Elektronikus összetevők

10pcs B0505S-1W 5V to 5V converter DC DC power module converter 1000VDC Isolation

multi-channel transceiver @ 868MHz
support FSK, GFSK, ASK / OOK and MSK
configurable data rate: 1.2k to 500kps
independent 64-byte RX and TX data FIFOs
support radio wake
supports automatic clear channel assessment
efficient SPI Interface
low power supply (1.8V-3.6 V)

Product parameters:
Size: 33.4 * 25.6MM
Voltage: 3.3V, 5V
Port: the digital quantity level
The output load voltage: 0 to 24V
The output load current:< 5A (more than 1A need to add heat sink)
Platform: the Arduino, MCU, ARM, raspberry pie
The product features:
Using original IRF520 power MOS tube, can adjustPWM output
Can let the Arduino drive up to 24 v load, such as LED lights belt, dc motor, micro pump, solenoid valve
By PWM adjustable can realize stepless dimming LED, motor stepless speed regulation
The product instructions:
PWM signal for high level effectively
When the PWM for high level (3.3 V to 3.3 V) :
As the power supply voltage, between V and V - working indicator, work load
When the PWM is low level(0 V to 0.5 V):
V and V - between 0, work lights out, don't work load

Specifications:
Working voltage: 5V/12V/24V
Size: 53*31mm
Color: blue
Material: electric components
Features:
--  Use: Adopts photoresistor induction light intensity, built-in relay, direct control of the load
-- Potentiometer sensitivity adjustment: With a potentiometer sensitivity adjustment, by adjusting the potentiometer, set the start relay valve value, when the light on the threshold, relay module pull-in, dark at the threshold, the relay release, so pick up normally open with the public is the control of the switch during the day, pick up normally closed with the public is to control the switch in the evening.
-- Easy to install: Equipped with four M3 fixed bolt hole, convenient installation
-- Application: Can do all kinds of luminance detection switch, can control all kinds of lamps, automatically open in the evening, automatically go out during the day and the car supplies control and automation equipment  and more.
Notes:
1. Please allowed 1-3mm differences due to manual measurement, thank you for your understanding!
2. Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.

Model: sct013
Frequency: 50 hz-150 kHz
Sct-013 rated input current: 100A model: sct-013 rated input current: 60A / 100A
characteristic:
Opening size:
13mm × 13mm, fully compatible with foreign similar products; nonlinearity ± 3% (10% ~ 120% of rated input current); lead length 1.5m, standard Φ 3.5 three core plug output; current and voltage output forms (voltage output form, built-in sampling resistance).
Application:
It is used for current measurement, monitoring and protection of AC motor, lighting equipment, air compressor, etc. Iron core material: ferrite, mechanical strength: opening and closing times not less than 1000 times (tested at 20 ℃)
Safety index: electrical strength (between shell and output) 6000V AC / 1min, flame retardant characteristics meet ul94-v0
Working temperature: - 25 ℃～ 70 ℃

5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse For Arduino

1 , on-board MAX485 chip , is a tool for RS-485 communications , low-power , Slew-Rate Transceiver
2 , onboard then 5.08 (mm) pitch 2P terminal for easy wiring RS-485 communication
3 , the chip has drawn all of the pins can be controlled by the microcontroller operation
4, Working voltage : 5V
5 , board size : 44 (mm) x14 (mm)

TP5100 is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit, making TP5100 ideal for portable equipment so large current charging management applications.Meanwhile, TP5100 built-in input overcurrent, undervoltage protection, over temperature protection, short circuit protection, battery temperature monitoring, reverse battery protection.
TP5100 have 5V-18V wide input voltage, dual battery trickle charge into pre-charge, constant current, constant voltage three phase, pre-charge current trickle charge current through an external resistor adjustment, the maximum charge current up to 2A. TP5100 with a frequency of 400kHz switching mode makes it possible to use a smaller outer Suo device and the large current charging still maintain a smaller amount of heat.
TP51OO built-in power PMOSFET, anti-intrusion circuit, so no anti-intrusion protection and other external Schottky diode.
Features:
- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100% .
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, undervoltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
Maximum Ratings:
- Static input supply voltage (VlN): 20V
- BAI: -8.4V-20V
- BAT Short-Circuit Duration: Continuous
- Operating environment Temperature range: -40 ° -85 °
- Storage temperature range: -65 ° - 125 °
Application:
- Portable equipment, various chargers
- Smartphone, PDA, mobile cellular telephone
- MP4, MP5 players, tablets
- HM
- Power Tools
- Walkie-talkie
Default shipping settings: 4.2V 2A. The board has with LED, and LED's external reserve position.
Size: 25 * 17 * 5mm ultra-small size
Input voltage: 5-18V DC power supply
Charge status: full and unloaded blue lights, charging red.

echnical parameters:
Operating Voltage Range: DC4.5-20V
Static current: <60uA
Output level: High 3.3V / Low 0V
Trigger: repeatable trigger (default)
Delay time: Default 8S -30% (can be customized range of a few tenths - tens of minutes)
PCB Dimensions: 10 * 23mm
Induction angle: <100 degree cone angle
Induction distance: 3 meters
Working temperature: -20 - 80 degrees
Sensor Lens Dimensions: Diameter: 10mm (default)
Features:
Automatic induction: to enter the sensing range of the output is high, people leave the sensor range automatically delay off high, output low. Ultra-small size.
Repeatable trigger: the sensor output high, the delay period, if there is human activity in its sensing range, the output will remain high until people leave after the high variable delay lOW (automatically extended sensor module detects the human body after every activity a delay period, and the last time an event is the starting point of the delay time).
Wide operating voltage range: the default operating voltage DC4.5V-20V.
Micropower: quiescent current <50 microamps, especially for battery-powered automatic control products.
Output high signal: easy docking and all kinds of circuits.
Applications:
Body induction lamps
Body sensors toys
Security Products
Industrial automation and control
Auto-sensing of electrical equipment
Battery-powered automatic control

Specification:
Model: HX-3S-01
Overcharge voltage range: 4.25-4.35v ± 0.05v
Overpressure voltage range: 2.3-3.0v ± 0.05v
Quiescent current: <6uA
Internal resistance: <60m
Size: 50 * 16 * 1.0mm
Maximum operating current: 5-8A Operating temperature: -40 --- 50 °
Maximum instantaneous current: 9-10A Storage conditions: -40-- 80 °
Quiescent current: less than 6uA Effective life: more than 30,000 hours
Internal resistance: less than 60mΩ Short circuit protection: protection, delay self-recovery.
The protection board size and device description;
The protection board size is 50 * 16 * 1.0mm; components for the Seiko S-8254AA protection chip and genuine FDS 4435A * 4

New Product Introduction:
1: The new United States imported chips, definitely not homemade chips, disassemble chip.
2: The maximum output current 3A, long-running 2.1A, sufficient margin.
3: The new design, circuit design does not require electrolytic capacitors and tantalum capacitors (electrolytic capacitor life is short, tantalum risk of explosion). Now with the use of high-end large-size solid ceramic capacitor circuit (MCC) 2 Ke.
4: The new program uses synchronous rectification circuit conversion efficiency is very high, in turn 5V 0.7A 6.5V when efficiency up to 97.5% , 12V turn 5V 1A, they also reached 94% , unlike some peers efficiency is only 60-70% . (Efficiency test removed the input reverse polarity protection diode and fuse drop).
5: Big shielded inductor current, low resistance, to maximize conversion efficiency. Reduce heat.
6: Ultra-small size, 20 (L) * 11 (W) * 5 (H) mm, the whole network to a minimum.
7: Ultra-low quiescent current, quiescent current of 0.85 mA. Connected to the car battery without adding switches can be connected to the cigarette lighter line or the ACC power cable line.
8: Output Integrated adjustable and fixed voltage, fixed output does not need customization, direct can be very voltage, potentiometer can adjust, versatility is very strong on the board under the spot welding
9: Integration enabled port, default mode of operation, low close, bring convenience to control

1. This module adopts high-performance imported chip, and its performance is better than the general module.
2. Input any DC voltage from 0.9V to 5V, and output 5V DC voltage stably. A single AA battery can output up to 200 ~ 300mA current, and two AA batteries can output 500 ~ 600mA current. It can supply power for your mobile phone, camera, MCU and digital products
3. Industrial grade temperature range: - 40 ℃ - 85 ℃
4. High conversion efficiency, up to 96%
5. With USB motherboard, it is widely used
6. Ultra small volume (PCB board 25 mm * 18 mm) for installation in various small equipment
7. With work indicator

DESCRIPTION:
Support CAN V2.0 B  , Communication rate up to 1Mb/S
Power supply: DC 5V , SPI Protocol Control
Work current: 5mA ,
Size: 4*2.8 cm ,   standby current: 1uA
Working temperature: -40 C -   85 C
120 Ohm terminal resistance, Impedance matching and guarantee the ability to drive

- DS1302 main performance index
In The real time clock has The ability of calculating The prior to The 2100 second, minute, hour, day, week, month, year, and The ability to adjust a leap year
- Wide working voltage: 2.0 ~ 5.5 V
- When The working voltage is 2.0 V, The current is less than 300 na
- Read/write clock or RAM data have two transmission way: Single - byte/many bytes group
8 feet - 8 feet DIP the assembly or optional SOIC encapsulation "according to the surface of the assembly

20pcs B0505S-1W 5V to 5V converter DC DC power module converter 1000VDC Isolation

Highlights:
Two independent PWM generators can set the frequency, duty cycle;
The wide frequency range, high accuracy;
Can serial communication.
First, the module description:
Frequency is divided into three ranges:
XXX (no decimal point): the smallest unit is 1Hz, the range 1Hz ~ 999Hz;
XX.X (decimal point in ten): The minimum unit is 0.1Khz; the range of 0.1KHz ~ 99.9KHz
X.X.X. (there are three decimal point): the smallest unit is 1Khz; the range 1KHz ~ 150KHz
Frequency display example:
"100" indicates that the PWM output pulse of 100Hz;
"54.1" indicates that the PWM output pulse of 54.1KHz;
"1.2.4." Indicates that the PWM pulse output 124KHz
Duty Cycle in the range: 0 to 100;
Three frequencies duty cycle is the same, all the parameters non-volatile.
Second, the module parameters:
Working voltage: 5--30V, support micro USB 5.0V power supply;
Frequency range: 1Hz ~ 150KHz;
The frequency accuracy: ± 2% ;
Output Current: <30mA;
Output amplitude: Default 5Vp-p (settable);
Operating temperature range: -30 ~ 70 °.
Third, the parameter settings:
Module has three buttons [Set], [Up], [Down];
Press [Set] key to switch the display four parameters (FR1: PWM1 frequency; dU1: PWM1 duty cycle; FR2: frequency of PWM2; dU2: PWM2 duty cycle), before the handover parameters, there will be corresponding parameter name flash.
Press [Up], [Down] keys to modify the current parameter value (long press can quickly add or subtract fast).
Two PWM each have three preset frequency, the frequency display interface, long press [SET] key to switch between three types of frequencies, three kinds of frequency duty cycle is the same value. (XXX: range 1Hz ~ 999Hz; XX.X: range 0.1Khz ~ 99.9Khz; X.X.X .: range 1Khz ~ 150Khz,).
Fourth, the scope:
As square wave signal generator which generates a square wave signal;
to provide a signal to the stepping motor driver;
Adjustable pulse generation for chip use;
produce variable pulse signal, the control-related circuit (PWM dimming, speed).
Fifth, the serial control
Baud rate: 9600 bps
Data bits: 8
Stop bits: 1
Parity bit: none
Flow control: none
1, set the PWM frequency
"S1FXXXT": setting PWM1 frequency of XXX HZ (001 ~ 999)
"S1FXX.XT": set the frequency of PWM1 XX.X KHZ (00.1 ~ 99.9)
"S1F: X.X.X.T": setting PWM1 frequency of XXX KHZ (0.0.1 ~ 1.5.0..)
'S1': PWM1
'S2': PWM2
'F': Frequency
'D': Duty Cycle
'T' is the end flag
Set the PWM duty cycle
"S1DXXXT": setting PWM1 duty cycle XXX; (001 ~ 100)
"S2DXXXT": set PWM2 duty cycle XXX; (001 ~ 100)
Setting successful return: DOWN;

Pack:
DS1307 I2C real-time clock chip (RTC)
24C32 32K I2C EEPROM memory
Solve the problem DS1307 with backup battery can not read and write.
Fully charged, it can provide the DS1307 timing 1.
Compact design, 27mm * 28mm * 8.4mm
Leads to the a DS1307 clock pin, to provide the clock signal for the microcontroller.
Can be cascaded to other I2C devices.

5A PWM:
Operating voltage: DC4.5V-35V
Output current: 0-5A
Output power: 90W (max)
Quiescent current: 7uA (standby)
PWM duty cycle: 1% -100%
PWM frequency: 20khz Size: 30mm x 26mm x 14mm (Without Handle)
Precautions: DC motor governor input is DC, can not directly connected to the AC (for example: home 220V AC), otherwise it will burn! DC power supply positive and negative terminals do not reverse, otherwise the governor may be damaged.
The motor can be positive or negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
Adjust the potentiometer knob to change the governor output duty cycle, the motor speed changes.

Bt201 Dual Mode 5.0 Bluetooth Lossless Audio Power Amplifier Board Module Tf Card U Disk Ble Spp Serial Port Transparent Trans Function introduction: 1. Support Bluetooth audio, BLE data transmission, U disk playback, TF card playback. Support MP3/WAV/FLAC/APE format decoding 2. Optional: Serial AT command control. Support to modify the baud rate. Modify Bluetooth name, specify device playback, and mobile data passthrough 3. Support BLE and SPP dual-mode data transparent transmission, colleagues can also broadcast Bluetooth audio, no conflict 4. Support Bluetooth call, multi-button control. The last song, the next song. play / Pause. Adjust the volume and other simple functions. 5. Support to get the full file name of the play. Serial port specified path to play, loop or single play 6. Support 128KBS recording function, TF card or U disk. Recording delete playback, etc. 7. Rich usage information, reference PCB, use video tutorial, mobile phone transparent video tutorial. Serial AT video tutorial 8. Easily dock existing apps, or develop WeChat applets to implement mobile phone control Color: green

 

 
 
Description:
 
 
100% brand new and high quality.
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with dual-mode Wi-Fi and Bluetooth chips, which is safe, reliable, and scalable to a variety of applications. 
 
 
Features: 
 
High performance-price ratio
Small volume, easily embeded to other products
DC 5V-12V 
1 analog input(3.2V max input)
A Micro USB connection
Compatible with for Arduino
D1 R32=WiFi Bluetooth UNO
 
Size: 6.8x5.3cm/2.68x2.09inch
 

Highlights:
Two independent PWM generators can set the frequency, duty cycle;
The wide frequency range, high accuracy;
Can serial communication.
First, the module description:
Frequency is divided into three ranges:
XXX (no decimal point): the smallest unit is 1Hz, the range 1Hz ~ 999Hz;
XX.X (decimal point in ten): The minimum unit is 0.1Khz; the range of 0.1KHz ~ 99.9KHz
X.X.X. (there are three decimal point): the smallest unit is 1Khz; the range 1KHz ~ 150KHz
Frequency display example:
"100" indicates that the PWM output pulse of 100Hz;
"54.1" indicates that the PWM output pulse of 54.1KHz;
"1.2.4." Indicates that the PWM pulse output 124KHz
Duty Cycle in the range: 0 to 100;
Three frequencies duty cycle is the same, all the parameters non-volatile.
Second, the module parameters:
Working voltage: 5--30V, support micro USB 5.0V power supply;
Frequency range: 1Hz ~ 150KHz;
The frequency accuracy: ± 2% ;
Output Current: <30mA;
Output amplitude: Default 5Vp-p (settable);
Operating temperature range: -30 ~ 70 °.
Third, the parameter settings:
Module has three buttons [Set], [Up], [Down];
Press [Set] key to switch the display four parameters (FR1: PWM1 frequency; dU1: PWM1 duty cycle; FR2: frequency of PWM2; dU2: PWM2 duty cycle), before the handover parameters, there will be corresponding parameter name flash.
Press [Up], [Down] keys to modify the current parameter value (long press can quickly add or subtract fast).
Two PWM each have three preset frequency, the frequency display interface, long press [SET] key to switch between three types of frequencies, three kinds of frequency duty cycle is the same value. (XXX: range 1Hz ~ 999Hz; XX.X: range 0.1Khz ~ 99.9Khz; X.X.X .: range 1Khz ~ 150Khz,).
Fourth, the scope:
As square wave signal generator which generates a square wave signal;
to provide a signal to the stepping motor driver;
Adjustable pulse generation for chip use;
produce variable pulse signal, the control-related circuit (PWM dimming, speed).
Fifth, the serial control
Baud rate: 9600 bps
Data bits: 8
Stop bits: 1
Parity bit: none
Flow control: none
1, set the PWM frequency
"S1FXXXT": setting PWM1 frequency of XXX HZ (001 ~ 999)
"S1FXX.XT": set the frequency of PWM1 XX.X KHZ (00.1 ~ 99.9)
"S1F: X.X.X.T": setting PWM1 frequency of XXX KHZ (0.0.1 ~ 1.5.0..)
'S1': PWM1
'S2': PWM2
'F': Frequency
'D': Duty Cycle
'T' is the end flag
Set the PWM duty cycle
"S1DXXXT": setting PWM1 duty cycle XXX; (001 ~ 100)
"S2DXXXT": set PWM2 duty cycle XXX; (001 ~ 100)
Setting successful return: DOWN;

Glass　Length

14mm
Glass　Diameter

2mm
Total　Length

45mm
Contact Form

A
Max. Switching Voltage

300 VDC
Min. Breakdown Voltage

150 VDC
Max. Contact Rating

10W
Max. Switching Current

0.55 A
Max. Operate time

0.45 ms
Bounce time

0.25 ms
Max. Release time

0.35 ms
Resonant Frequency

5000 HZ
Max. Operating Frequency

400 HZ
Pull in Value

20-70 AT
Min. Drop out Value

4 AT
Max. Contact Capacitance

0.5 pF
Electrical Life

50mV-10μA-1x106

Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse). Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. Features: Power supply voltage: VM=15V max, VCC=2.7-5.5V Output current: Iout=1.2A(average) / 3.2A (peak) Standby control to save power CW/CCW/short brake/stop motor control modes Built-in thermal shutdown circuit and low voltage detecting circuit All pins of the TB6612FNG broken out to 0.1" spaced pins Filtering capacitors on both supply lines Dimensions: 0.8x0.8"

MC-38 1pair Wired Door Window Sensor 330mm Wire Lengthen Randomly Magnetic Switch Home Alarm System N.C Type

 
 
 
 

 
The module is a 12-pin display module with a 4-point common digital tube (0.36 inch) with a clock point. The driver chip is TM1637. It only needs 2 signal lines to enable the MCU to control the 4-bit 8- Segment digital tube.
The module features are as follows:
Display device is 4-digit yang red digital tube
Digital tube 8-level grayscale adjustable
Control interface level can be 5V or 3.3V
4 M2 screw positioning holes for easy installation
Project

Minimum value

Typical value

Maximum

Unit
Voltage

3.3

5

5.5

VDC
Current (@5V)

-

30

80

mA
Size

42X24X12

Mm
Weight

8

g
Control interfaceA total of 4 pins (GND, VCC, DIO, CLK), GND is ground, VCC is the power supply, DIO is the data input and output pin, CLK is the clock signal pin;
Digital Tube: 4-digit common anode with a 0.36-inch digital tube with a score point, highlighted in red;
Positioning hole: 4 M2 screw positioning holes, the hole diameter is 2.2mm, which makes the module easy to install and position, and realize the module combination;
Overview of the library routines:
1. ClockDisplay: Use the timer 1 of the MCU on the motherboard to time and let the 4-digit display display.
2. NumberFlow: 0~9, A, b, C, d, E, F and other 16 characters flow from right to left.
3. StopWatch: Use the timer 1 of the MCU on the motherboard to time, and use the button to realize the stopwatch function.
 
Experiment equipment:
An Ard uino compatible motherboard Cat duino (not familiar with open source hardware can be understood as the Atmega328P microcontroller development board) and a mini USB cable;
1 4-digit digital tube display module;
4 male to female DuPont lines for connecting the control interface of the module and the Cat duino development board;
Experimental procedure:
1. Use 4 male to female DuPont lines 4-digit digital display module Connected to Cat duino, as shown in the following table and figure
Cat duino

Cable

4-digit digital display module
GND

black line

GND
5V

Red line

VCC
D2

Yellow line

DIO
D3

White line

CLK
 
2. Connect the Catduino with mini USB. If you are using the motherboard for the first time, its USB to serial driver can find the USB Drivers from the drivers in the Ard uino IDE directory.
3. Reopen the Ard uino IDE and click the Open button on the toolbar to open the NumberFlow routine in DigitalTube.
Select the serial port, board name, click the Burn button, you can burn. This routine can make 16 characters from 0~9, A, b, C, d, E, F, etc. flow from right to left.
The function of adjusting the gray scale of the digital tube is the set() function in the class TM1637, and the input parameter is 0~7. The larger the number, the higher the brightness.

T-Call V1.3规格：
Hardware Specifications

Chipset

ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
FLASH

QSPI flash 4MB / PSRAM 8MB
SRAM

520 kB SRAM
Button

Reset
USB to TTL

CP2104
Modular interface

UART、SPI、SDIO、I2C、LED PWM、TV PWM、I2S、IRGPIO、capacitor touch sensor、ADC、DACLNA pre-amplifier
On-board clock

40MHz crystal oscillator
Working voltage

2.7V-3.6V
Working current

About 70mA
Sleep current

About 300uA
SIM card

Only supports Nano SIM card
Working temperature range

-40℃ ~ 85℃
Size&Weight

78.83mm*28.92mm*8.06mm(11.77g)
Power Supply Specifications

Power Supply

USB 5V/1A
Charging current

500mA
Battery

3.7V lithium battery
JST Connector

2Pin 1.25mm
USB

Type-C
Wi-Fi

Description
Standard

FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC
Protocol

802.11 b/g/n(802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4μS Protection interval
Frequency range

2.4GHz~2.5GHz(2400M~2483.5M)
Transmit Power

22dBm
Communication distance

300m
Bluetooth

Description
Protocol

meet bluetooth v4.2BR/EDR and BLE standard
Radio frequency

with -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH
Audio frequency

CVSD&SBC audio frequency
Software specification

Description
Wi-Fi Mode

Station/SoftAP/SoftAP Station/P2P
Security mechanism

WPA/WPA2/WPA2-Enterprise/WPS
Encryption Type

AES/RSA/ECC/SHA
Firmware upgrade

UART download/OTA（Through network/host to download and write firmware）
Software Development

Support cloud server development /SDK for user firmware development
Networking protocol

IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT
User Configuration

AT Instruction set, cloud server, android/iOSapp
OS

FreeRTOS

Features:
This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0% -100% .
With a self-recovery fuse 2A and a Power-On LED light.
Enable to provide a continuous current of 2A to your DC motor or other DC load.
Specifications:
Input supply voltage:1.8V-15VDC
The max output power:30W
The max continuous output current :2A
Duty Cycle adjustable: 0% -100%
Size: approx. 32*32*15mm/1.25*1.25*0.59''
Net weight: approx. 14g
Note:DC motor speed regulator DC power supply, do not be directly connected to household 220V AC.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding

1. Working voltage: DC5V to 20V
2. static power consumption: 65
3. output level: high 3.3V, low 0V
4. delay time: adjustable (0.3 sec ~18 sec)
5. the embargo time: 0.2 seconds
6. trigger mode: l not repeatable, h can be repeated, the default value for h
7. induction range: less than 120 degree cone angle, up to 7 meters
8. working temperature:- -15~ 70
9.PCB dimensions: 32*24mm, screw hole 28mm, screw diameter 2mm, induction of lens dimensions: (diameter): 23mm (default)
Features:
1. automatic: when someone enters the sensing range is input high level, people leaving the induction range is automatically delayed closing high level.Output low level.
2. light control (optional): module to set aside a location, you can set the photo control, or strong light during the day without induction.Light control is an optional feature, factory photoresistance is not installed.If you want, please purchase the photoresistance installed.
3. two trigger modes: l not repeatable, h can be repeated.Jumper option defaults to h.
A. not repeatable trigger mode: after the sensor output high level, delay time is over, the output will automatically change from high to low level.
B. can repeat triggered way: that induction output high level Hou, in delay time paragraph within, if has human in its induction range within activities, its output will has been maintained high level, until people left Hou only delay will high level becomes low level (induction module detection to human of each times activities Hou will automatically extended a delay time paragraph, and to finally once activities of time for delay time of starting points).
4. induction blackout time (default setting: 0.2 sec): after each induction the induction module output (high level low level), you can immediately set a blackout time, during this time the sensor does not receive any sensor signal.This feature can be achieved (sensor output and blockade times) the interval between work, can be applied to interval detection products; at the same time this function can inhibit various disturbances load in the process of switching.
5. wide operating voltage range: default voltage DC5V to 20V
6. power consumption: quiescent current 65, particularly suitable for battery-powered appliances.

Input power supply: 7v-30v, below 24V is recommended
Output voltage: 5V
Output current: 5A Max.
Steering gear power drive, can directly connect the steering gear, break off can be used as power module

1pcs Basic Breakout Board For FTDI FT232RL USB To TTL Serial IC Adapter Converter Module For Arduino 3.3V 5V FT232 Switch

1set 10pcs Alligator Clips Electrical DIY Test Leads Alligator Double-ended Crocodile Clips Roach Clip Test Jumper Wire