Famegmunkáló kellékek

Accessories Flexible Shaft Bit Holder Right Angle Universal Attachment
Details:
*100% brand new and high quality
*Color: As Pictures Show
*Material: Carbon steel
*Easy, lightweight and fast, connect standard hex screwdriver
*It's good for the Wrench, can be connected to drill, rechargeable drill or manual wrench
*Brilliant Design and Well-Constructed: Right Angle Attachment is a Standard 1/4" one. Helps you Out from Occasions When You Need the Power but Stuck at Full Angles
*Extension Bit is Universal in any Directions, Allows You Get into Those Difficult Places and Get the Job Done Easier and Quicker
*Not Designed for Heavy Force Drills: These Tools are Work Great for Light Drilling, Slow Speed/Screw Driving, Like Cordless Drill, Ratchet Hand Screwdriver etc, Not Compatible with Drivers Which are High Speed and Heavy Force Drills, though They are Tough for Good Torque Spin
Package Contents:
1*Bit Holder
1*Flexible Shaft
10*Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

6pcs M3-M10 1/4in Hot Composite Tap Thread Spiral Screw Hex HSS Screw Drill-Bit
Item Details:
*100% Brand new and high quality
*6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements;
*No tool changes, good alignment and fast cycle times make this a very productive tool.
*Quick change 1/4¡± (6.35mm) hex shank with metric sizes engraved on the bits. Wide spiral flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
*Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials.
*Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.Note:Low Speed and Cutting holes in materials(Thickness :<3mm)
*Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
*Fast replacement composite cone, uses drill edged principle.
*Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
*Self-centering point, do not need assistant center drilling or center punching.
*High hardness, rustproof, solid and durable
Specification:
*Material: High Speed Steel 4341
*Tapping Material Type: Wood, Plastic, etc.
*Tapping Material Thickness: About 5mm
*Point Type: 135 Degree Split Point
*Shank: 6.35mm (1/4inch) Quick Change Hex
Package Contents:
6*Drill Bits
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

6pcs HSS Countersink Spiral Drill Bit Set Combination Hex Shank Chamfer Durable
Features:
1. High quality and brand new.
2. Suitable for drilling, tapping and cutting on soft metals, aluminum plates, iron, etc.
3. Quickly replace the compound cone, using the principle of drilling edge.
4. Drilling and tapping, one-stop processing, greatly saving processing steps and time costs, and improving work efficiency.
5. Automatic centering, no need for auxiliary center drilling or center punching
6. High hardness, anti-rust, strong and durable.
7. Metric system: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
8. Material: HSS handle: 1/4 inch (6.35mm) hex handle diameter
Specification:
*Material: High speed steel
*hex handle: 6.35mm
*Specifications: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
Package List:
6x hex shank compound tap bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

5x/kit Straight Round Shank Masonry Drill Bits 4-10mm Ceramic Tile Wood Drilling
Features:
*100% brand new and high quality
*Straight round shank.
*Great chip removal ability.
*Drills in different sizes to meet varied drilling needs.
*Made of premium quality material, durable to use.
*Suitable for drilling ceramic tile, brick, block, concrete, metal, plastic and wood
Specifications:
*Shank Material: 45# Steel
*Cutter Head Material: Hard Alloy
*Color: Silver
*Diameter: 4mm 5mm 6mm 8mm 10mm
*Total Length: 75mm 85mm 100mm 120mm 120mm
*Quantity: 5pcs
Package Contents:
5 x Masonry Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Marble Drill Bits YG6X Carbide Hand drill 6-12mm Triangle Shank Set High Quality
Features:
*6-12mm Triangle Shank Tile Drill Bit Set for Glass Porcelain Granite Marble
*Special tool grinding technology, small incision resistance, high hardness, greater drilling efficiency
*Effective to remove chip, smooth and flat without sticking on the tool, smoother drilling
*Fit hand drill, bench drill; tile, glass, plastic, wood drilling
*Triangle shank design, the grip is tighter, does not slip
*It can be used for drilling holes in glass, ceramic tile, cement wall, plastic, iron sheet, etc., and it is non-destructive to tile wall
Specifications:
*Material: YG6X Carbide
*Shank type: Triangle
*Cooling type: External cooling
*Cutting diameter (mm): 6-12
*Shank diameter (mm): 4.5-9
*Chip flute length (mm): 50
*Useful length (mm): 70
*Overall length (mm): 120
*Outer blade apex angle (°): 45
*Material: Hard Alloy
*Maximum cutting depth: 70mm (Approx)
*Blade size: 6-12mm
*Category: Reaming drill
*Blade diameter: 6-12 (mm)
*Blade length: 100-120 (mm)
*Full length: 120 (mm)
*Handle: 10 (mm)
*Size (Approx):
Diameter: 6mm; Total length: 100mm; Working length: 53mm; Shank diameter: 4.5mm
Diameter: 8mm; Total length: 112mm; Working length: 65mm; Shank diameter: 6.0mm
Diameter: 10mm; Total length: 117mm; Working length: 70mm; Shank diameter: 7.5mm
Diameter: 12mm; Total length: 121mm; Working length: 70mm; Shank diameter: 9.0mm
Warm Tips: When using the drill bit, the effect will be better with water, and the service life will be prolonged
Package Contents (optional):
Package Contents 1: 5*Drill Bits(6 6 8 10 12mm)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS Drill Straight Shank Sharp 4-Flute Bit Tool Practical 10pcs Durable
Features:
*100% brand new and high quality.
*Including 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm cutters for various DIY needs.
*The edge of end mill bit is hard and sharp with tiain coating,will reduce changing times and ensure the high efficiency of the work.
*Can apply to carbon steel,alloy steel, die steel,tool steel,cast iron, titanium, aluminum.
*Ideal for side milling, end milling, finish machining. Suitable for the needs of all aspects of the milling.
*Four flute design provides small chip loads and quicker removal
Specification:
*Material: High Speed Steel (HSS)
*Type: Milling Cutter
*Quantity: 10PCS
*Cutter Sizes: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm
Package Contents:
10 x HSS Straight Shank Milling Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Straight Shank Sharp 4-Flute Bit Tool High Quality Practical 10pcs Durable
Features:
*100% brand new and high quality.
*Including 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm cutters for various DIY needs.
*The edge of end mill bit is hard and sharp with tiain coating,will reduce changing times and ensure the high efficiency of the work.
*Can apply to carbon steel,alloy steel, die steel,tool steel,cast iron, titanium, aluminum.
*Ideal for side milling, end milling, finish machining. Suitable for the needs of all aspects of the milling.
*Four flute design provides small chip loads and quicker removal
Specification:
*Material: High Speed Steel (HSS)
*Type: Milling Cutter
*Quantity: 10PCS
*Cutter Sizes: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm
Package Contents:
10 x HSS Straight Shank Milling Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Screwdriver extensions For power drills Steel Black New Practical Useful
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

100 Hole Storage Holder Drill Bit Collet Tool Box Rack Organizer Stand Container
Features:
*100% brand new and high quality.
*This product is designed to store nail drill bits.
*Firm and flat PP base, won't slip easily.
*If you always look for those tiny bits, you definitely need this organizer.
*The storage stand totally include 100 holes, can be used to store many nail drill bits.
*Drill bit storage case can make nail drill bits look tidy and orderly, is safe and convenient to use.
Specifications:
*Material: PP
*Number of Holes: 100
*91 Holes: 1mm-10mm (Difference 0.1mm)
*Other Holes: 10.5mm, 10.8mm, 11.0mm, 11.5mm, 11.8mm, 12.0mm, 12.5mm, 12.8mm, 13.0mm.
*Features: Storage Tool, Easy to Use, Convenient
*Size: 17.5cm x 17.5cm x 8cm/6.89" x 6.89" x 3.15" (Approx.)
Package Contents:
1pcs x Drill Bit Storage Case (Others not Included)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Bits Organizer Storage Box Hard Plastic Rotary Tools Rack 100Holes Holder
Features:
*100% brand new and high quality.
*This product is designed to store nail drill bits.
*Firm and flat PP base, won't slip easily.
*If you always look for those tiny bits, you definitely need this organizer.
*The storage stand totally include 100 holes, can be used to store many nail drill bits.
*Drill bit storage case can make nail drill bits look tidy and orderly, is safe and convenient to use.
Specifications:
*Material: PP
*Number of Holes: 100
*91 Holes: 1mm-10mm (Difference 0.1mm)
*Other Holes: 10.5mm, 10.8mm, 11.0mm, 11.5mm, 11.8mm, 12.0mm, 12.5mm, 12.8mm, 13.0mm.
*Features: Storage Tool, Easy to Use, Convenient
*Size: 17.5cm x 17.5cm x 8cm/6.89" x 6.89" x 3.15" (Approx.)
Package Contents:
1pcs x Drill Bit Storage Case (Others not Included)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS Drill Straight Shank 4-Flute Bit Tool High Quality Practical 10pcs Portable
Features:
*100% brand new and high quality.
*Including 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm cutters for various DIY needs.
*The edge of end mill bit is hard and sharp with tiain coating,will reduce changing times and ensure the high efficiency of the work.
*Can apply to carbon steel,alloy steel, die steel,tool steel,cast iron, titanium, aluminum.
*Ideal for side milling, end milling, finish machining. Suitable for the needs of all aspects of the milling.
*Four flute design provides small chip loads and quicker removal
Specification:
*Material: High Speed Steel (HSS)
*Type: Milling Cutter
*Quantity: 10PCS
*Cutter Sizes: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm
Package Contents:
10 x HSS Straight Shank Milling Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS Drill Straight Shank 4-Flute Bit Set High Quality Practical Durable
Features:
*100% brand new and high quality.
*Including 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm cutters for various DIY needs.
*The edge of end mill bit is hard and sharp with tiain coating,will reduce changing times and ensure the high efficiency of the work.
*Can apply to carbon steel,alloy steel, die steel,tool steel,cast iron, titanium, aluminum.
*Ideal for side milling, end milling, finish machining. Suitable for the needs of all aspects of the milling.
*Four flute design provides small chip loads and quicker removal
Specification:
*Material: High Speed Steel (HSS)
*Type: Milling Cutter
*Quantity: 10PCS
*Cutter Sizes: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm
Package Contents:
10 x HSS Straight Shank Milling Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

3 Flute Chamfer Bevel Cutters 6.3-20.5mm Chamfering Workshop Equipment
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Flutes: Three Edge Bevel
*Material: HSS
*Quantity: 6 pcs
*Shank: round handle
*Sizes: 6.3mm / 8.3mm / 10.4mm / 12.4mm / 16.5mm / 20.5mm (Approx.)
Package Contents:
6*Chamfer Bevel Cutters
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Countersink Drill Bit Metric Drill Bit HSS High strength Quality 6pcs Drill
Features:Perfect for soft tapping metal, Aluminum, Wood, Plastic, etc.
Multi-use drill tap deburr countersink hex bit kit.
The advantage is opening, tapping, chamfering.
Hole drilling, tapping and deburring/countersinking.
Decrease processing steps and save time, improve working efficiency.
Back tapered tap to prevent thread damage from over-drilling.
Its a spiral groove, within the processing thread, cutting up to exclude, and was curled applied internally threaded through holes.You can also insert the screws in the hole where have been drilled.
Specifications:
Color: Silver
Type: Tap Drill Bit
DIY Supplies: Metalworking
Material: High Speed Steel (HSS)
Shank: 1/4" (6.35mm) hex shank
Surface treatment:Titanium Coated
Thread Diameter:M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
Package Included:6x Drill Tap Countersink
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Flutes: Three Edge Bevel
*Material: HSS
*Quantity: 6 pcs
*Shank: round handle
*Sizes: 6.3mm / 8.3mm / 10.4mm / 12.4mm / 16.5mm / 20.5mm (Approx.)
Package Contents:
6*Chamfer Bevel Cutters
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:Perfect for soft tapping metal, Aluminum, Wood, Plastic, etc.
Multi-use drill tap deburr countersink hex bit kit.
The advantage is opening, tapping, chamfering.
Hole drilling, tapping and deburring/countersinking.
Decrease processing steps and save time, improve working efficiency.
Back tapered tap to prevent thread damage from over-drilling.
Its a spiral groove, within the processing thread, cutting up to exclude, and was curled applied internally threaded through holes.You can also insert the screws in the hole where have been drilled.
Specifications:
Color: Silver
Type: Tap Drill Bit
DIY Supplies: Metalworking
Material: High Speed Steel (HSS)
Shank: 1/4" (6.35mm) hex shank
Surface treatment:Titanium Coated
Thread Diameter:M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
Package Included:6x Drill Tap Countersink
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Step Conical-Cone Drill Bit Hole Cutter 4-32MM Titanium Nitride Coated
Description:100% brand new and high quality
Titanium Nitride Coated, reduce friction and heat and increased service life.
3-sided leg design to prevent slipping when in the feed.
Two-flute design gives you faster, smoother cutting.
4-32mm in 15 steps (4,6,8,10,12,14,16,18,20,22,24,26,28,30,32 mm).
Material: high speed steel
Shank diameter: 10mm
Surface treatment: Nitriding (black)
Weight: about 155g
Package:1 Pcs of 4-32MM Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Hole Set Glass Drill Saw Tile Diamond Marble Bit 8mm-50mm Stone 8 -50mm 10x Tool
Description:
*This diamond hole saws set is great for home use, hobby, craft, construction etc.
*Excellent for making clean and accurate hole on glass and tile.
*It can be used with any drill or power tool.
*Good performance and service long life.
*These diamond bits are capable of drilling into extremely hard materials such as stone and glass.
*100% brand new and in good condition.
*Color: As pictures show
*Material: nickel plated
*Hole saw diameters: 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.63", 18mm/0.71", 20mm/0.79", 22mm/0.87", 25mm/0.98", 50mm/1.97"
Package including:
1 * Diamond Hole Saws Set(10pcs)
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

8mm-50mm Diamond Core Drill Bits Set Hole Saw Cutting Tools Tile Ceramic Glass
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This set of diamond hole saws is ideal for home use, hobbies, crafts, construction, etc.
*Ideal for cleaning, accurate holes in glass and ceramic tiles.
*It can be used with any rig or power tool.
*Good performance and long service life.
*These diamond drill bits can be drilled into very hard materials such as stone and glass.
*Color: Silver(As pictures show)
*Material: Diamond
*Hole Saw Diameter(Approx.): 8 mm / 0.31 inch, 10 mm / 0.39 inch, 12 mm / 0.47 inch, 14 mm / 0.55 inch, 16 mm / 0.63 inch, 18 mm / 0.71 inch, 20 mm / 0.79 inch, 22 mm / 0.87", 25mm / 0.98", 50mm / 1.97"
Package Contents:
10pcs/Set Hole Opener
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*This set of diamond hole saws is ideal for home use, hobbies, crafts, construction, etc.
*Ideal for cleaning, accurate holes in glass and ceramic tiles.
*It can be used with any rig or power tool.
*Good performance and long service life.
*These diamond drill bits can be drilled into very hard materials such as stone and glass.
*Color: Silver(As pictures show)
*Material: Diamond
*Hole Saw Diameter(Approx.): 8 mm / 0.31 inch, 10 mm / 0.39 inch, 12 mm / 0.47 inch, 14 mm / 0.55 inch, 16 mm / 0.63 inch, 18 mm / 0.71 inch, 20 mm / 0.79 inch, 22 mm / 0.87", 25mm / 0.98", 50mm / 1.97"
Package Contents:
10pcs/Set Hole Opener
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Socket Adapter Socket Adapter W/ 3/8" Quick Release Impact Durable Practical
Description:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
(3/8" x 24 UNF) keyless Drill Chuck:*Takes drill bits up to 10mm.
*3/8" Unf female thread mount which fits all drills.
*Keyless chuck for fast bit change.
*Clamping range: 0.8-10mm
*Thread:3/8-24UNF
*Allows The Chuck To Be Used In Any Cordless Drill Hex Bit Holder
*For Swapping Quickly Between Drilling & Screwdriving
Material: high speed steel
1/2" Dr to 1/4" Hex Adapter :*Quick Release Impact, Hex Shank Adapter
*Material:Tungsten steel
*Color:Black
*used for hex shank Screwdriver bit,socket adapter,step drill,chamfer,wrench
converter.
Package Contents:
1pc 3/8" 10mm Keyless Chuck With Adaptor
1pc 1/2" Square to 1/4" Hex Shank Socket Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tool Drill Bit CNC Workholding 6pcs Countersink Champer Milling Useful
Features:
Natural color three edge mill cutter
It is suitable for use in the work-piece which the hardness is under 25 degrees,
Such as aluminum sheet, thin iron plate, the insulating board or PVC board
It's very sharp and durable,you use it for a long time.
Specification:
Size:
6.3mm: Head diameter 6.3mm, shank diameter 5mm, total length 37mm;
8.3mm: Head diameter 8.3mm, shank diameter 6mm, total length 40mm;
10.4mm: Head diameter 10.4mm, shank diameter 6mm, total length 39mm;
12.4mm: Head diameter 12.4mm, shank diameter 10mm, total length 46mm;
16.5mm: Head diameter 16.5mm, shank diameter 10mm, total length 47mm;
20.5mm: Head diameter 20.5mm, shank diameter 10mm, total length 47mm;
Material: HSS(high speed steel)
Quantity: 6pcs/kit
Package Contents:
6 * Drill Bits
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

7x Drill Bit Wood 5 Flute HSS Countersink Kit 3 4 5 6 7 8 10mm Carpentry Tools
Features:
Single flute edge chamfer 90 degree.
Heat treated & tempered high-carbon steel with Titanium Nitrate coating for superior cutting power.
Use on steel, aluminum & other metals, plastic or wood.
Enlarge or countersink holes, deburr edges.
Specification:
Material: HSS Drill 4241
Black Chamfer Drill Body Material: Steel #45
Dimension:
3mm(Dia) x 60mm(L)
4mm (Dia)x 75mm(L)
5mm(Dia) x 85mm(L)
6mm (Dia)x 93mm(L)
7mm(Dia) x 10mm(L)
8mm (Dia)x 11mm(L)
10mm(Dia) x 12mm(L)
Package Contents:
7 * Woodworking Chamfer
1 * L-wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Drill Bit Storage Case Organizer Stand Box 100 Holes Practical Hot sale
Features:
*100% brand new and high quality.
*This product is designed to store nail drill bits.
*Firm and flat PP base, won't slip easily.
*If you always look for those tiny bits, you definitely need this organizer.
*The storage stand totally include 100 holes, can be used to store many nail drill bits.
*Drill bit storage case can make nail drill bits look tidy and orderly, is safe and convenient to use.
Specifications:
*Material: PP
*Number of Holes: 100
*91 Holes: 1mm-10mm (Difference 0.1mm)
*Other Holes: 10.5mm, 10.8mm, 11.0mm, 11.5mm, 11.8mm, 12.0mm, 12.5mm, 12.8mm, 13.0mm.
*Features: Storage Tool, Easy to Use, Convenient
*Size: 17.5cm x 17.5cm x 8cm/6.89" x 6.89" x 3.15" (Approx.)
Package Contents:
1pcs x Drill Bit Storage Case (Others not Included)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Countersink Drill Bits Wood Plug Cutter Tool 1 Set 10X 1/4 Hex 1/4'' Hex
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*The drill bit is made of heat-treated and tempered titanium alloy-coated high-speed steel, which has excellent cutting force and durability, and its accuracy is higher than that of ordinary drill bits.
*The countersunk bit has an automatic starting point, and the five-slot design eliminates chatter and vibration, and makes the operation smooth, thereby achieving clean, accurate and burr-free cutting.
*You can drill the screw hole and the counter bore for the screw cap at the same time and keep the two on the same axis.After the screw is screwed, the screw cap is located below the plane of the board.
*The standard 1/4 inch hex handle can be quickly change, and the depth of the secondary sleeve can be adjusted by an Allen key for grub screw heads or deeper covers to cover the matching plug.
* Eject wood chips faster, you can get a smooth surface on any type of hard, soft wood or aluminum.
*Suitable for work pieces with hardness below 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc.
Product parameters:
*Material: High Speed Steel
*Color: as picture shown
*Countersunk Drills Size: 5#, 6#, 8#, 10#, 12#
*Countersunk Drill diameter:
1.98mm (approximately),5/64" drill bit, 3/8" countersink for screw sizes: #5
2.38mm (approximately),3/32" drill bit, 3/8" countersink for screw sizes: #6
2.78mm (approximately),7/64" drill bit, 3/8" countersink for screw sizes: #8
3.175mm (approximately),1/8" drill bit, 3/8" countersink for screw sizes: #10
3.56mm (approximately),9/16" drill bit, 1/2" countersink for screw sizes: #12
*Chamfered Plug Cutters Size: 10MM,14MM,17MM,20MM (as pictures show)
*Plug Cutters Size:12MM,14MM,19MM,22MM (as pictures show)
Package list:
Package1#:5*Countersunk drills
1* Spanner
4*Plug Cutters
Package2#: 5*Countersunk drills
1* Spanner
4*Chamfered Plug Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Countersink Drill Bits Wood Plug Cutter Tool 1 Set 10X 1/4 Hex 1/4'' Hex
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*The drill bit is made of heat-treated and tempered titanium alloy-coated high-speed steel, which has excellent cutting force and durability, and its accuracy is higher than that of ordinary drill bits.
*The countersunk bit has an automatic starting point, and the five-slot design eliminates chatter and vibration, and makes the operation smooth, thereby achieving clean, accurate and burr-free cutting.
*You can drill the screw hole and the counter bore for the screw cap at the same time and keep the two on the same axis.After the screw is screwed, the screw cap is located below the plane of the board.
*The standard 1/4 inch hex handle can be quickly change, and the depth of the secondary sleeve can be adjusted by an Allen key for grub screw heads or deeper covers to cover the matching plug.
* Eject wood chips faster, you can get a smooth surface on any type of hard, soft wood or aluminum.
*Suitable for work pieces with hardness below 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc.
Product parameters:
*Material: High Speed Steel
*Color: as picture shown
*Countersunk Drills Size: 5#, 6#, 8#, 10#, 12#
*Countersunk Drill diameter:
1.98mm (approximately),5/64" drill bit, 3/8" countersink for screw sizes: #5
2.38mm (approximately),3/32" drill bit, 3/8" countersink for screw sizes: #6
2.78mm (approximately),7/64" drill bit, 3/8" countersink for screw sizes: #8
3.175mm (approximately),1/8" drill bit, 3/8" countersink for screw sizes: #10
3.56mm (approximately),9/16" drill bit, 1/2" countersink for screw sizes: #12
*Chamfered Plug Cutters Size: 10MM,14MM,17MM,20MM (as pictures show)
*Plug Cutters Size:12MM,14MM,19MM,22MM (as pictures show)
Package list:
Package1#:5*Countersunk drills
1* Spanner
4*Plug Cutters
Package2#: 5*Countersunk drills
1* Spanner
4*Chamfered Plug Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10pieces/kit HSS Woodworking Countersink Drill Bits Wood Plug Cutter Cutting Set
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*The drill bit is made of heat-treated and tempered titanium alloy-coated high-speed steel, which has excellent cutting force and durability, and its accuracy is higher than that of ordinary drill bits.
*The countersunk bit has an automatic starting point, and the five-slot design eliminates chatter and vibration, and makes the operation smooth, thereby achieving clean, accurate and burr-free cutting.
*You can drill the screw hole and the counter bore for the screw cap at the same time and keep the two on the same axis.After the screw is screwed, the screw cap is located below the plane of the board.
*The standard 1/4 inch hex handle can be quickly change, and the depth of the secondary sleeve can be adjusted by an Allen key for grub screw heads or deeper covers to cover the matching plug.
* Eject wood chips faster, you can get a smooth surface on any type of hard, soft wood or aluminum.
*Suitable for work pieces with hardness below 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc.
Product parameters:
*Material: High Speed Steel
*Color: as picture shown
*Countersunk Drills Size: 5#, 6#, 8#, 10#, 12#
*Countersunk Drill diameter:
1.98mm (approximately),5/64" drill bit, 3/8" countersink for screw sizes: #5
2.38mm (approximately),3/32" drill bit, 3/8" countersink for screw sizes: #6
2.78mm (approximately),7/64" drill bit, 3/8" countersink for screw sizes: #8
3.175mm (approximately),1/8" drill bit, 3/8" countersink for screw sizes: #10
3.56mm (approximately),9/16" drill bit, 1/2" countersink for screw sizes: #12
*Chamfered Plug Cutters Size: 10MM,14MM,17MM,20MM (as pictures show)
*Plug Cutters Size:12MM,14MM,19MM,22MM (as pictures show)
Package list:
Package1#:5*Countersunk drills
1* Spanner
4*Plug Cutters
Package2#: 5*Countersunk drills
1* Spanner
4*Chamfered Plug Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10pieces/kit HSS Woodworking Countersink Drill Bits Wood Plug Cutter Cutting Set
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*The drill bit is made of heat-treated and tempered titanium alloy-coated high-speed steel, which has excellent cutting force and durability, and its accuracy is higher than that of ordinary drill bits.
*The countersunk bit has an automatic starting point, and the five-slot design eliminates chatter and vibration, and makes the operation smooth, thereby achieving clean, accurate and burr-free cutting.
*You can drill the screw hole and the counter bore for the screw cap at the same time and keep the two on the same axis.After the screw is screwed, the screw cap is located below the plane of the board.
*The standard 1/4 inch hex handle can be quickly change, and the depth of the secondary sleeve can be adjusted by an Allen key for grub screw heads or deeper covers to cover the matching plug.
* Eject wood chips faster, you can get a smooth surface on any type of hard, soft wood or aluminum.
*Suitable for work pieces with hardness below 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc.
Product parameters:
*Material: High Speed Steel
*Color: as picture shown
*Countersunk Drills Size: 5#, 6#, 8#, 10#, 12#
*Countersunk Drill diameter:
1.98mm (approximately),5/64" drill bit, 3/8" countersink for screw sizes: #5
2.38mm (approximately),3/32" drill bit, 3/8" countersink for screw sizes: #6
2.78mm (approximately),7/64" drill bit, 3/8" countersink for screw sizes: #8
3.175mm (approximately),1/8" drill bit, 3/8" countersink for screw sizes: #10
3.56mm (approximately),9/16" drill bit, 1/2" countersink for screw sizes: #12
*Chamfered Plug Cutters Size: 10MM,14MM,17MM,20MM (as pictures show)
*Plug Cutters Size:12MM,14MM,19MM,22MM (as pictures show)
Package list:
Package1#:5*Countersunk drills
1* Spanner
4*Plug Cutters
Package2#: 5*Countersunk drills
1* Spanner
4*Chamfered Plug Cutters
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Step drill bit HSS hole Cutter Power tool accessory Part High strength 4PCS
Features:*100% brand new and high quality
*Made of high-quality materials, durable and practical
*This compact kit can replace 28 individual drill bits
*Two-blade design, cutting faster and smoother
*Includes a six-step drill from 3/16 inches to 1/2 inches, a nine-step drill from 1/4 inches to 3/4 inches, and a thirteen-bit drill bit from 1/8 inches to 1/2 inches, Titanium coating
*Applicable to iron plates, steel plates, PV plates, insulating plates and other workpieces with hardness below 25°.
*Use tools: pistol drill and bench drill
*Note: Water cooling during work can effectively extend the service life of the drill bit. The recommended drilling speed is 250-400 rpm!
Specifications:*Material: High Speed Steel Aluminum Alloy
*Color: Gold
*Step Drill Size:As shown
*Center Punch Specification: 130MM
Package Contents:3x Step Drill
1x Center Punch
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Step drill bit HSS hole Cutter Power tool accessory Replacement High strength
Features:*100% brand new and high quality
*Made of high-quality materials, durable and practical
*This compact kit can replace 28 individual drill bits
*Two-blade design, cutting faster and smoother
*Includes a six-step drill from 3/16 inches to 1/2 inches, a nine-step drill from 1/4 inches to 3/4 inches, and a thirteen-bit drill bit from 1/8 inches to 1/2 inches, Titanium coating
*Applicable to iron plates, steel plates, PV plates, insulating plates and other workpieces with hardness below 25°.
*Use tools: pistol drill and bench drill
*Note: Water cooling during work can effectively extend the service life of the drill bit. The recommended drilling speed is 250-400 rpm!
Specifications:*Material: High Speed Steel Aluminum Alloy
*Color: Gold
*Step Drill Size:As shown
*Center Punch Specification: 130MM
Package Contents:3x Step Drill
1x Center Punch
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Tools Socket Drill Bits Equipment Adapters Hammer 6pcs Impact Wrench Useful
Details:
*100% brand new and high quality
*SDS Hex Socket Convert Adapter Electric Hammer Conversion Extension Rod Practical Drill Bit Chuck Adapter.
*One end is 2 pit 2 slot SDS handle, one end is hexagon, hexagon size is the standard 1/4 (Imperial), 6,35mm. Black with a ribbed section can resist larger torque, the other two without flowers are 60mm and 70mm
*Usage: you can use the hammer, impact drill is originally connected conversion for SDS
*Hex socket connection, which can handle all kinds of group head, hexagon chamfering device,drill tool
*The hexagonal shank section is of strong magnetism, and the connection of the head is more stable
*Color: As Pictures Show
*Material: Chrome Vanadium Steel
*Size: 65*13*10mm (Approx.)
Package Contents:
3*Adapters
3*Screwdriver Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Hex Socket Converter Screwdriver Bits Adapter Magnetic Connection Bar Drive Tool
Details:
*100% brand new and high quality
*SDS Hex Socket Convert Adapter Electric Hammer Conversion Extension Rod Practical Drill Bit Chuck Adapter.
*One end is 2 pit 2 slot SDS handle, one end is hexagon, hexagon size is the standard 1/4 (Imperial), 6,35mm. Black with a ribbed section can resist larger torque, the other two without flowers are 60mm and 70mm
*Usage: you can use the hammer, impact drill is originally connected conversion for SDS
*Hex socket connection, which can handle all kinds of group head, hexagon chamfering device,drill tool
*The hexagonal shank section is of strong magnetism, and the connection of the head is more stable
*Color: As Pictures Show
*Material: Chrome Vanadium Steel
*Size: 65*13*10mm (Approx.)
Package Contents:
3*Adapters
3*Screwdriver Bits
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Drill Bit Storage Case Organizer Stand Box 100 Holes Round Shape 1PC New
Features:
*100% brand new and high quality.
*This product is designed to store nail drill bits.
*Firm and flat PP base, won't slip easily.
*If you always look for those tiny bits, you definitely need this organizer.
*The storage stand totally include 100 holes, can be used to store many nail drill bits.
*Drill bit storage case can make nail drill bits look tidy and orderly, is safe and convenient to use.
Specifications:
*Material: PP
*Number of Holes: 100
*91 Holes: 1mm-10mm (Difference 0.1mm)
*Other Holes: 10.5mm, 10.8mm, 11.0mm, 11.5mm, 11.8mm, 12.0mm, 12.5mm, 12.8mm, 13.0mm.
*Features: Storage Tool, Easy to Use, Convenient
*Size: 17.5cm x 17.5cm x 8cm/6.89" x 6.89" x 3.15" (Approx.)
Package Contents:
1pcs x Drill Bit Storage Case (Others not Included)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Specifications:
*100% brand new and high quality
*High hardness drill holder, rust-proof and durable
*Built-in strong magnet, good grip and easy to use
*Suitable for pneumatic screwdrivers, electric screwdrivers, pneumatic drills, etc
*Material: Steel
*Color: As the picture shows
*Size: As the picture shows
Package Include:
1* Drill Bit Socket
3* Drill Extension Bars
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Glass Saw Cutter Drill Bits Set For Cutting Hole Hole Maker 6-35MM 11Pcs
Features:
*100% brand new and high quality.
* Rugged and easy to use, your good assistant for work and life.
*Diamond drill bits, 11 hole saws, diamond coated hollow drill bits, diamond coated, glass, ceramic, porcelain, ceramic tiles, marble, glass ceramic tiles with carbon steel drill bits, ceramic hole saw cutting 11 drill bits set
*This diamond-coated core drill bit can remove a complete circle from glass, marble, tile, granite, ceramic or other materials. They are very suitable for drilling glass, tile bottles, block jars, fiberglass ceramic tiles, plates Rock gable, granite lamp stone
*These diamond drill bits made of high-speed steel are durable, have long service life, high quality, and good performance, which are very suitable for drilling clean and accurate holes.
*Sharp and smooth cutting-The diamond saw blade is coated with high-quality diamonds, which can form a high-precision, smooth cut without folding edges. Reducing the drilling speed, lowering the weight of the bit and increasing the use of water lubrication will greatly extend the drill bit Service life
*Note-When using diamond drill bits, please use lubricant (water), otherwise the diamond core drill will burn. It is not suitable for concrete or where the depth exceeds 1/2".
*Can be used with standard electric drills.
*Always use lubricant (water), otherwise the diamond core drill will burn.
*This diamond-coated core bit can remove a complete circle from glass, marble, ceramic tile, granite, ceramic or other materials.
Specifications:
*Quantity: 11
*Material: diamond, metal
*Color: as shown
*Size: 6/8/10/12/14/16/18/20/22/32/35mm
Package Contents:
11PCS: 6/8/10/12/14/16/18/20/22/32/35mm diamond hole saw bit
Tips:
Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Angle Driver Adapter Drill Bit For Electric drill / hand wrenc Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*105 degree right angle extension piece 1/4" hex driver bit drill bracket attachment
*Better drive screws and holes in tight spaces.
*Can be connected to the drill and hand wrench, this is a wrench that can be extended to places where the drill cannot reach.
Specification:
*Material: Chrome Vanadium Steel
*Short: 5.5cm * 3.2cm / 2.2 * 1.3in(Approx.)
*Long: 13.8cm * 3.2cm / 5.4 * 1.3in(Approx.)
*Hex Handle Diameter: 6.35 mm (1/4 inch)(Approx.)
*Color: Black (As pictures show)
Package Contents:
2* 105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1 X Copper Pipe Quick Expander Carbon Steel Swaging Tool Drill Bit High Quality
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger*6/9.5/12mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1 X Copper Pipe Quick Expander Carbon Steel Swaging Tool Drill Bit High Quality
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger*6/9.5/12mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Expander Swaging Tool Carbon Steel Maintenance Metal Practical Durable
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger-*6.35/9/12.7mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Expander Swaging Tool Carbon Steel Maintenance Metal Practical Durable
Features:
*100% brand new and high quality.
*Carbon Steel Material: Carbon Steel materials. Durable and high-frequency quenching. Does not deform easily.
*Conical Design: The radius of the expanded tube is 12mm, 9.5mm, and 6mm or 6.35/9/13mm respectively.
*It can gradually expand the copper pipe wall when working, without suddenly causing the copper pipe to rupture.
*Electric And Manual: You can directly install the expander bit into your electric drill. It can also be installed in a screwdriver and used manually.
*Work Efficiently: As long as you purchase the right size drill, you can achieve a good fit. It is effortless every time you operate.
*Using Methods: Expand the tube at a low speed. Rounding at high speed after molding.
Specifications:
*Material: Carbon Steel
*Color: Gold, Ginger
*Size: (Approx) gold-6/9.5/12mm-0.24x0.37x0.47inch, Ginger-*6.35/9/12.7mm-0.25x0.35x0.5inch
Package Contents:
1PC x Swaging Tool Drill Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

10pcs Drill Bit Titanium Plating 4.5mm Shank Ceramic Plastic Brand new
Features:
*100% brand new and high quality.
*Fits for glass, ceramic, wood, metal, plastic, tile, cement.
*It can be used with the ordinary drilling hammer.
*It must be add coolant when it is being used.
*When drilling hole, your force should be slow, especially at the beginning of drilling and when it is drilling the glass through.
Specifications:
*Material : carbide alloy
*Surface Treatment: Titanium Plating
* Head Type: Cross Spear Head
*Drill Diameter: 6mm(approximately)
*Shank Diameter: 4.5mm(approximately)
*Total Length: 72mm(approximately)
Package Contents:
10pcs Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Bit High quality Titanium Plating For glass Ceramic Wood Durable
Features:
*100% brand new and high quality.
*Fits for glass, ceramic, wood, metal, plastic, tile, cement.
*It can be used with the ordinary drilling hammer.
*It must be add coolant when it is being used.
*When drilling hole, your force should be slow, especially at the beginning of drilling and when it is drilling the glass through.
Specifications:
*Material : carbide alloy
*Surface Treatment: Titanium Plating
* Head Type: Cross Spear Head
*Drill Diameter: 6mm(approximately)
*Shank Diameter: 4.5mm(approximately)
*Total Length: 72mm(approximately)
Package Contents:
10pcs Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Drill Bit High quality Titanium Plating 4.5mm Shank For glass Wood Metal
Features:
*100% brand new and high quality.
*Fits for glass, ceramic, wood, metal, plastic, tile, cement.
*It can be used with the ordinary drilling hammer.
*It must be add coolant when it is being used.
*When drilling hole, your force should be slow, especially at the beginning of drilling and when it is drilling the glass through.
Specifications:
*Material : carbide alloy
*Surface Treatment: Titanium Plating
* Head Type: Cross Spear Head
*Drill Diameter: 6mm(approximately)
*Shank Diameter: 4.5mm(approximately)
*Total Length: 72mm(approximately)
Package Contents:
10pcs Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

HSS Step Cone Drill Titanium Hole Cutter 4 - 32mm For Steel Brass Wood Plastic
Feature:
*100% brand new and high quality
*Nitriding gold spiral groove drilling ladder 4-32mm
*This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter, which is made from high quality HSS steel
*With the Titanium coated to reduce friction and heat
*It is very suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc
Specification:
*Shank:Triangle round handle
*Material:HSS
*Surface Treatment:nitrogen treatment (increasing the hardness and abrasion resistance)
*stepped:4,6,8,10,12,14,16,18,20,22,24,26,28,30,32 mm
*Shank:10 mm
Package included:
1* Step Cone Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Hex Drill Bit Accessory Replacement Hexagon Tap Countersink 6pcs/set Hot
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Suitable for soft tapping of metal and aluminum. wood. Plastic, etc.
*Multi-purpose drill tap deburring countersink hexagonal bit set.
*The advantages are opening, tapping and chamfering. Drilling, tapping, deburring/counterbore. Reduce processing steps and save time.
*Improve working efficiency Reverse taper taps to prevent damage to threads due to over-drilling of threaded joints. 1/4-inch hexagonal shank is quick and easy to replace.
*Self-centering point, no need for auxiliary center drill or center punch steel drill.
*Suitable for drilling wood. plastic. Fine copper. One step processing. Greatly reduce processing steps, save time and improve work efficiency
Specifications:
*Material:HSS
*Color:Silver (As Pictures Show)
*Size:As Pictures Show
*Quantily:6PCS
Package Contents:
6*Drill Bits
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Step Cone Drill Bit Hole Cutter tool Spiral Step Cone Step Drill Drill Bit Metal
Feature:
*100% brand new and high quality
*Nitriding gold spiral groove drilling ladder 4-32mm
*This is the New HSS Steel Large Step Cone Drill Titanium Bit Set Hole Cutter, which is made from high quality HSS steel
*With the Titanium coated to reduce friction and heat
*It is very suitable for using to cut holes in a variety of materials including steel, brass, wood, plastic, etc
Specification:
*Shank:Triangle round handle
*Material:HSS
*Surface Treatment:nitrogen treatment (increasing the hardness and abrasion resistance)
*stepped:4,6,8,10,12,14,16,18,20,22,24,26,28,30,32 mm
*Shank:10 mm
Package included:
1* Step Cone Drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

105° Driver Adapter 3pcs 1/4" Hex Shaft Drill Bit Magnetic Screwdriver Extension
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Screwdriver extensions Steel Black 105° Angle Driver Adapter Practical
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

For hand-held drivers Screwdriver extensions For power drills Steel Black
Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Extend all kinds of screwdriver bits,screwdriver head conversion uses.Fast fastening,greatly improve work efficiency
*For use in hand-held drivers or power drills, this 1/4 inch female by 1/4 inch male magnetic bit holder
*Very helpful to remove or tighten a large number of screws after you've started or loosened them
*Use with charging screwdriver or power drill. The maximum torque of this 105 degree Angle Driver adapter is 10N and it is only for right angle head.
*NOT FOR impact drill.
*Please adjust the torque to a minimum when using the electric screwdriver. Do not rely on it to tighten the screws if the hand drill is used.
Specifications:
*Material: Stainless Steel Chrome Vanadium Steel
*Color: Black
*Holder length: 60mm/100mm/150mm
*Hex shank: 6.35mm( 1/4" )
*Fit for: 1/4" shank dirver bit
Package Contents:
3*1/4" Hex shaft screwdriver extensions
1*105° Angle Driver Adapter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.