press transmitter button B, the receiver relay is Close.
Delay           : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay  is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note: 
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
 In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
 
Power supply : 12V 27A battery   replacable  . (This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 

 
Typical applications:
DC 5V Home lighting system 
Remote control switch
Smart Home / Home Automation
Garage Door
Fluorescent lamp Illumination
Motorcycle Electromobile
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 5 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 5V control circuit,Wiring diagram below. "LOAD" may be LED lamp, fans, motors and other DC 5V Electrical equipment
 
 
 
 
Wiring Diagram 2:
DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 5V load, need another DC 5V power supply). "LOAD" may be LED lamp, fans, motors and other DC AC equipment
  
Product Name : 5V Delay remote control relay Smart Home Kit 433M Multifunction ON/OFF Switch with Timing Non-locking Self-locking Inter-locking
 
Packing list:
1 PCS 433M DC 5V one Channel Delay Switch
1 PCS  433M   Large Power 2 Button EV1527  Remote Control (USE 12V 27A battery,Batteries not included)
 
receiver Features:
 
1 Operating voltage:  DC 5V;
 
2 Operating Current: relays close, about 11MA; relay open,about 80MA;
 
3 Operating frequency: 433.92M;                  
 
4 Receiver sensitivity : -108dBm
 
5 Decode  : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC
 
 
Work mode
NO          : Relay normally open contact
COM       : Relay common contact
NC          : Relay normally closed contact
Open       : NO connection COM, NC disconnect COM
Close      : NO disconnect COM, NC connection COM
Momentary  : Press the Transmitter button , the receiver relay is Open, release button;the relay  is Close;
Toggle        : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay  is Close;
Latched       : Press transmitter button A, the receiver relay is Open  Press transmitter button B, the receiver relay is Close.
Delay           : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay  is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold  the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note: 
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
 In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
 
Power supply : 12V 27A battery   replacable  . (This remote doesnot have a battery , Please buy in your local market )
Operating current:  ≤ 12mA ;
Oscillation mode:  SAW resonator ;
Oscillation resistor : 330K
Modulation mode: ASK OOK ;
Operating frequency: 433.92MHz  ;
Frequency dev iation: ±0.2MHz ;
Encoding format: Million  Group Code (  EV1527 ) ;
Transmit power: 10 mW.
Data Rate : 50~60KHZ;
  
 
 

 
 
 
 
Product Name:5pcs dc dc boost converter 3.3V 3.7V 4.5V 5V 6V to 12V Step Up Module for Motor LED Solar charger
 
Packing list 
5 pcs USB to xh2.54  5V to 12V DC DC Converter (input DC 3-6V , output DC 12V -5% ) ;
5 pcs  XH2.54 2 Pin 20cm Power Wire Cable
Description: 
 
Input voltage 3~6V, output 12V (deviation -5% )
Maximum input current :  1.2A
Long-term work Current : 1A
Conversion efficiency : 78-90%
  
Start Voltage 2.8V, Output Current 50MA
  
INPUT 3V 1A;    OUTPUT  12V 210MA
INPUT 3.3V 1A;  OUTPUT  12V 250MA
INPUT 3.7V 1A;  OUTPUT  12V 280MA
INPUT 4.5V 1A;  OUTPUT  12V 340MA
INPUT 5V 1A;    OUTPUT  12V 370MA
INPUT 6V 1A;    OUTPUT  12V 440MA
  
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius .
Size 42mm x 15mm x 5.6mm(small)
Weight : about 5.6g(light)
    
Applications:
12V Low Power Motor
12V Low Power Fan
LED Lighting
12V Relay board
Wireless communication equipment
315M 433M Wireless remote controller
  
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
 
 Modify Parameter Description:   
1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 Degrees Celsius. The power MOSFET wake up when the junction emperature drops 30 Degrees Celsius under the OTP threshold temperature
The master chip is FP6291GLR
  
This module supports sleep mode, remove the LED indicator the sleep current 50mA,250-350 mA current can support the one-year standby mode! The micropower environment more suitable for special use .

 
 
 
 
Product Name:5pcs dc dc boost converter 3.3V 3.7V 4.5V 5V 6V to 12V Step Up Module for Motor LED Solar charger
 
Packing list 
5 pcs USB to xh2.54  5V to 12V DC DC Converter (input DC 3-6V , output DC 12V -5% ) ;
5 pcs  XH2.54 2 Pin 20cm Power Wire Cable
Description: 
 
Input voltage 3~6V, output 12V (deviation -5% )
Maximum input current :  1.2A
Long-term work Current : 1A
Conversion efficiency : 78-90%
  
Start Voltage 2.8V, Output Current 50MA
  
INPUT 3V 1A;    OUTPUT  12V 210MA
INPUT 3.3V 1A;  OUTPUT  12V 250MA
INPUT 3.7V 1A;  OUTPUT  12V 280MA
INPUT 4.5V 1A;  OUTPUT  12V 340MA
INPUT 5V 1A;    OUTPUT  12V 370MA
INPUT 6V 1A;    OUTPUT  12V 440MA
  
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius .
Size 42mm x 15mm x 5.6mm(small)
Weight : about 5.6g(light)
    
Applications:
12V Low Power Motor
12V Low Power Fan
LED Lighting
12V Relay board
Wireless communication equipment
315M 433M Wireless remote controller
  
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
 
 Modify Parameter Description:   
1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 Degrees Celsius. The power MOSFET wake up when the junction emperature drops 30 Degrees Celsius under the OTP threshold temperature
The master chip is FP6291GLR
  
This module supports sleep mode, remove the LED indicator the sleep current 50mA,250-350 mA current can support the one-year standby mode! The micropower environment more suitable for special use .

Below item is powered by Canton-electronics Ltd .
 
 
Qty: 1 pcs step-up modules (input DC 1~5V , output DC 5V ) ;
 
Description: 
 
 
Note: The output current is no current limit! is capable of carrying up to 2A peak input current, But output power cannot exceed 5W ,otherwise the heat will become big problems!
Tips: This module supports sleep mode, remove the LED indicator the sleep current 50mA,250-350 mA current can support the one-year standby mode! The micropower environment more suitable for special use .
 
 
Attention : 
1: Boost modules or buck module indicate the operating voltage, Please donot exceed operating voltage , or it will be damaged easily !
2: Boost module output voltage can only be greater than or equal to input voltage, cannot be less than the input voltage!
3: Buck module input voltage must be higher than output voltage of 1.5V or 2V, otherwise it can not output enough power!
4: Automatic Adjustable Boost or Buck module has start voltage and limit working voltage, Please donot exceed them , or it will be damaged easily !
5: Cannot reverse polarity , or it will be short circuit, or will be  born easily !
 
 
 
Application : 
 
 

Below item is powered by Canton-electronics Ltd .
 
 
Qty: 1 pcs step-up modules (input DC 1~5V , output DC 5V ) ;
 
Description: 
 
 
Note: The output current is no current limit! is capable of carrying up to 2A peak input current, But output power cannot exceed 5W ,otherwise the heat will become big problems!
Tips: This module supports sleep mode, remove the LED indicator the sleep current 50mA,250-350 mA current can support the one-year standby mode! The micropower environment more suitable for special use .
 
 
Attention : 
1: Boost modules or buck module indicate the operating voltage, Please donot exceed operating voltage , or it will be damaged easily !
2: Boost module output voltage can only be greater than or equal to input voltage, cannot be less than the input voltage!
3: Buck module input voltage must be higher than output voltage of 1.5V or 2V, otherwise it can not output enough power!
4: Automatic Adjustable Boost or Buck module has start voltage and limit working voltage, Please donot exceed them , or it will be damaged easily !
5: Cannot reverse polarity , or it will be short circuit, or will be  born easily !
 
 
 
Application : 
 
 

Product Name :       12W HV DC-DC Converter 80V 72V 64V 60V 48V 36V 24V to 15V Buck Step-Down Module Voltage Regulator Board         
    
  Packing list:
 
1 PCS   High-Voltage  17-80V to 15V DC-DC Converter Buck Module
    
 
Description: 
    
Input voltage 17~80V,output 15V
 
Maximum output current 0.75A
 
DC-DC high-voltage Step-Down Converter module working frequency 150KHz.
Maximum conversion efficiency is 85% .
 
Quiescent current: about 2.5mA
 
Operating Temperature : –40°C to 85°C
 
Size : 59 x 30 x 16mm
 
Weight : 19g;
 
Features :
 
1 Input reverse polarity protection
2 TVS overvoltage protection
3 High frequency filter capacitor
4 High Q value 100UH inductance
5 Output overcurrent protection
6 Over temperature protection
7 Output short circuit protection
  
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
  
Applications:
  
Electric bicycle motorcycle
Ebike Controller Power Supply
DC 80V 72V 64V 60V 48V 36V 24V 
CCTV camera
RS485 Modbus equipment
Motor ​Toy Wifi Router
Telecom / Networking Equipment
Multimeter instrumentation
Electric toys
Wifi Bluetooth Wireless Controller RF Relay Board Power Supply
Smart home / home automation LED
Battery powered equipment
 
 
 

Product Name :       12W HV DC-DC Converter 80V 72V 64V 60V 48V 36V 24V to 15V Buck Step-Down Module Voltage Regulator Board         
    
  Packing list:
 
1 PCS   High-Voltage  17-80V to 15V DC-DC Converter Buck Module
    
 
Description: 
    
Input voltage 17~80V,output 15V
 
Maximum output current 0.75A
 
DC-DC high-voltage Step-Down Converter module working frequency 150KHz.
Maximum conversion efficiency is 85% .
 
Quiescent current: about 2.5mA
 
Operating Temperature : –40°C to 85°C
 
Size : 59 x 30 x 16mm
 
Weight : 19g;
 
Features :
 
1 Input reverse polarity protection
2 TVS overvoltage protection
3 High frequency filter capacitor
4 High Q value 100UH inductance
5 Output overcurrent protection
6 Over temperature protection
7 Output short circuit protection
  
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
  
Applications:
  
Electric bicycle motorcycle
Ebike Controller Power Supply
DC 80V 72V 64V 60V 48V 36V 24V 
CCTV camera
RS485 Modbus equipment
Motor ​Toy Wifi Router
Telecom / Networking Equipment
Multimeter instrumentation
Electric toys
Wifi Bluetooth Wireless Controller RF Relay Board Power Supply
Smart home / home automation LED
Battery powered equipment
 
 
 

Qty :  1 pcs 8 Button Fixed code remote ;
 
 
Features / Specifications :
1. 8 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB4223;
Power supply : 12V 23A battery (not included ) 
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format:  EV1527  fixed code ; 
Transmit power : 200mW ;

Qty :  1 pcs 8 Button Fixed code remote ;
 
 
Features / Specifications :
1. 8 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB4223;
Power supply : 12V 23A battery (not included ) 
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format:  EV1527  fixed code ; 
Transmit power : 200mW ;

Product Name :      EBike HV High-Voltage DC-DC Converter DC 48V 36V to 3.3V Buck Step-Down Module Power Supply Board
    
  Packing list:
 
1 PCS   HV 10-80V to 3.3V DC-DC Converter Buck Module
    
 
Description: 
    
Input voltage 10~80V,output 3.3V
 
Maximum output current 1A
 
DC-DC high-voltage Step-Down Converter module working frequency 150KHz.
Maximum conversion efficiency is 85% .
 
Quiescent current: about 2.5mA
 
Operating Temperature : –40°C to 85°C
 
Size : 59 x 30 x 16mm
 
Weight : 19g;
 
Features :
 
1 input reverse polarity protection
2 TVS overvoltage protection
3 high frequency filter capacitor
4 high Q value 100UH inductance
5 Output overcurrent protection
6 Over temperature protection
7 Output short circuit protection
  
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
  
Applications:
  
Electric bicycle motorcycle
Ebike Controller Power Supply
DC 80V 72V 64V 60V 48V 36V 24V 
CCTV camera
RS485 Modbus equipment
Motor ​Toy Wifi Router
Telecom / Networking Equipment
Multimeter instrumentation
Electric toys
Smart home / home automation
Battery powered equipment
 
 
 
 

Product Name :      EBike HV High-Voltage DC-DC Converter DC 48V 36V to 3.3V Buck Step-Down Module Power Supply Board
    
  Packing list:
 
1 PCS   HV 10-80V to 3.3V DC-DC Converter Buck Module
    
 
Description: 
    
Input voltage 10~80V,output 3.3V
 
Maximum output current 1A
 
DC-DC high-voltage Step-Down Converter module working frequency 150KHz.
Maximum conversion efficiency is 85% .
 
Quiescent current: about 2.5mA
 
Operating Temperature : –40°C to 85°C
 
Size : 59 x 30 x 16mm
 
Weight : 19g;
 
Features :
 
1 input reverse polarity protection
2 TVS overvoltage protection
3 high frequency filter capacitor
4 high Q value 100UH inductance
5 Output overcurrent protection
6 Over temperature protection
7 Output short circuit protection
  
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
  
Applications:
  
Electric bicycle motorcycle
Ebike Controller Power Supply
DC 80V 72V 64V 60V 48V 36V 24V 
CCTV camera
RS485 Modbus equipment
Motor ​Toy Wifi Router
Telecom / Networking Equipment
Multimeter instrumentation
Electric toys
Smart home / home automation
Battery powered equipment
 
 
 
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 3Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 3 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB421;
Power supply : 12V 23A battery (not included )
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 ;
RC  Resistance : 330K; 
Transmit power : 200mW ;
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 3Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 3 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB421;
Power supply : 12V 23A battery (not included )
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 ;
RC  Resistance : 330K; 
Transmit power : 200mW ;
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 4Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 4 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB420;
Power supply : 12V 23A battery (not included )  ,
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 ;
RC  Resistance : 330K; 
Transmit power : 200mW ;
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 4Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 4 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB420;
Power supply : 12V 23A battery (not included )  ,
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 ;
RC  Resistance : 330K; 
Transmit power : 200mW ;
 

 
 
Qty :  1 pcs 6Button Fixed code remote ;
 
 
Features / Specifications :
1. 6 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB424;
Power supply : 12V 23A battery (not included ) 
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 fixed code ;
Transmit power : 200mW ;

 
 
Qty :  1 pcs 6Button Fixed code remote ;
 
 
Features / Specifications :
1. 6 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB424;
Power supply : 12V 23A battery (not included ) 
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 fixed code ;
Transmit power : 200mW ;

 
 
 
Note: 
This PT2262 remote is not a garage door cloning remote , DOESNOT  have Learning Function , CANNOT copy your existing remote 
 
This is our company wireless control receivers Accessories
If used in other applications, please read the the parameters carefully before purchase
 
 
433M 3 Key PT2262 ASK OOK KeyFob Transmitter:
 
Technical Data :
Power supply : DC 12V 23A battery   . (This remote doesnot have a battery , Please buy in your local market );
Operating current: 9 mA;
Oscillation mode:  SAW resonator;
Modulation mode: ASK/OOK;
Operating frequency :  433.92MHZ  ;
Encoding IC : SC2262 OR compatiable IC;
Output power :   60MW;
RC Resistance :  4.7M ;
 

 
 
 
Note: 
This PT2262 remote is not a garage door cloning remote , DOESNOT  have Learning Function , CANNOT copy your existing remote 
 
This is our company wireless control receivers Accessories
If used in other applications, please read the the parameters carefully before purchase
 
 
433M 3 Key PT2262 ASK OOK KeyFob Transmitter:
 
Technical Data :
Power supply : DC 12V 23A battery   . (This remote doesnot have a battery , Please buy in your local market );
Operating current: 9 mA;
Oscillation mode:  SAW resonator;
Modulation mode: ASK/OOK;
Operating frequency :  433.92MHZ  ;
Encoding IC : SC2262 OR compatiable IC;
Output power :   60MW;
RC Resistance :  4.7M ;
 

 
Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Product Name:2x 7W USB 5V to 9V 12V 15V Adjustable DC DC Converter Step Up Boost Module for LED Moter Wireless controller Solar Charger
 
Packing list :
2 pcs 7W USB to USB Adjustable Output Step UP Converter
 
 
 
Description: 
 
Input voltage 3~6V, output 6-15.5V
Maximum input current :  1.4A
Long-term work Current : 1A
Conversion efficiency : 79-90%
  
Input   :  USB  Male  Interface, DC 3-6V;  
Ouput :   USB Fem ale  Interface ,  DC 6-15.5V; 
If input dc 5v,output 6-15.5V Adjustable
 
Power :  Maximum 7W;
  
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius  .
Size 56mm x 16mm
Weight : about 6g(light)
Attention :
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
 
Q & A:
 
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
Application :
Packing list does not include USB Charger/routers/mobile power
Modify Parameter Description:   
 
1.4A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 Degrees Celsius. The power MOSFET wake up when the junction emperature drops 30 Degrees Celsius under the OTP threshold temperature
The master chip is FP6291(Made in Taiwan)

 
Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
Product Name:2x 7W USB 5V to 9V 12V 15V Adjustable DC DC Converter Step Up Boost Module for LED Moter Wireless controller Solar Charger
 
Packing list :
2 pcs 7W USB to USB Adjustable Output Step UP Converter
 
 
 
Description: 
 
Input voltage 3~6V, output 6-15.5V
Maximum input current :  1.4A
Long-term work Current : 1A
Conversion efficiency : 79-90%
  
Input   :  USB  Male  Interface, DC 3-6V;  
Ouput :   USB Fem ale  Interface ,  DC 6-15.5V; 
If input dc 5v,output 6-15.5V Adjustable
 
Power :  Maximum 7W;
  
DC-DC Boost module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius  .
Size 56mm x 16mm
Weight : about 6g(light)
Attention :
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
 
Q & A:
 
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
Application :
Packing list does not include USB Charger/routers/mobile power
Modify Parameter Description:   
 
1.4A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150 Degrees Celsius. The power MOSFET wake up when the junction emperature drops 30 Degrees Celsius under the OTP threshold temperature
The master chip is FP6291(Made in Taiwan)

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 2Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 2 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB423;
Power supply : 12V 23A battery (not included )  ,
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 ;
RC  Resistance : 330K; 
Transmit power : 200mW ;

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 2Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 2 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB423;
Power supply : 12V 23A battery (not included )  ,
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 ;
RC  Resistance : 330K; 
Transmit power : 200mW ;

 
Product Name:     10W 2 in 1 Charger & Boost DC DC Converter Step-up Module Board Charge in 4.5-6.5V Boost out 6V
 
 
 
 
Packing list:
 
1 PCS DD04CVSB_6V 10W charge and Discharger boost modules output 6V
 
  
 
Description: 
   
10W charge and Discharger(boost) modules
  
Charge voltage :  DC 5V (  4.6V-6.5V  )
Charging current : 0-1A 
Full charge voltage : 4.2V -2% .
Led indicator : "OK" LED is fully charged OR battery failure status indicator;
                        "CR" LED is charge status indicator
  
Discharge current : 0-3.5A;
Discharge quiescent current : 200uA
Discharge conversion efficiency : 78% -91%
  
Output current    : 0-1.6A(6V);
  
Operating ambient temperature :  -40° to 85°
Storage temperature :  -65° to 125°
 
Size: 28 x 18 x 6.3mm
Weight : 2.7g
  
Note :
1 This module without lithium battery over-discharge protection,
Matching protection board Click here to buy  
2 In order to achieve more than 5W, it is recommended to use two or more batteries in parallel
 
Applications:
Battery powered equipment
Lithium Battery 18650 14500
Mobile phone diy
UPS power supply equipment diy
Solar charging
MP3/MP4 player
Audio equipment
Video equipment
Portable Devices
Bluetooth Wifi Applications
Electric toys
 

 
 
 
 
 

 
Product Name:     10W 2 in 1 Charger & Boost DC DC Converter Step-up Module Board Charge in 4.5-6.5V Boost out 6V
 
 
 
 
Packing list:
 
1 PCS DD04CVSB_6V 10W charge and Discharger boost modules output 6V
 
  
 
Description: 
   
10W charge and Discharger(boost) modules
  
Charge voltage :  DC 5V (  4.6V-6.5V  )
Charging current : 0-1A 
Full charge voltage : 4.2V -2% .
Led indicator : "OK" LED is fully charged OR battery failure status indicator;
                        "CR" LED is charge status indicator
  
Discharge current : 0-3.5A;
Discharge quiescent current : 200uA
Discharge conversion efficiency : 78% -91%
  
Output current    : 0-1.6A(6V);
  
Operating ambient temperature :  -40° to 85°
Storage temperature :  -65° to 125°
 
Size: 28 x 18 x 6.3mm
Weight : 2.7g
  
Note :
1 This module without lithium battery over-discharge protection,
Matching protection board Click here to buy  
2 In order to achieve more than 5W, it is recommended to use two or more batteries in parallel
 
Applications:
Battery powered equipment
Lithium Battery 18650 14500
Mobile phone diy
UPS power supply equipment diy
Solar charging
MP3/MP4 player
Audio equipment
Video equipment
Portable Devices
Bluetooth Wifi Applications
Electric toys
 

 
 
 
 
 

Below item is powered by Canton-Power Ltd.
 
Product Name:  5PCS 2.6-6V TO 3-15V DC DC Boost Adjustable Converter for LED driver 18650 Lithium battery portable charger
  
Packing list:
 
5 PCS DD06AJSB 2.7V-6V TO 3-15V adjustable Step-up Boost Module
  
Description:
   
Input voltage 2.7~6V,output 3~15V adjustable
Maximum input current :  1.4A
Long-term work Current : 1.2A
Conversion efficiency :79-90%
   
DC-DC Boost Converter module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius
FPGA/CPLD AVR  Development Board friendly.
 
Size 20mm x 10.16mm x 5.6mm(Very small)
Weight : about 1.2g(Very light)
 
Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
 
Start Voltage 2.7V, Output Current 10MA
Input  Voltage

Input  Current

Output  Voltage

Output  Curren
2.8V

0.94A

3V

0.7A
2.8V

1.05A

3.3V

0.7A
3V

0.93A

3.26V

0.7A
2.8V

1A

3.72V

0.63A
3V

1.16A

3.7V

0.77A
3.3V

1A

3.7V

0.74A
2.8V

1A

4.5V

0.52A
3V

1.15A

4.52V

0.62A
3.3V

1.2A

4.5V

0.72A
3.7V

1.2A

4.49V

0.83A
2.8V

1A

5.07V

0.46A
3V

1.13A

5.06V

0.55A
3.3V

1.2A

5.04V

0.66A
3.7V

1.23A

5.02V

0.76A
4.5V

1A

5V

0.79A
 
     
2.8V

1A

6.09V

0.38A
3V

1.12A

6.10V

0.46A
3.3V

1.22A

6.08V

0.54A
3.7V

1.22A

6.06V

0.63A
4.5V

1.2A

6.03V

0.78A
5V

1.3A

6.00V

0.95A
2.8V

0.64A

9.11V

0.17A
3V

0.78A

9.12V

0.22A
3.3V

0.98A

9.14V

0.3A
3.7V

1.20A

9.15V

0.41A
4.5V

1.32A

9.16V

0.56A
5V

1.3A

9.15V

0.63A
6V

1.2A

9.11V

0.71A
3V

0.15A

12.15V

0.03A
3.3V

0.51A

12.18V

0.12A
3.7V

0.87A

12.23V

0.23A
4.5V

1.33A

12.16V

0.42A
5V

1.4A

12.16V

0.5A
6V

1.2A

12.17V

0.53A
 
 
Applications
 
MCU Development Board,FPGA/CPLD UNO MEGA2560 DUE 8051 AVR C8051 etc
PLC  RS485 Modbus RTU
9-12V Network equipment/Router
Temperature and humidity sensor
LED Lighting
portable charger
Instruments and meters
5V 6V 9V 12V Relay board
Wireless communication equipment
315M 433M Wireless remote controller
 
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
 
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
how to use:
With a suitable screwdriver, slowly rotating adjustable resistance
 
 
 

Below item is powered by Canton-Power Ltd.
 
Product Name:  5PCS 2.6-6V TO 3-15V DC DC Boost Adjustable Converter for LED driver 18650 Lithium battery portable charger
  
Packing list:
 
5 PCS DD06AJSB 2.7V-6V TO 3-15V adjustable Step-up Boost Module
  
Description:
   
Input voltage 2.7~6V,output 3~15V adjustable
Maximum input current :  1.4A
Long-term work Current : 1.2A
Conversion efficiency :79-90%
   
DC-DC Boost Converter module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius
FPGA/CPLD AVR  Development Board friendly.
 
Size 20mm x 10.16mm x 5.6mm(Very small)
Weight : about 1.2g(Very light)
 
Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
 
Start Voltage 2.7V, Output Current 10MA
Input  Voltage

Input  Current

Output  Voltage

Output  Curren
2.8V

0.94A

3V

0.7A
2.8V

1.05A

3.3V

0.7A
3V

0.93A

3.26V

0.7A
2.8V

1A

3.72V

0.63A
3V

1.16A

3.7V

0.77A
3.3V

1A

3.7V

0.74A
2.8V

1A

4.5V

0.52A
3V

1.15A

4.52V

0.62A
3.3V

1.2A

4.5V

0.72A
3.7V

1.2A

4.49V

0.83A
2.8V

1A

5.07V

0.46A
3V

1.13A

5.06V

0.55A
3.3V

1.2A

5.04V

0.66A
3.7V

1.23A

5.02V

0.76A
4.5V

1A

5V

0.79A
 
     
2.8V

1A

6.09V

0.38A
3V

1.12A

6.10V

0.46A
3.3V

1.22A

6.08V

0.54A
3.7V

1.22A

6.06V

0.63A
4.5V

1.2A

6.03V

0.78A
5V

1.3A

6.00V

0.95A
2.8V

0.64A

9.11V

0.17A
3V

0.78A

9.12V

0.22A
3.3V

0.98A

9.14V

0.3A
3.7V

1.20A

9.15V

0.41A
4.5V

1.32A

9.16V

0.56A
5V

1.3A

9.15V

0.63A
6V

1.2A

9.11V

0.71A
3V

0.15A

12.15V

0.03A
3.3V

0.51A

12.18V

0.12A
3.7V

0.87A

12.23V

0.23A
4.5V

1.33A

12.16V

0.42A
5V

1.4A

12.16V

0.5A
6V

1.2A

12.17V

0.53A
 
 
Applications
 
MCU Development Board,FPGA/CPLD UNO MEGA2560 DUE 8051 AVR C8051 etc
PLC  RS485 Modbus RTU
9-12V Network equipment/Router
Temperature and humidity sensor
LED Lighting
portable charger
Instruments and meters
5V 6V 9V 12V Relay board
Wireless communication equipment
315M 433M Wireless remote controller
 
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
 
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
how to use:
With a suitable screwdriver, slowly rotating adjustable resistance
 
 
 

Below item is powered by Canton-Power Ltd.
 
Product Name:  5PCS 2.6-6V TO 3-15V DC DC Boost Adjustable Converter for LED driver 18650 Lithium battery portable charger
  
Packing list:
 
5 PCS DD06AJSB 2.7V-6V TO 3-15V adjustable Step-up Boost Module
  
Description:
   
Input voltage 2.7~6V,output 3~15V adjustable
Maximum input current :  1.4A
Long-term work Current : 1.2A
Conversion efficiency :79-90%
   
DC-DC Boost Converter module working frequency 1.0MHZ. 
Operating ambient temperature : -40~ 85 Degrees Celsius
FPGA/CPLD AVR  Development Board friendly.
 
Size 20mm x 10.16mm x 5.6mm(Very small)
Weight : about 1.2g(Very light)
 
Note: Adjustable resistors (potentiometers) are components that are easily damaged. Use a suitable screwdriver to slowly rotate. Click here to buy a screwdriver.
 
 
Start Voltage 2.7V, Output Current 10MA
Input  Voltage

Input  Current

Output  Voltage

Output  Curren
2.8V

0.94A

3V

0.7A
2.8V

1.05A

3.3V

0.7A
3V

0.93A

3.26V

0.7A
2.8V

1A

3.72V

0.63A
3V

1.16A

3.7V

0.77A
3.3V

1A

3.7V

0.74A
2.8V

1A

4.5V

0.52A
3V

1.15A

4.52V

0.62A
3.3V

1.2A

4.5V

0.72A
3.7V

1.2A

4.49V

0.83A
2.8V

1A

5.07V

0.46A
3V

1.13A

5.06V

0.55A
3.3V

1.2A

5.04V

0.66A
3.7V

1.23A

5.02V

0.76A
4.5V

1A

5V

0.79A
 
     
2.8V

1A

6.09V

0.38A
3V

1.12A

6.10V

0.46A
3.3V

1.22A

6.08V

0.54A
3.7V

1.22A

6.06V

0.63A
4.5V

1.2A

6.03V

0.78A
5V

1.3A

6.00V

0.95A
2.8V

0.64A

9.11V

0.17A
3V

0.78A

9.12V

0.22A
3.3V

0.98A

9.14V

0.3A
3.7V

1.20A

9.15V

0.41A
4.5V

1.32A

9.16V

0.56A
5V

1.3A

9.15V

0.63A
6V

1.2A

9.11V

0.71A
3V

0.15A

12.15V

0.03A
3.3V

0.51A

12.18V

0.12A
3.7V

0.87A

12.23V

0.23A
4.5V

1.33A

12.16V

0.42A
5V

1.4A

12.16V

0.5A
6V

1.2A

12.17V

0.53A
 
 
Applications
 
MCU Development Board,FPGA/CPLD UNO MEGA2560 DUE 8051 AVR C8051 etc
PLC  RS485 Modbus RTU
9-12V Network equipment/Router
Temperature and humidity sensor
LED Lighting
portable charger
Instruments and meters
5V 6V 9V 12V Relay board
Wireless communication equipment
315M 433M Wireless remote controller
 
Attention :
  
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
 
Q & A:
 
Q : Why output voltage is less than the nominal voltage
A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
how to use:
With a suitable screwdriver, slowly rotating adjustable resistance
 
 
 

Product Name :      4pcs High Power 5V 12V to 3.3V DC DC Step Down Converter Buck Module for diy Breadboard PCB Universal board Power                              
  
  Packing list:
 
4 PCS 1200mA DC DC Converter Step Down 5V 9V 12V to 3.3V
    
 
  
 
 
Description: 
 
Input voltage 4.75~23V,output 3.3V
 
Maximum output current 1200mA,Short time maximum output current 2000mA
 
DC-DC Step-Down Converter module working frequency 1.4MHz. efficiency is 78-92% .
 
2.54mm pin pitch, Arduiuo Breadboard MCU Development Board friendly
 
Excluding Pin Size 22.5mm x 13.5mm x 6.5mm( small)
 
Weight : about 2.2g( Very light)
 
 
Applications:
 
Breadboard PCB
3.3V LED Lighting
3.3V Motor
esp8266
WIFI Bluetooth Zigbee Module
diy Breadboard PCB Universal board Power
Wireless Module:Nrf24l01 CC1101 CC2500 CC2530 Zigbee 
Smart home / home automation
Distributed Power Systems 
Battery Charger 
Pre-Regulator for Linear Regulators 
DSL Modems
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
   

Product Name :      4pcs High Power 5V 12V to 3.3V DC DC Step Down Converter Buck Module for diy Breadboard PCB Universal board Power                              
  
  Packing list:
 
4 PCS 1200mA DC DC Converter Step Down 5V 9V 12V to 3.3V
    
 
  
 
 
Description: 
 
Input voltage 4.75~23V,output 3.3V
 
Maximum output current 1200mA,Short time maximum output current 2000mA
 
DC-DC Step-Down Converter module working frequency 1.4MHz. efficiency is 78-92% .
 
2.54mm pin pitch, Arduiuo Breadboard MCU Development Board friendly
 
Excluding Pin Size 22.5mm x 13.5mm x 6.5mm( small)
 
Weight : about 2.2g( Very light)
 
 
Applications:
 
Breadboard PCB
3.3V LED Lighting
3.3V Motor
esp8266
WIFI Bluetooth Zigbee Module
diy Breadboard PCB Universal board Power
Wireless Module:Nrf24l01 CC1101 CC2500 CC2530 Zigbee 
Smart home / home automation
Distributed Power Systems 
Battery Charger 
Pre-Regulator for Linear Regulators 
DSL Modems
 
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
   

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 1 Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 1 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB419;
Power supply : 12V 23A battery (not included )
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format:  EV1527  fixed code ; 
Transmit power : 200mW ;
 
 

Below item is powered by Canton-electronics Ltd .
 
Qty :  1 pcs 1 Button Fixed code remote ;
 
 
 
Features / Specifications :
1. 1 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;
 
Technical Data :
Transmitter Module No.: TB419;
Power supply : 12V 23A battery (not included )
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format:  EV1527  fixed code ; 
Transmit power : 200mW ;
 
 

Product Name: 5x 8ch Analog Logic acquisition Multiplexer Demultiplexer Selection switch Module 74HC4051 Board for Arduino Raspberry Pi Breadboard
   
Packing list:
   
5 PCS  HC4051A8 74HC4051 8-channel analog multiplexer/demultiplexer
  
 
 
   
 
Description:
        
General description:
  
The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Features and benefits:
  
Wide analog input voltage range from -5 V to 5 V
Complies with JEDEC standard no. 7A
Low ON resistance:
– 80 Ω (typical) at VCC - VEE = 4.5 V
– 70 Ω (typical) at VCC - VEE = 6.0 V
– 60 Ω (typical) at VCC - VEE = 9.0 V
Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
Typical 'break before make' built-in
 ESD protection:
– HBM JESD22-A114F exceeds 2000 V
– MM JESD22-A115-A exceeds 200 V
– CDM JESD22-C101E exceeds 1000 V
Multiple package options
Specified from -40 °C to 85 °C and -40 °C to 125 °C
Size : 27.94mm x 17.78mm x 3.3mm(Suitable for breadboard)
Weight : 1.8g
For more information, please contact me.   
  
   
Applications:
     
for Breadboard
for Arduino UNO MEGA2560
for MCU ARM AVR ADC
for Raspberry Pi
for PLC RS485 Modbus
for Analog acquisition
Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating
TTL Logic acquisition 
 

Product Name: 5x 8ch Analog Logic acquisition Multiplexer Demultiplexer Selection switch Module 74HC4051 Board for Arduino Raspberry Pi Breadboard
   
Packing list:
   
5 PCS  HC4051A8 74HC4051 8-channel analog multiplexer/demultiplexer
  
 
 
   
 
Description:
        
General description:
  
The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Features and benefits:
  
Wide analog input voltage range from -5 V to 5 V
Complies with JEDEC standard no. 7A
Low ON resistance:
– 80 Ω (typical) at VCC - VEE = 4.5 V
– 70 Ω (typical) at VCC - VEE = 6.0 V
– 60 Ω (typical) at VCC - VEE = 9.0 V
Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals
Typical 'break before make' built-in
 ESD protection:
– HBM JESD22-A114F exceeds 2000 V
– MM JESD22-A115-A exceeds 200 V
– CDM JESD22-C101E exceeds 1000 V
Multiple package options
Specified from -40 °C to 85 °C and -40 °C to 125 °C
Size : 27.94mm x 17.78mm x 3.3mm(Suitable for breadboard)
Weight : 1.8g
For more information, please contact me.   
  
   
Applications:
     
for Breadboard
for Arduino UNO MEGA2560
for MCU ARM AVR ADC
for Raspberry Pi
for PLC RS485 Modbus
for Analog acquisition
Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating
TTL Logic acquisition 
 

Product Name :    1A HV High-Voltage DC-DC Converter DC 10-80V to 6V Buck Step-Down Module Board
    
  Packing list:
 
1 PCS   High-Voltage  10-80V to 6V DC-DC Converter Buck Module
    
 
Description: 
    
Input voltage 10~80V,output 6V
 
Maximum output current 1A
 
DC-DC high-voltage Step-Down Converter module working frequency 150KHz.
Maximum conversion efficiency is 85% .
 
Quiescent current: about 2.5mA
 
Operating Temperature : –40°C to 85°C
 
Size : 59 x 30 x 16mm
 
Weight : 19g;
 
Features :
 
1 Input reverse polarity protection
2 TVS overvoltage protection
3 high frequency filter capacitor
4 high Q value 100UH inductance
5 Output overcurrent protection
6 Over temperature protection
7 Output short circuit protection
  
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
  
Applications:
  
Electric bicycle motorcycle
Ebike Controller Power Supply
DC 80V 72V 64V 60V 48V 36V 24V 
CCTV camera
replace LM2596HV
RS485 Modbus equipment
Motor ​Toy Wifi Router
Telecom / Networking Equipment
Multimeter instrumentation
Electric toys
Smart home / home automation
Battery powered equipment
 
 
 

Product Name :    1A HV High-Voltage DC-DC Converter DC 10-80V to 6V Buck Step-Down Module Board
    
  Packing list:
 
1 PCS   High-Voltage  10-80V to 6V DC-DC Converter Buck Module
    
 
Description: 
    
Input voltage 10~80V,output 6V
 
Maximum output current 1A
 
DC-DC high-voltage Step-Down Converter module working frequency 150KHz.
Maximum conversion efficiency is 85% .
 
Quiescent current: about 2.5mA
 
Operating Temperature : –40°C to 85°C
 
Size : 59 x 30 x 16mm
 
Weight : 19g;
 
Features :
 
1 Input reverse polarity protection
2 TVS overvoltage protection
3 high frequency filter capacitor
4 high Q value 100UH inductance
5 Output overcurrent protection
6 Over temperature protection
7 Output short circuit protection
  
Attention :
 
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
  
  
Applications:
  
Electric bicycle motorcycle
Ebike Controller Power Supply
DC 80V 72V 64V 60V 48V 36V 24V 
CCTV camera
replace LM2596HV
RS485 Modbus equipment
Motor ​Toy Wifi Router
Telecom / Networking Equipment
Multimeter instrumentation
Electric toys
Smart home / home automation
Battery powered equipment
 
 
 

 
 
 
 
Packing list : 1 pcs 433M 1527/2262 Superheterodyne  Receiver decoder module;
Demo :
 
Can directly insert Arduiuo UNO/MEGA2560(also can use other MCU:ARM FPGA/CPLD PIC AVR Etc.)  
 
Model No.

CE006
Operating voltage

3.3V-5.5V
 Working priceple

 Super Heterodyne receiver with decoder , learning type . decoding PT2262, PT2260, PT2240, EV1527 and other learning codeto chip or compatible chips, can learn and store 30 pcs different coded remote control.Intelligently distinguish shock resistance between fixed code and learning code , such as PT2262 and EV1527.
Static current

≤6 mA (DC 5V)
Operating frequency

433MHz
modulation Mode

ASK/OOK
Receiving sensitivity

 -110 dBm (50 Ω)
Speed

< 2.4 K bps
Operating temp.

-30 °C ~ 85 °C
Max rate 2.4 KHZ
Antenns length

18 cm (433.92 MHz)
Dimension

28*12.5*5mm
Output mode

TTL level , Momentary, Latch, Toggle ,user can set it  by welding, Momentary is defult.
IO Drive
Sink Current (Low level drive) 15mA,source current(High level drive) 12mA
 
Work mode (programmable )
singnal Inter-locking (Latch)
singnal Self-locking (Toggle  )
singnal Non-locking (Momentary   is defult )
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
  
User guide :
1: Learing ID : Press learning button(Key button) 2 seconds, LED is flashes once and beginning to learn ;after learning success , LED will flash for a while .
2: Delete ID : Keep pressing learning button for 8 seconds , LED will be on and enter deleting . LED off means finishing deleting;
3: Antenna with a soft wire or other hard metals (such as whip antenna), try to straighten. Do not go near metal objects;
4: Power supply voltage requires stable and low ripple factor, multi-level filtering (such as adding beads, inductors, capacitors, etc.);
 
 

 
 
 
 
Packing list : 1 pcs 433M 1527/2262 Superheterodyne  Receiver decoder module;
Demo :
 
Can directly insert Arduiuo UNO/MEGA2560(also can use other MCU:ARM FPGA/CPLD PIC AVR Etc.)  
 
Model No.

CE006
Operating voltage

3.3V-5.5V
 Working priceple

 Super Heterodyne receiver with decoder , learning type . decoding PT2262, PT2260, PT2240, EV1527 and other learning codeto chip or compatible chips, can learn and store 30 pcs different coded remote control.Intelligently distinguish shock resistance between fixed code and learning code , such as PT2262 and EV1527.
Static current

≤6 mA (DC 5V)
Operating frequency

433MHz
modulation Mode

ASK/OOK
Receiving sensitivity

 -110 dBm (50 Ω)
Speed

< 2.4 K bps
Operating temp.

-30 °C ~ 85 °C
Max rate 2.4 KHZ
Antenns length

18 cm (433.92 MHz)
Dimension

28*12.5*5mm
Output mode

TTL level , Momentary, Latch, Toggle ,user can set it  by welding, Momentary is defult.
IO Drive
Sink Current (Low level drive) 15mA,source current(High level drive) 12mA
 
Work mode (programmable )
singnal Inter-locking (Latch)
singnal Self-locking (Toggle  )
singnal Non-locking (Momentary   is defult )
 
Work mode explanation:
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;
 
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
  
Latched------------------
Press transmitter button A, the receiver relay A is ON, the relay B/C/D is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A/C/D is OFF.
Press transmitter button C, the receiver relay C is ON, the relay A/B/D is OFF
Press transmitter button D, the receiver relay D is ON, the relay A/B/C is OFF.
  
User guide :
1: Learing ID : Press learning button(Key button) 2 seconds, LED is flashes once and beginning to learn ;after learning success , LED will flash for a while .
2: Delete ID : Keep pressing learning button for 8 seconds , LED will be on and enter deleting . LED off means finishing deleting;
3: Antenna with a soft wire or other hard metals (such as whip antenna), try to straighten. Do not go near metal objects;
4: Power supply voltage requires stable and low ripple factor, multi-level filtering (such as adding beads, inductors, capacitors, etc.);